• No se han encontrado resultados

InSAR compatible ground motions for northern Chile

N/A
N/A
Protected

Academic year: 2020

Share "InSAR compatible ground motions for northern Chile"

Copied!
139
0
0

Texto completo

Loading

Figure

Figure II.3: Data flowchart for SAR, InSAR and D-InSAR processing
Figure II.7: Baseline-corrected ground motions for the Tocopilla (2007) earthquake in the east-west direction: (a) acceleration;
Table II.1: Summary of peak ground values and co-seismic displacements inferred from InSAR
Figure VI.2: (a) InSAR Imaging Geometry, (b) D-InSAR Imaging Geometry showing range change between acquisitions
+7

Referencias

Documento similar

The response of the synchronization circuit is shown in figure 7; where the upper trace corresponds to line L AC , and the lower trace is the voltage at the input of the VCO; as can

Figure 12: Influence of the scraping velocity on the heat transfer coefficient averaged over the freezing period for different scrapper systems and Δ T log values. Figure 13: Δ

The host star peak intensity (blue line), the companion intensity (green line), the inverse of the averaged intensity in an area surrounding the central peak (red line) and

Ripley’s synthetic training set with the Bayes border (solid line) and the class borders computed with lear1NN for 2 (dotted line), 6 (dashed line) and 32 (dashdot line)

Algorithm 1 describes such calculation: for each possible configuration (line 4) calculates the weighted mean of the mean response time for each state combination of a provider

The graph on the right gives the maximum bias bounds (`(), solid line; u() dotted-dashed line) for an MM-estimate based on biweight loss functions with 50% breakdown point and

ACS Paragon Plus Environment.. 24 diagrams of the direct DNA sensor response to clinical samples; d) bar diagrams of the. response to clinical samples of a sensor prepared

In Figure 11(d), simulated red light illuminated IV curves are shown for acceptor-type defect states in the CdS and a conduction band spike at the CISe/CdS interface (model B1)