Surface modification of Al2O3–ZrO2(Y2O3) eutectic oxides by laser melting: processing and wear resistance

In the previous sections we have shown how astronomical alignments and solar hierophanies – with a common interest in the solstices − were substantiated in the

We selected a sample of 27 high redshift quasars (4 ≤ z ≤ 6.4) from the SDSS, which contains the valuable diagnostic UV rest-frame emission lines (e.g., Siivλ1398+Oivλ1402,

Additionally, the strain gauges on the specimens used for the determination of the effect of strain hardening and/or the induction of bending residual stress field by the CCM

Development of electric resistance sintering process for the fabrication of hard metals: Processing, microstructure and mechanical

Fabrication of chromium carbide cermets by electric resistance sintering process: Processing, microstructure and mechanical

The local wear behaviour of Inconel 625 coatings obtained by laser cladding and exposed to isothermal high temperature oxidation at 800 ºC were studied by means of depth

- The drastic reduction of the fluid flow, associated with the better results of surface roughness and roundness errors of the workpiece, and the decrease of the wheel wear caused

Head hardened pearlitic steel grade (P2) has exhibit better wear behaviour than the pearlitic conventional one (P1), because of its higher hardness and yield strength,