• No se han encontrado resultados

Effect of annealing and UV radiation time over micropore architecture of self assembled block copolymer thin film

N/A
N/A
Protected

Academic year: 2020

Share "Effect of annealing and UV radiation time over micropore architecture of self assembled block copolymer thin film"

Copied!
12
0
0

Texto completo

Loading

Figure

Figure 1. Representation of hydrolysis process for functional hydrophilic microdomains of PS-b-MMA/MAA block poly- poly-mer
Figure 3. TGA / DSC thermogram of PS-b-MMA/MAA block copolymer. Heating rate 10°C/min
Figure 5. Cyclic voltammetric response of glassy carbon electrode cycled in a solution containing  PS-b-MMA/MAA block copolymer and target
Table 1. Thin films thickness obtained using VHRE

Referencias

Documento similar

The aim of this study was to examine the effect of the use of the flipped classroom on the level of self-efficacy and the assessment of clinical competencies in nursing

In this section we present and analyze elements from the two student films and from self-assessments by these students. The analyses discuss various qualities in the films based

The present work focuses on the pulsed laser deposition of SmCo thin films on Si(1 0 0) substrate, by varying the laser shots in order to get thin films of varying thicknesses, and

Abstract: Transepidermal water-loss (TEWL), stratum-corneum hydration (SCH), erythema, elas- ticity, pH and melanin, are parameters of the epidermal barrier function and

In the previous sections we have shown how astronomical alignments and solar hierophanies – with a common interest in the solstices − were substantiated in the

The zinc nitride thin film is deposited by magnetron radio-frequency sputtering at room temperature, while spin-on glass and aluminum were used as gate insulator and

However, the sulfurization temperature is the parameter that regulates the formation of an orthorrombic single phase SnS thin film with the optimum properties to be used

The influence of the presence of rGO and the photocatalyst concentration on the radiation absorption inside the reactor was evaluated by solving a radiation model