• No se han encontrado resultados

Glass fiber

Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates

Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates

... The results of these analyses, together with those of the impact tests (máximum load and energy absorbed), were used to elucídate the role played by glass fiber hybridization on the f[r] ...

18

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

... To obtain the failure energy of GRC samples, the kinetic energy lost by the projectile during the impact event was divided by the thickness of the tested sample and related to the impac[r] ...

12

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

... Estes ensaios foram realizados adoptando a curva de incêndio padrão definida na norma ISO 834 (1999), apresentada na Figura 3c). Nas séries S1 e S3, as vigas de GFRP foram expostas ao [r] ...

16

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

... The mechanical properties (rigidity and Resistance) in the compression and cutting of the GFRP material (more dependent on the matrix) are more affected by the increase of temperature than the traction properties (which ...

16

An alternative methodology to predict aging effects on the mechanical properties of glass fiber reinforced cement (GRC)

An alternative methodology to predict aging effects on the mechanical properties of glass fiber reinforced cement (GRC)

... To study the influence of the accelerated aging process in the mechanical behavior of artificially aged GRC, results obtained in tensile and bending tests performed with four different[r] ...

7

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

Fire Resistance of pultruded profiles of glass fiber reinforced polymer (GFRP) for rehabilitation applications: Experimental, numeric, and analytical study

... Estos ensayos fueron realizados adoptando la curva de incendio patrón definida en la norma ISO 834 (1999), presentada en la Figura 3c). En las series S1 y S3, las vigas de GFRP fueron [r] ...

16

Evaluación de Diferentes Sistemas de Postes: Método de Elementos Finitos

Evaluación de Diferentes Sistemas de Postes: Método de Elementos Finitos

... the glass fiber post model were similar and lower than in the other two ...(quartz fiber posts) and model 4 (titanium ...quartz fiber and titanium post restored teeth are fractured earlier ...

8

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

... The influence of the carbon nanotubes (CNTs) content on the fiber/matrix interfacial shear strength (IFSS) in glass/fiber epoxy composites was measured by means of push-in and push-out tests. Both ...

9

Widely power tunable polarization independent ultrafast mode locked fiber laser using bulk InN as saturable absorber

Widely power tunable polarization independent ultrafast mode locked fiber laser using bulk InN as saturable absorber

... The introduction of the described amplification stage after the mode-locked fiber oscillator (MOPA) leads to additional temporal compression of pulses, which in turn results in an additional enhancement of the ...

11

Silkworm gut fiber of "Bombyx mori" as an implantable and biocompatible light-diffusing fiber

Silkworm gut fiber of "Bombyx mori" as an implantable and biocompatible light-diffusing fiber

... Larvae of the fifth instar of Bombyx mori L. were reared on mulberry leaves. Different B. mori breeds were used in order to compare the properties of different silks (Table S1). The fabrication followed the procedure ...

14

Developing OpenCV applications on Google Glass 2

Developing OpenCV applications on Google Glass 2

... compile and work. So, after inclusion of the library 2.4.9 in the project, the project indeed compiled. But then again, when trying to run in on the Glass, the prompt window shows the option to install OpenCV ...

10

Spectral Fizeau Interferometer applied to dental polymeric resins early shrinkage determination

Spectral Fizeau Interferometer applied to dental polymeric resins early shrinkage determination

... Comparing both curves becomes clear the performance of each formulation. The P60 resin is a commercial blend with unknown formulae, but surely it contains vitreous loads and colorants for aesthetic purposes. Thermal ...

6

t11 mbe metaanalisi diapos fx

t11 mbe metaanalisi diapos fx

... agregado de los resultados de un conjunto de estudios, en especial Ensayos clínicos aleatorizados. • Concepto introducido por Glass,1976[r] ...

34

Operational Modal Analysis on laminated glass beams

Operational Modal Analysis on laminated glass beams

... In this paper, the model proposed by Ross, Kerwin y Urgar (RKU) has been used to estimate the natural frequencies and damping ratios of symmetric laminated glass beams with same thickness for the glass ...

8

Factor de Penalidad de Tags RFID Instalados en Vidrios de Vehículos

Factor de Penalidad de Tags RFID Instalados en Vidrios de Vehículos

... This paper presents a study on the identification of main parameters involved in the on-object gain penalty for RFID Tags when are used over front glass of vehicles. We assess four variables with relevant ...

8

NOMAD spectometer on the ExoMArs trace gas orbiter misión : part 2 - design, manufacturing, and testing of the ultraviolet and visible channel

NOMAD spectometer on the ExoMArs trace gas orbiter misión : part 2 - design, manufacturing, and testing of the ultraviolet and visible channel

... A tube connects the periscope and the occultation telescope to prevent straylight from getting in the telescope. The internal surface is textured with small ridges to reduce straylight and is manufactured from aluminum ...

12

Fabrication of chitosan/bioactive glass composite scaffolds for medical applications

Fabrication of chitosan/bioactive glass composite scaffolds for medical applications

... bioactive glass composites improves the mechanical and biological ...bioactive glass particles provides biomineralization and it increases the stiffness of polymer material without decrease the mechanical ...

10

Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials

Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials

... volume. If the beam is reinforced by its lower face, its capacity to absorb tensile stresses will increase, and therefore, an increase in its carrying capacity is likely to be produced[r] ...

9

Distributed photothermal spectroscopy in microstructured optical fibers: towards high resolution mapping of gas presence over long distances

Distributed photothermal spectroscopy in microstructured optical fibers: towards high resolution mapping of gas presence over long distances

... the fiber core, producing a small but detectable change in its ...the fiber with high spatial ...the fiber homogeneity, and possibly calibration procedures should be put forward to turn this concept ...

18

Photonic liquid crystal fiber intermodal interferometer

Photonic liquid crystal fiber intermodal interferometer

... In this work, we present a novel interferometer based on liquid crystal and photonic crystal fiber technology. The objective of this project is the development of a tunable (switchable) modal (Mach- Zehnder) ...

5

Show all 428 documents...

Related subjects