• No se han encontrado resultados

atmospheric plasma spraying

Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying

Adhesion assessment of bioactive coatings deposited by atmospheric plasma spraying

... Bioactive coatings are used in the field of medicine as coatings for orthopaedic implants made of bio-inert materials such as stainless steel, chromium/cobalt or titanium alloys with the aim of conferring ...

8

45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes

45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes

... a frit. The frit was milled using two different routes: dry milling followed by sieving to obtain glass particles, and wet milling followed by spray drying to obtain a powder comprising porous agglomerates. All ...

26

Alumina zirconia coatings obtained by suspension plasma spraying from highly concentrated aqueous suspensions

Alumina zirconia coatings obtained by suspension plasma spraying from highly concentrated aqueous suspensions

... Atmospheric plasma spraying (APS) represents one of the most suitable techniques used to obtain TBCs as a consequence of the good mechanical and thermal performance of the coatings obtained as well ...

17

Neural plasma

Neural plasma

... neural plasma, which is tailored for classification tasks involving few observations with a large number of ...Neural plasma learns to adapt its classification confidence by generating artificial training ...

10

DEVELOPMENT OF HA   nAg COMPOSITE COATING FROM GREEN PROCESS FOR HIP APPLICATIONS

DEVELOPMENT OF HA nAg COMPOSITE COATING FROM GREEN PROCESS FOR HIP APPLICATIONS

... by atmospheric plasma spray (APS), and their antibacterial efficiency was evaluated in the following bacterial strains: Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa according to the ...

8

TiN Coatings on Titanium Substrates Using Plasma Assisted Ion Implantation

TiN Coatings on Titanium Substrates Using Plasma Assisted Ion Implantation

... motivated by the fact that at substrate temperatures around 400 ◦ , addition of hydrogen in the range 5-50% results in an increased nitride layer, provided that the partial pressure of nitrogen is maintained [13]. As ...

6

Evaluation of the Mechanical Behaviour of Al2o3 and Al2o3 -Tio2 Coatings Using a Bench Drill

Evaluation of the Mechanical Behaviour of Al2o3 and Al2o3 -Tio2 Coatings Using a Bench Drill

... 8. M. Wang, Y. H. Sohn, L. Shaw, E. Jordan, M. Gell, “Effects of the powder manufacturing method on microstructure and wear performance of plasma sprayed alumina – titania coatings”, Surface & Coatings ...

7

Show all 1258 documents...

Related subjects