TítuloMechanical properties of hot mix asphalt made with recycled concrete aggregates coated with bitumen emulsion
Texto completo
Documento similar
Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials.. Shima Pilehvar a,b
This study employs a test protocol based on a 3-point bending DMA (Dynamic Mechanical An- alyzer) configuration to assess the influence of the type of filler and the bitumen
In recycled PLA obtained from slightly degraded PLA, the addition of fibroin obtained by acid hydrolysis and high molecular weight chitosan led to some degradation of the polymer,
Se ha incluido un estudio de hormigones considerando la adición de un porcentaje fijo de cemento con la sustitución total del árido grueso natural por reciclado de
emulsion á la fécula emulsion á la gelatina emulsion al almidon emulsion al colodion.. emulsion Chardon emulsion de
We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked
- The lower density and higher water absorption values of the TCWA recycled aggregates, compared with the natural limestone and siliceous aggregates, mean that it is necessary to
However, mortars made with recycled aggregates from CDW are more porous than those made with natural aggregates, which can impair the diffusion leaching phenomena of monolithic