OPTIMIZATION OF ALKALINE AND DILUTE ACID PRETREATMENT OF AGAVE BAGASSE BY RESPONSE SURFACE METHODOLOGY

In light of this, this paper presents the discrete–continuous optimization methodology for solving the problem of optimal integration of PV DGs in electrical networks; by implementing

Although differences in the specific surface area, the ZnPc1 loading and, in turn, the charge injection are identified as the main reasons for increasing J SC s and  s

Suspect screening and target quantification of multi-class pharmaceuticals in surface water based on large-volume injection liquid chromatography and time-of-flight

The experimental investigation presents the effect of the machining parameters (spindle speed, feed rate, axial depth of cut, radial depth of cut and weight percentage of SiC p ) on

In this study the ANN model is developed based on the exper- imental results of surface roughness obtained from Taguchi’s design for experimentation and prediction of surface

In this investigation, the methodology of surface optimization will be applied to evaluate the effect of three independent variables (time, concentration of sulfuric acid and

To this end, a Box-Behnken Design was carried out to study the influence of the curcumin amount, the structurant concentration and the manufacturing temperature on the oxidation

To evaluate the effect of the flocculant on the suspended particle size, the initial sample (Sample A) and a sample of the biogenic sulfur present clarified effluent after the