• No se han encontrado resultados

Multifactorial study of erosion corrosion mechanisms in the wear of a low carbon steel by slurry of copper tailing

N/A
N/A
Protected

Academic year: 2020

Share "Multifactorial study of erosion corrosion mechanisms in the wear of a low carbon steel by slurry of copper tailing"

Copied!
125
0
0

Texto completo

Loading

Figure

Figure 2.1 Diagram of forces acting on a particle in contact with a solid surface (Hutchings, 1992)
Figure 2.3 Scheme of material removal rates as a function of time for the erosion process (Wood et al.,  2013)
Figure 2.5 Examples of simple-impact craters at different angles of impingement. (a) Micromachining- Micromachining-type craters; (b) Plowing-Micromachining-type craters; (c) Lip formation-Micromachining-type craters; (d) Indentation-Micromachining-type cr
Figure 2.6 Example of spherical, rounded and angular particles. Adapted from Stachowiak et al
+7

Referencias

Documento similar

The draft amendments do not operate any more a distinction between different states of emergency; they repeal articles 120, 121and 122 and make it possible for the President to

Consequently, OMVs may enhance copper toxicity in bacterial interactions by concentrating the metal and ensure more focused transport and intervention of the metal during

The purpose of the research project presented below is to analyze the financial management of a small municipality in the province of Teruel. The data under study has

In the evaluation of pipes of carbon steel used for the supply of potable water are detected structural problems in the SAE 1018 carbon steel, with which were manufactured

Figure 3 and Figure 4 present the Nyquist diagrams of low carbon steel AISI 1018 registered in the model acetic solution, in the presence of kerosene (hydrocarbon), through

Apostolopoulos [36] tested under laboratory conditions a steel alloy (S500s, Tempcore), to study the effect of the strain level and the corrosion duration on the number

These studies are proposed as an alternative to the processes in which it is used as complexing agent cyanide [8] [9], within this framework, it has also been proposed and studied

The potential displacement of reduction process at less negative values in the voltammograms and the changes in cathodic charge when iridium is present in the solution at