Analysis and optimization methodology
A tolerance analysis and optimization methodology: the combined use of 3D CAT, a dimensional hierarchization matrix and an optimization algorithm
... Functional analysis consists of identifying the requirements that have to be met between the components, so as to guarantee the assembly of the parts and the functional operation in the ...functional ...
18
16614793
... the optimization methodology of Tank and Hop- field [19] to on-line identification, by designing a Hopfield neural network whose Lyapunov function is made coincident with the prediction error, so that ...
10
A methodology for automated design and implementation of complex analog and digital CMOS integrated circuits applying a genetic algorithm and a CAD tool for multiobjective optimization
... test and characterization of this ASIC will allow designers to determine if adjustments are required to meet design specifications and to verify the result of previous ...hardware and software) to ...
109
Analysis, reliability and optimization of reinforced concrete 2-D structures
... consistent analysis of reinforced concrete (RC) two-dimensional (2-D) structures, namely slab structures subjected to in-plane and out-plane forces, is ...of analysis the well established ...
13
Evolutive Optimization of Wavelets and Shapelets for Bioelectrical Signal Analysis
... SDFB methodology are extended with ROC and statistical analysis, as shown in Table ...TAL/STN/SubNR and ZI present near perfect classification, besides, neural and non neural activity ...
70
OPTIMIZATION OF ALKALINE AND DILUTE ACID PRETREATMENT OF AGAVE BAGASSE BY RESPONSE SURFACE METHODOLOGY
... An analysis of variance (ANOVA) was performed to test the significance of the developed model and the results are presented for AL and DA pretreatment in Tables 3 and 4, ...C, and A 2 , ...
10
Backanalysis methodology based on multiple optimization techniques for geotechnical problems
... a methodology to facilitate the identification of parameters of soil constitutive models by ...measurements and computed values. Different optimization techniques have been used in this study, from ...
357
Hygrothermal effects on CFRP: testing, analysis and structural optimization
... [78–80] and Double Edge Notched Tensile (DEN-T) [16] specimens are being the specimens more frequently used in recent ...CT and OCT have been successfully used for materials with not very high fracture ...a ...
146
Evolutionary-statistical system for uncertainty reduction problems in wildfires
... Statistical Analysis [11] and Parallel Evolutionary Algorithms (PEAs) [12] as optimization ...previous methodology based on Statistical Analysis and High Performance Computing, ...
9
Optimal design of complex systems using successive response surface methodology
... for analysis and optimization in physical experimentation at around 1950, but have been incorporated in the last three decades into computer oriented ...perform, and in consequence, those runs ...
88
Evaluating sustainability and food security of peasant farming systems in Mesoamerican highlands
... resilience and stability in the face of stress, the indicator of the potential incidence of pests in the maize crop acquires great importance in this context (López-Ridaura et ...invasive and common pest at ...
216
TítuloReliability based design and topology optimization of aerospace components and structures
... topology optimization problems, although it is applicable to any optimization problem that can be solved through external ...Topology Optimization (RBTO) is a discipline that combines statistical ...
258
Statistical and optimization methods for spatial data analysis applied to neuroscience
... branching and terminal points of dendritic trees using nearest neighbour distances, particularly, a measure R defined as the ratio between the observed mean nearest neighbour distance of any set of points in a ...
189
A methodology for evaluation and improvement of Six Sigma Programs in Healthcare
... the methodology presented in this article it was possible to establish guidelines to improve the Six Sigma program in the ...foundation and the program, as is indicated by the results; leaders who are ...
32
Analysis and comparison of the results obtained after the application of a gamified methodology and a traditional one in physical education in “bachillerato” (Spanish education for 16 to 18 years old students)
... teacher and the teaching ...gamification methodology in comparison with the traditional methodology, regarding the motivation and the academic performance using the Physical Education subject, ...
18
Cost Optimization Analysis of a Formula SAE vehicle
... better and lighter design to get the lowest possible cost of the ...71.5lbs and this year´s frame weighs 65 ...bodywork and aero pack as ER03’s, limiting the geometry of the ...
129
STRUCTURAL ANALYSIS AND CONTROL OF VIBRATING HOPPERS FOR HARVESTED GRAPES IN A WINE CELLAR: A CASE STUDY
... feet and near the slab ...motor and for simplicity, one hopper only was operating at a ...domain and recorded on a Spectral Dynamics digital acquisition board (Model SigLab ...12 and 18 ...
9
New tools and routines for ecotechnological slope stability analysis
... existing methodology (Mickovski et ...life analysis (3x3-year-old plants, 2x6-year-old ...characterisation and distribution with depth was performed both in situ and in the laboratory ...
122
Sensitivity analysis of Component's Tolerance in Inductively Coupled Power Transfer System
... distance (known as gap) and they are facing each other. Under these circumstances, the efficiency of the system is maximum whereas angular, lateral or incorporated misalignments lead to a reduced efficiency [5] ...
5
Geometric manipulation of NURBS surfaces for computational meshes
... The results presented in Fig.6.2, show an increasing level of undesired waviness in the extremes of the curve as the number of control points growths. This effect can be seen in the curve itself or by the alternate ...
181