• No se han encontrado resultados

TítuloSimultaneous utilization of fine and coarse recycled concrete aggregate for the fabrication and experimental analysis of the structural performance of precast reinforced and prestressed concrete elements

N/A
N/A
Protected

Academic year: 2020

Share "TítuloSimultaneous utilization of fine and coarse recycled concrete aggregate for the fabrication and experimental analysis of the structural performance of precast reinforced and prestressed concrete elements"

Copied!
326
0
0

Texto completo

Loading

Figure

Figure 1.1.  Elevated highways, Segundos Pisos at Mexico City 
Figure 2.2.  CDW: Material recovery & backfilling (2011) 
Table 2.2.  Material composition of some European countries (after the exclusion of  excavation material) 
Figure 2.4.  Transfer length and development length of pretensioned strands  [ABRI 1993] 
+7

Referencias

Documento similar

The tests revealed that the proposed method of thermal-mechanical treatment of concrete debris from the demolition of structural elements of a 30-year-old industrial hall allows

The draft amendments do not operate any more a distinction between different states of emergency; they repeal articles 120, 121and 122 and make it possible for the President to

H I is the incident wave height, T z is the mean wave period, Ir is the Iribarren number or surf similarity parameter, h is the water depth at the toe of the structure, Ru is the

Since such powers frequently exist outside the institutional framework, and/or exercise their influence through channels exempt (or simply out of reach) from any political

Of special concern for this work are outbreaks formed by the benthic dinoflagellate Ostreopsis (Schmidt), including several species producers of palytoxin (PLTX)-like compounds,

In the previous sections we have shown how astronomical alignments and solar hierophanies – with a common interest in the solstices − were substantiated in the

Abstract The absence of universally accepted solu- tions for the design of reinforcement in plates and shells in the structural concrete codes, and the constant development of

This latter objective function is usually used in the field of structural optimisation, although it is interesting to keep others in mind such as the strain energy, because of