Experimental analysis of reinforced concrete beams strengthened with steel bars and epoxy structural adhesive
Texto completo
Documento similar
The balanced reinforcement ratio (ρ b ) of the cantilever beam samples was calculated in (Equation 2). The reinforcement ratio was calculated as 0.01676. On the other hand, the
Once it was verified that the photocatalytic process was working correctly, the next step was to check that the sensors used were able to measure the transmittance level of the
In most cases, simplified assumptions made in the preliminary considerations (pre- emptive yielding of steel, concrete and steel failure in unconfined and confined
In this paper, the acoustic emission method was applied to determine the active presence of xylophages in two different types of test: in situ tests carried out on the wooden beams
Government policy varies between nations and this guidance sets out the need for balanced decision-making about ways of working, and the ongoing safety considerations
Un estudi previ va comparar aquesta capacitat entre diferents rius afectats per entrades d’efluents d’EDARs durant l’època de baix cabal (Martí et al. Els resultats d’aquest
In the previous sections we have shown how astronomical alignments and solar hierophanies – with a common interest in the solstices − were substantiated in the
Experimental results with 17 leather samples in an pre-industrial installation have verified the capabilities of the proposed model for the 18 estimation of optimum non-variable