• No se han encontrado resultados

Composite Materials

Assessment of virtual design and manufacturing techniques for fibre reinforced composite materials

Assessment of virtual design and manufacturing techniques for fibre reinforced composite materials

... The two-step analytical model has been implemented as a numerical routine in the Liquid Injection Moulding Simulation (LIMS) software [12, 13], a finite element/control volume simulation code with thermal and cure ...

185

Surface modifications of composite materials by atmospheric pressure plasma treatment

Surface modifications of composite materials by atmospheric pressure plasma treatment

... incorporate composite materials in primary structures for cost and weight savings advantages, associated with fuel consumption ...of composite materials may be contaminated with release agents ...

302

←
				
											Volver a los detalles del artículo
									
				MICROSTRUCTURAL CHARACTERIZATION OF FINE WASTE COLLECTOR FOR USE AS REINFORCEMENT IN COMPOSITE MATERIALS

← Volver a los detalles del artículo MICROSTRUCTURAL CHARACTERIZATION OF FINE WASTE COLLECTOR FOR USE AS REINFORCEMENT IN COMPOSITE MATERIALS

... Abstract: A characterization is presented of the waste obtained in collector sleeves of electric furnaces, called Fine Waste Collector (FWCs), during the ferroalloy production process in order to evaluate the ...

5

Effect of the functionalization of silica nanoparticles as a reinforcing agent on dental composite materials

Effect of the functionalization of silica nanoparticles as a reinforcing agent on dental composite materials

... dental composite materials are employed to restore front teeth and to treat small to medium sized lesions in back ...ceramic materials are used. Here, a composite material is a mixture that ...

9

Influences of different air inhibition coatings on monomer release, microhardness, and color stability of two composite materials

Influences of different air inhibition coatings on monomer release, microhardness, and color stability of two composite materials

... In a previous study performed by Polydorou [21], cylin- drical specimens (4.5 mm diameter and 2 mm thickness) created with CX and XTE were light-cured under mylar and, subsequently, stored for 24 h, 7 d, and 28 d in ...

9

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

... A Hysitron TI 950 triboindenter instrument with a dia- mond flat conical tip of 5 mm in diameter was used for the micromechanical tests. Push-in and push-out tests were performed under displacement control at 50 nm/s. For ...

9

Neu Graphene-based Composite Materials

Neu Graphene-based Composite Materials

... To go into detail on the structural role of graphene in our composites, and in order to ascertain how far the cross-linking action of graphene takes place, we envisioned the creation of a graphene-based hydrogel without ...

214

Composite materials based on hybrid mesoporous solids for flow through determination of ultratrace levels of Cd(II)

Composite materials based on hybrid mesoporous solids for flow through determination of ultratrace levels of Cd(II)

... of composite mate- rials for preconcentration purposes that combine the complexing ability of the different components of the filling together with the dynamic conditions imposed by a flow through system holding a ...

10

New Fiber-Metal Hybrid Laminated Material, MALECON

New Fiber-Metal Hybrid Laminated Material, MALECON

... structural materials so far proposed for ship construction have been: high tensile steels, high strength aluminum alloys, and composite ...problems. Composite materials used for shipbuilding ...

8

Melt infiltrated Tungsten-Copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices

Melt infiltrated Tungsten-Copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices

... are materials with inherently different thermomechanical properties and their optimum operating temperature windows do not over- ...W-Cu composite materials are promising candidates regarding the ...

5

Composites reinforced with plant fibers for biomedical applications

Composites reinforced with plant fibers for biomedical applications

... For composite manufacture, composites were prepared at 1, 5, 10 and 25 ...and composite materials reinforced with these ...of composite materials in human body conditions, since it has ...

61

Efficient and Durable ZnO Core Shell Structures for Photocatalytic Applications in Aqueous Media

Efficient and Durable ZnO Core Shell Structures for Photocatalytic Applications in Aqueous Media

... of materials with discordant attributes (P25 powder and ZnO nanorods) to accurately set differences among photocatalyst is not fully recommended, the current analysis could serve to approach a validation about the ...

35

12 realizacic3b3n de carillas de composite

12 realizacic3b3n de carillas de composite

... de composite (opaquer, dentina opaca, dentina y ...de composite, es necesario tener suficiente espacio (1- 1,2 mm) para evitar tener restauraciones ...

14

TOPICS ON COMPOSITE HIGGS

TOPICS ON COMPOSITE HIGGS

... mass. Composite Higgs models aim to solve this problem by postulating an scenario where the Higgs particle is not elementary but instead the bound state of some new unspecified strongly coupled constituents, being ...

115

Estudio de la producción de hidrógeno mediante fotocatálisis heterogénea

Estudio de la producción de hidrógeno mediante fotocatálisis heterogénea

... La Figura 4.29 representa los difractogramas obtenidos para el ZnS, CdS (precipitación) y los composites de CdS-ZnS sintetizados (véase los detalles de la síntesis en el apartado 3.2.6 del capítulo 3). La Figura 4.29a ...

186

Microstructure and mechanical properties of composite cements: reactivity of pozzolanic and hydraulic cementitious materials

Microstructure and mechanical properties of composite cements: reactivity of pozzolanic and hydraulic cementitious materials

... the composite cements phases, granulated blast furnace slag, fly ash, metakaolin, and geothermal silica were used as replacement ...mentioned materials, a water/cementitious materials ratio of ...

13

Desarrollo por AACVD y caracterización de multicapas nanoestructuradas con aplicación en fotocatálisis

Desarrollo por AACVD y caracterización de multicapas nanoestructuradas con aplicación en fotocatálisis

... addition, materials absorptance determined from the total transmittance and re fl ectance spectra revealed a broader absorption interval including visible light, indicating potential uses of these nanostructures on ...

46

Polystyrene modified hybrid materials based on ordered mesoporous silica

Polystyrene modified hybrid materials based on ordered mesoporous silica

... silica materials have been prepared by direct co- condensation of styrylethyltrimethoxysilane (STETMOS) and tetraethylorthosilicate (TEOS) in one-pot ...silica materials have exhibited hexagonal long- range ...

5

The role of land surface schemes in the regional climate model (RegCM) for seasonal scale simulations over Western Himalaya

The role of land surface schemes in the regional climate model (RegCM) for seasonal scale simulations over Western Himalaya

... observations and the RegCM (with BATS and CLM) simulations were computed and are exhibited in Figure 5, which shows that the area-averaged pre- cipitation is underestimated in both LSPS during all of the years ...

14

Microstructure and mechanical properties of composite cements: reactivity of pozzolanic and hydraulic cementitious materials

Microstructure and mechanical properties of composite cements: reactivity of pozzolanic and hydraulic cementitious materials

... pozzolanic materials rich in silica, such as silica fume (SF), fly ash (FA) class F or rice husk ashes; which in addition to provide pozzolanic behavior, accelerate the initial hydration of Portland cement and ...

12

Show all 1239 documents...

Related subjects