Evaluation of different treatment techniques in recycled aggregates for use in concrete production
Texto completo
Figure
Documento similar
Many authors found a better fit to their experimental data using the Modified Gompertz Model (Wang and Wan, 2009; Gaur and Suthar, 2017). This study helps to clarify the choice of
To this end, it is of paramount importance to carefully design the concrete mix (i.e. cement and aggregate types, cement/water and cement/aggregate ratios, use of
The next steps in this research line may be (1) to analyze the use of coarse RA in a precast-concrete plant considering, in addition to the aspects covered in this paper,
resulting from the addition of the ultra fine recycled concrete par- ticles from siliceous concrete waste (URSCA) and limestone con- crete waste (URLCA) were studied during the
Electrochemical noise-time series for specimens subjected to Impressed current cathodic protection of reinforced concrete mixtures (OPC-P and OPCFA-P).. Figure 5 shows the EN signal
Based on this initial premise, solvent-free enzymatic glycerolysis of Echium oil was carried out in three different reaction mixtures: (1) high-pressure- homogenized
Therefore, based on results derived from all optimization assays carried out in the present work, optimal conditions for obtaining OsLu mixtures with a high content
In such cases, the designer can still use a concrete syntax pattern to automate the generation of a modelling environment, for which he needs to map meta-model elements to