INSTALLATION INSTRUCTIONS FOR PART INST-581FD APPLICATIONS
METRA. The World’s best kits.
™1-800-221-0932
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATIONREV
. 9/19/2013 INST
-581FD CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. NOTE: Refer to the instructions included with the aftermarket radio.
• Double DIN radio provision • Stacked ISO units provision • DIN radio provision with pocket • ISO DIN radio provision with pocket
• A) Radio housing (Double DIN and stacked ISO DIN) • B) Double DIN brackets • C) Spacers • D) (4) Screws • E) Radio housing • F) ISO brackets • G) Trim plate
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness:
• Please visit www.metraonline.com for specific interface applications
Antenna Adapter:
• 40-CR10 - Chrysler antenna adapter 2002-up
• Cutting tool • Panel removal tool • Phillips screwdriver • Socket set TOOLS REQUIRED
Ford/Lincoln/Mercury 2004-2008
AT-581FD/AW-581FD/CF-581FD/IBR-581FD
See application list inside
B C
A D E
INST-581FD
Applications
Ford Edge ...2007-2008 Expedition ...2007-2008 Explorer ...2006-2008 Explorer Sport Trac ...2006-2008 F-150 ...2004-2008 F-Series Super Duty ...2005-2008 Five Hundred ...2005-2007 Focus ...2005-2007 Freestar ...2004-2007 Freestyle ...2005-2007 Fusion ...2006-2008 Mustang ...2005-2009 Taurus ...2008 Taurus X ...2008 Super Duty ...2008 Lincoln Mark LT ...2005-2008 MKX ...2007-2009 Navigator ...2007-2008 Mercury Milan ...2006-2008 Mountaineer ...2006-2008 Monterey ...2004-2007 Montego ...2005-2007 Sable ...2008Table of Contents
Dash Disassembly - Ford Edge/Expedition 2007-2008 ...3- Ford Explorer/Explorer Sport Trac 2006-2008 ...6
- Ford F-150 2004-2008 ...3
- Ford F-Series Super Duty 2005-2008 ...7
- Ford Five Hundred 2005-2007 ...4
- Ford Focus 2005-2007 ...6 - Ford Freestar 2004-2007 ...5 - Ford Freestyle 2005-2007 ...5 - Ford Fusion 2006-2008 ...4 - Ford Mustang 2005-2009 ...3 - Ford Taurus 2008...4 - Ford Taurus X 2008 ...5
- Ford Super Duty 2008 ...7
- Lincoln Mark LT 2005-2008 ...3 - Lincoln MKX 2007-2009 ...8 - Lincoln Navigator 2007-2008 ...8 - Mercury Milan 2006-2008 ...4 - Mercury Mountaineer 2006-2008 ...6 - Mercury Monterey 2004-2007 ...5 - Mercury Montego 2005-2007 ...4 - Mercury Sable 2008 ...4 Kit Assembly - Double DIN radio provision ...9
- Stacked ISO unit provision ...10
- DIN radio provision with pocket ...11
3
Dash Disassembly INST-581FD
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32” screws to remove the factory radio. (Figure B)
Continue to kit assembly
Ford F-150 2004-2008,
Ford Expedition/Edge
2007-2008, Lincoln Mark
LT 2005-2008
1. Remove the small rectangular shifter lever trim panel if equipped. (Figure A)
2. Remove (2) Phillips screws from under the center armrest at the back of the shifter trim panel (including cup holders). (Figure B)
3. Unclip and remove panel. (Figure B)
4. Unclip and remove the (2) center stack trim panels from the left and right side of the radio and climate controls. (Figure C)
5. Remove (6) 9/32” screws from center trim panel surrounding the radio and climate controls then unclip and remove panel. (Figure D)
6. Remove (4) 9/32” screws from the radio to remove. (Figure E)
Continue to kit assembly
Ford Mustang 2005-2009
(Figure B) (Figure A) (Figure B) (Figure A) (Figure D) (Figure C) (Figure E)Dash Disassembly INST-581FD
1. Unclip and remove the small rectangular trim around shift lever. (Figure A)
2. Unclip and remove the entire panel (including cup holders) surrounding the shift lever. (Figure B)
3. Remove (2) 9/32” screws at the bottom of the center radio/climate control panel. (Figure C)
4. Unclip and remove the center panel. (Figure D)
5. Remove (4) 9/32” screws from the radio to remove. (Figure E)
Continue to kit assembly
Ford Five Hundred 2005-2007/Taurus 2008
Mercury Montego 2005-2007/Sable 2008
(Figure B) (Figure A)
(Figure D)
(Figure C)
(Figure E)
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32” screws to remove the factory radio. (Figure B)
Continue to kit assembly
Ford Fusion 2006-2008
Mercury Milan 2006-2008
(Figure B) (Figure A)
5
Dash Disassembly INST-581FD
1. Unclip and remove entire panel surrounding the radio and A/C controls. (Figure A)
2. Remove (4) 9/32” screws from radio to remove. (Figure B) Continue to kit assembly
Ford Freestyle 2005-2007
Ford Taurus X 2008
(Figure B)
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32” screws to remove the factory radio. (Figure B)
Continue to kit assembly
(Figure B)
Ford Freestar 2004-2007
Mercury Monterey 2004-2007
Dash Disassembly INST-581FD
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32” screws to remove the factory radio. (Figure B)
Continue to kit assembly
Ford Focus 2005-2007
(Figure B)
1. Open center console and remove (2) Phillips screws then unclip and remove entire panel surrounding shifter. (Figure A)
2. Remove dash panel surrounding radio to access the factory radio screws. (Figure B)
3. Remove (4) 9/32” screws to remove the factory radio. (Figure C)
Continue to kit assembly
Ford Explorer/Explorer Sport Trac
2006-2008, Mercury Mountaineer
2006-2008
(Figure A) (Figure C) (Figure B) (Figure A)7
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32” screws to remove the factory radio. (Figure B)
Continue to kit assembly
Ford F-Series Super Duty 2005-2008
Ford Super Duty 2008
Dash Disassembly INST-581FD
(Figure A)
1. Unclip and remove the power outlet panel and the blank panel on the left and right side of the radio trim panel. (Figure A)
2. Remove the (2) 9/32” screws exposed behind the two panels previously removed.
3. Unclip and remove the entire radio trim panel including the A/C control and vents.
4. Remove (4) 9/32” screws securing the radio.
Continue to kit assembly
Dash Disassembly INST-581FD
1. Open center console lid and unclip and remove the center console trim panel surrounding the shifter. (Figure A)
2. Remove (2) Phillips screws from the storage bin then unclip and remove the bin. (Figure B)
3. Unclip and remove the upper and lower center trim panel as one assembly. (Figure C)
4. Remove (4) 9/32” screws securing the radio. Unplug and remove the radio.
Continue to kit assembly
Lincoln MKX 2007-2009
(Figure C) (Figure B)
(Figure A)
1. Unclip and remove the panel surrounding the shifter. (Figure A)
2. Remove (2) 9/32” screws from the bottom of the radio/climate control trim panel. (Figure B)
3. Unclip and remove the entire panel surrounding the radio and including the climate controls. (Figure B)
4. Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio. Continue to kit assembly
Lincoln Navigator
2007-2008
(Figure B) (Figure A)
9
Kit Assembly INST-581FD
1. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer/ Fusion/Mercury Milan, 2004-2007 F-150, 2005-2004-2007 Five Hundred/Freestyle/Mustang/ Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Super Duty, cut and remove the rear mounting tabs from the Double DIN Brackets.
If your vehicle is not listed above move to Step 2.
2. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer, 2006-2007 Fusion, 2007 Mustang and the 2008 Super Duty attach the included spacers to the back of the radio housing mounting tabs. (Figure A) If your vehicle is not listed above move to Step 3.
3. Attach the double DIN brackets to the radio housing. (Figure B and C) Note: The notch in the housing should be on top.
4. Slide the Double DIN radio into the radio housing/bracket assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure D)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
Double DIN radio provision
Kit Assembly INST-581FD
1. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer/ Fusion/Mercury Milan, 2004-2007 F-150, 2005-2004-2007 Five Hundred/Freestyle/Mustang/ Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Ford Super Duty, cut and remove the rear mounting tabs from the Double DIN Brackets.
If your vehicle is not listed above move to Step 2.
2. For the 2007 Ford Edge/ Expedition, 2006-2007 Ford Explorer, 2006-2007 Ford Fusion, 2007 Mustang and the 2008 Super Duty attach the included spacers to the back of the radio housing mounting tabs. (Figure A) If your vehicle is not listed above move to Step 3.
3. Attach the double DIN brackets to the radio housing.
Note: The notch in the housing should be on top. (Figure B and C)
4. Slide the ISO mount units into the radio housing/bracket assembly and secure the units to the assembly using the screws supplied with the units. (Figure D)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
Stacked ISO units provision
11
Kit Assembly INST-581FD
1. (a) For the Ford Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 attach the included spacers to the back of the radio housing mounting tabs. (Figure A)
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
(b) For the Ford Freestar 2004-2007, Monterey 2004-2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007, slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward. (Figure B)
If your vehicle is not listed above move to Step 2.
2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure C)
3. Slide the aftermarket radio into the cage until it snaps in place. (Figure D)
4. Locate the factory wiring harness in the dash. Metra recommends using
the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
5. Reassemble dash in reverse order of disassembly.
DIN radio provision with pocket
Kit Assembly INST-581FD
1. (a) For the Ford Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 attach the included spacers to the back of the radio housing mounting tabs. (Figure A)
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
(b) For the Ford Freestar 2004-2007, Monterey 2004-2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007, slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward. (Figure B)
If your vehicle is not listed above move to Step 2.
2. Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure C)
3. Slide the head unit into the radio opening until the side clips engage. (Figure D)
4. Snap the Trim plate into the Radio Housing. (Figure D)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
ISO radio provision with pocket
INST-581FD
INST-581FD
INST-581FD
INSTALLATION INSTRUCTIONS FOR PART INST-581FD
METRA. The World’s best kits.
™1-800-221-0932
metraonline.com
REV
. 9/19/2013 INST
-581FD
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD APLICACIONES
METRA. The World’s best kits.
™1-800-221-0932
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATIONREV
. 9/19/2013 INST
-581FD PRECAUCIÓN: Metra recomienda desconectar el terminal
negativo de la batería antes de comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar el ciclo de ignición.
NOTA: Remítase a las instrucciones incluidas con el radio de postventa.
• Provisión radio doble DIN • Provisión de radio ISO vertical • Provisión radio DIN con bolsillo • Provisión radio DIN ISO con bolsillo
• A) Carcasa del radio (Doble DIN e ISO DIN vertical) • B) Soportes doble DIN • C) Espaciadores • D) (4) tornillos • E) Carcasa del radio • F) Soportes ISO • G) Placa de moldura
CARACTERÍSTICAS DEL KIT
COMPONENTES DEL KIT
• Herramienta de corte • Herramienta de remoción de panel • Destornillador Phillips • Toma de conjunto HERRAMIENTAS REquERIDAS
Ford/Lincoln/Mercury 2004-2008
AT-581FD/AW-581FD/CF-581FD/IBR-581FD
Lista de aplicaciones dentro
CABLEADO Y CONEXIONES DE ANTENA Arnés de cableado:
• Visite www.metraonline.com para ver aplicaciones específicas de interfase Adaptador de antena:
• 40-CR10 - Cable adaptador de antena Chrysler 2002
(se venden por separado)
B C
A D E
INST-581FD
Aplicaciones
Ford Edge ...2007-2008 Expedition ...2007-2008 Explorer ...2006-2008 Explorer Sport Trac ...2006-2008 F-150 ...2004-2008 F-Series Super Duty ...2005-2008 Five Hundred ...2005-2007 Focus ...2005-2007 Freestar ...2004-2007 Freestyle ...2005-2007 Fusion ...2006-2008 Mustang ...2005-2009 Taurus ...2008 Taurus X ...2008 Super Duty ...2008 Lincoln Mark LT ...2005-2008 MKX ...2007-2009 Navigator ...2007-2008 Mercury Milan ...2006-2008 Mountaineer ...2006-2008 Monterey ...2004-2007 Montego ...2005-2007 Sable ...2008Índice
Desmontaje del tablero - Ford Edge/Expedition 2007-2008 ...3- Ford Explorer/Explorer Sport Trac 2006-2008 ...6
- Ford F-150 2004-2008 ...3
- Ford F-Series Super Duty 2005-2008 ...7
- Ford Five Hundred 2005-2007 ...4
- Ford Focus 2005-2007 ...6 - Ford Freestar 2004-2007 ...5 - Ford Freestyle 2005-2007 ...5 - Ford Fusion 2006-2008 ...4 - Ford Mustang 2005-2009 ...3 - Ford Taurus 2008...4 - Ford Taurus X 2008 ...5
- Ford Super Duty 2008 ...7
- Lincoln Mark LT 2005-2008 ...3 - Lincoln MKX 2007-2009 ...8 - Lincoln Navigator 2007-2008 ...8 - Mercury Milan 2006-2008 ...4 - Mercury Mountaineer 2006-2008 ...6 - Mercury Monterey 2004-2007 ...5 - Mercury Montego 2005-2007 ...4 - Mercury Sable 2008 ...4
Ensamble del kit - Provisión radio doble DIN ...9
- Stacked ISO unit provision ...10
- Provisión radio DIN con bolsillo ...11
3
Desmontaje del tablero INST-581FD
1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A)
2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B)
Continuará al ensamble del kit
Ford F-150 2004-2008,
Ford Expedition/Edge
2007-2008, Lincoln Mark
LT 2005-2008
1. Quite el pequeño panel de la moldura de la palanca de velocidades si se incluye. (Figura A)
2. Quite los (2) tornillos Phillips de debajo del descansabrazos central en la parte posterior del panel de la moldura de la palanca de velocidades (incluyendo los portavasos). (Figura B)
3. Desenganche y quite el panel. (Figura B)
4. Desenganche y quite los (2) paneles de moldura de la pila central del lado izquierdo y derecho del radio de fábrica y los controles del clima. (Figura C)
5. Quite los (6) tornillos de 9/32” del panel de moldura central que rodea el radio y los controles del clima y luego desenganche y quite el panel. (Figura D)
6. Quite los (4) tornillos de 9/32” del radio para quitarlo. (Figura E)
Continuará al ensamble del kit
Ford Mustang 2005-2009
(Figura B) (Figura A) (Figura B) (Figura A) (Figura D) (Figura C) (Figura E)Desmontaje del tablero INST-581FD
1. Desenganche y quite la pequeña moldura rectangular que rodea la palanca de velocidades. (Figura A)
2. Desenganche y quite todo el panel (incluyendo los portavasos) que rodea la palanca de velocidades. (Figura B)
3. Quite los (2) tornillos de 9/32” de la parte inferior del panel central de control del radio/clima. (Figura C)
4. Desenganche y quite el panel central. (Figura D)
5. Quite los (4) tornillos de 9/32” del radio para quitarlo. (Figura E)
Continuará al ensamble del kit
Ford Five Hundred 2005-2007/Taurus 2008
Mercury Montego 2005-2007/Sable 2008
(Figura B) (Figura A)
(Figura D)
(Figura C)
(Figura E)
1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A)
2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B)
Continuará al ensamble del kit
Ford Fusion 2006-2008
Mercury Milan 2006-2008
(Figura B) (Figura A)
5
Desmontaje del tablero INST-581FD
1. Unclip and remove entire panel surrounding the radio and A/C controls. (Figura A)
2. Quite los (4) tornillos de 9/32” del radio para quitarlo. (Figura B) Continuará al ensamble del kit
Ford Freestyle 2005-2007
Ford Taurus X 2008
(Figura B)
1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A)
2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B)
Continuará al ensamble del kit
(Figura B)
Ford Freestar 2004-2007
Mercury Monterey 2004-2007
Desmontaje del tablero INST-581FD
1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A)
2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B)
Continuará al ensamble del kit
Ford Focus 2005-2007
(Figura B)
1. Abra la consola central y retire los (2) tornillos Phillips, luego desenganche y quite todo el panel que rodea la palanca de velocidades. (Figura A)
2. Quite el panel del tablero que rodea el radio para tener acceso a los tornillos del radio de fábrica. (Figura B)
3. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura C)
Continuará al ensamble del kit
Ford Explorer/Explorer Sport Trac
2006-2008, Mercury Mountaineer
2006-2008
(Figura A) (Figura C) (Figura B) (Figura A)7
1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A)
2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B)
Continuará al ensamble del kit
Ford F-Series Super Duty 2005-2008
Ford Super Duty 2008
Desmontaje del tablero INST-581FD
(Figura A)
1. Desenganche y quite el panel del tomacorriente y el panel de tapa del lado izquierdo y derecho del panel de la moldura del radio. (Figura A)
2. Quite los (2) tornillos de 9/32” expuestos detrás de los dos paneles que quitó anteriormente.
3. Desenganche y quite todo el panel de la moldura del radio, incluyendo el control y las rejillas del aire acondicionado.
4. Quite los (4) tornillos de 9/32” que sujetan el radio.
Continuará al ensamble del kit
Desmontaje del tablero INST-581FD
1. Abra la tapa de la consola central y desenganche y quite el panel de la moldura de la consola central que rodea la palanca de velocidades. (Figura A)
2. Quite los (2) tornillos Phillips del cajón de almacenamiento y luego desenganche y quite el cajón. (Figura B)
3. Desenganche y quite el panel superior e inferior de la moldura central como un mismo ensamble. (Figura C)
4. Quite los (4) tornillos de 9/32” que sujetan el radio. Desconecte y quite el radio.
Continuará al ensamble del kit
Lincoln MKX 2007-2009
(Figura C) (Figura B)
(Figura A)
1. Desenganche y quite el panel que rodea la palanca de velocidades. (Figura A)
2. Quite los (2) tornillos de 9/32” de la parte inferior del panel de la moldura de control del radio/clima. (Figura B)
3. Desenganche y quite todo el panel que rodea el radio, incluyendo los controles del clima. (Figura B)
4. Quite los (4) tornillos de 9/32” que sujetan el radio. Desconecte y quite el radio. Continuará al ensamble del kit
Lincoln Navigator
2007-2008
(Figura B) (Figura A)
9
Ensamble del kit INST-581FD
1. Para 2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/ Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/ Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Super Duty, corte y quite las pestañas traseras de montaje de los soportes Doble DIN.
ISi su vehículo no se incluye en esta lista, vaya al 2.
2. Para 2007 Ford Edge/Expedition, 2006-2007 Explorer, 2006-2007 Fusion, 2007 Mustang y the 2008 Super Duty coloque los espaciadores incluidos en la parte posterior de las pestañas de montaje de la carcasa del radio. (Figura A) Si su vehículo no se incluye en esta lista, vaya al Paso 3.
3. Una los soportes correspondientes
doble DIN a la carcasa del radio. (Figura B y C)
Nota: La muesca de la carcasa debe estar en la parte superior.
4. Deslice el radio doble DIN en el soporte/ensamble del radio y sujete el radio al ensamble utilizando los tornillos suministrados con el radio. (Figura D)
5. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente.
6. Vuelva a armar el tablero al revés de como lo desarmó.
Provisión radio doble DIN
Ensamble del kit INST-581FD
1. Para 2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/ Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/ Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Ford Super Duty, corte y quite las pestañas traseras de montaje de los soportes Doble DIN.
Si su vehículo no se incluye en esta lista, vaya al Paso 2.
2. Para 2007 Ford Edge/Expedition, 2007 Ford Explorer, 2006-2007 Ford Fusion, 2006-2007 Mustang and the 2008 Super Duty coloque los espaciadores incluidos en la parte posterior de las pestañas de montaje de la carcasa del radio. (Figura A)
Si su vehículo no se incluye en esta lista, vaya al Paso 3.
3. Una los soportes correspondientes
doble DIN a la carcasa del radio.
Nota: La muesca de la carcasa debe estar en la parte superior. (Figura B y C)
4. Deslice las unidades de montaje ISO en el ensamble de soporte/carcasa del radio y sujete las unidades al ensamble utilizando los tornillos suministrados con las unidades. (Figura D)
5. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente.
6. Vuelva a armar el tablero al revés de como lo desarmó.
Provisión de radio ISO vertical
11
Ensamble del kit INST-581FD
1. (a) Para Ford Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 coloque los espaciadores incluidos en la parte posterior de las pestañas de montaje de la carcasa del radio. (Figura A)
Nota: Use los tornillos suministrados con este kit para montar la carcasa del radio en los vehículos que requieran los espaciadores.
(b) Para Ford Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007, deslice los soportes incluidos en los lados de la cavidad de las carcasas del radio desde la parte posterior de la carcasa hacia adelante. (Figura B)
Si su vehículo no se incluye en esta lista, vaya al Paso 2.
2. Deslice la reja DIN en la carcasa del radio y sujétela doblando hacia afuera las pestañas de metal. (Figura C)
3. Deslice el radio de mercado secundario en la reja hasta que entre a presión. (Figura D)
4. Ubique el arnés de cableado de fábrica en el tablero. Metra
recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente.
5. Vuelva a armar el tablero al revés de como lo desarmó.
Provisión radio DIN con bolsillo
Ensamble del kit INST-581FD
1. (a) Para Ford Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 y the Super Duty 2008 coloque los espaciadores incluidos en la parte posterior de las pestañas de montaje de la carcasa del radio. (Figura A)
Nota: Use los tornillos suministrados con este kit para montar la carcasa del radio en los vehículos que requieran los espaciadores.
(b) Para Ford Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007, deslice los soportes incluidos en los lados de la cavidad de las carcasas del radio desde la parte posterior de la carcasa hacia adelante. (Figura B)
Si su vehículo no se incluye en esta lista, vaya al Paso 2.
2. Monte los soportes ISO en la unidad central con los tornillos incluidos con la unidad. (Figura C)
3. Deslice la unidad central en la apertura del radio hasta que los ganchos laterales entren a presión. (Figura D)
4. Coloque a presión la placa de la moldura en la carcasa del radio. (Figura D)
5. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente.
6. Vuelva a armar el tablero al revés de como lo desarmó.
Provisión radio ISO con bolsillo
INST-581FD
INST-581FD
INST-581FD
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD
METRA. The World’s best kits.
™1-800-221-0932
metraonline.com
REV
. 9/19/2013 INST
-581FD
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y fabricación inscribiéndose en la escuela de dispositivos electrónicos móviles más reconocida y respetada de nuestra industria. Regístrese en www.installerinstitute.com o llame al 800-354-6782 para obtener más información y avance hacia un futuro mejor.