Diseño del control de un robot móvil de NationalInstruments con el neurotransmisor Emotiv EPOC es un proyecto de investigación desarrollado y presentado en la universidad Metropolia University of Applied Sciences (UAS) de Helsinki. Llevado a cabo por un equipo formado por 3 alumnos y el profesor que lo guio, tiene como principal objetivo controlar y dirigir de forma remota un robot móvil de NationalInstruments (NI) con el neurotransmisor Emotiv EPOC, un casco que es capaz de tratar y procesar señales encefalográficas (EEG) de alta resolución por medio de 14 electrodos que se disponen alrededor de la cabeza y un sensor giroscópico. El robot fue donado a esta universidad por la empresa NationalInstruments con fines educativos, y en la misma universidad se le añadieron componentes extras tales como un adaptador para la placa de comunicaciones mbed y para el módulo XBee, y efectos de luces LED y sonido.
The article reveals the textural, timbre-dynamic, harmonic, performing and other musical means of imitating the sound of nationalinstruments in piano music. Based on the analysis of literature and works by M. Mussorgsky, S. Rachmaninov, F. Liszt, Wang Jiangzhong, Zhu Wanhua, A. Rudenko, R. Kasimov and other composers, summarizing the performing and pedagogical experience of studying piano works shows the means of implementing various instruments to groups of idiophones, membranophones, chordophones and aerophones according to the instrumental classification of Hornbostel-Sachs. The article shows that onomatopoeia is based not only on the sound image of the primary source instrument, but also on recreating the playing techniques of playing it. At the same time, the traditions of academic art, the achievements of European pianism and the sound capabilities of the piano are actualized. Imitation of the sound of the bell, one of the idiophones, occupies an important place in foreign and domestic music. In the works of Russian composers, various types of Orthodox bells ring out, such as Blagovest, Perebor, Perezvon, and Trezvon. In the works of Chinese composers, the sounds of ancient bianzhong ceremonial bells are displayed. The imitation of a bell is based on the reproduction of its timbre-acoustic characteristics, rich in overtones of a booming sound, long and smoothly dying out, accompanied by other harmonies or figurations, pedalization of the piano. The imitation of string-stringed chordophones is notable for its expressiveness, melodic expressiveness, improvisation, and rich ornamentation. Piano playback of plucked chordophones of the zither type is based on the use of arpeggiated figures, pizzicato, vibrato, glissando, etc. wind themes are distinguished by an abundance of melisms (trillare, acciaccatura, glissando, repetitio).
The aim of this paper is to obtain a system to simulate and optimize variables and parameters involved in the production of hydrogen in an electrolyzer through overheated water steam. The study is based on impedance spectroscopy. It allows to understand the physical phenomena because of the electrolysis process by using mathematical models. The hydrogen production process is represented by an electrical circuit for optimization. This circuit establishes a direct relationship between the current generated in the circuit and the hydrogen flow rate using Faraday's law. The mathematical model is obtained from the equivalent circuit, and it allows a connection of the variables that affect the process, such as temperature, area, voltage, frequency, etc. The simulation was performed to design electrolysis equipment to ensure an efficient and economical production of hydrogen, getting and storing relevant information for further analysis by the NationalInstruments LabVIEW.
Este documento es el resultado de la implementación de una estación de monitoreo de la actividad pluviométrica, medida en tiempo real, en la ciudad de Florencia (Caquetá). La estación incluye un sensor de pluviometría y un sistema de adquisición de datos usando instrumentación virtual, a través de la tarjeta DAQ NI-6221 de NationalInstruments como hardware y el software de programación gráfica LabVIEW 7.1. La estación cuenta con un sistema fotovoltaico, que suministra la potencia eléctrica requerida en su funcionamiento, con una autonomía de dos (2) días. La estación fue puesta en operación en Noviembre de 2006 a diciembre de 2010, en los predios de la Universidad de la Amazonia. Como resultados se tiene la captura de información cada dos minutos de las variables censadas, durante las 24 horas del día, los 365 días del año; Los datos de cada día son almacenados en un archivo *.xls, nombrado con la fecha del día del registro y pueden ser vistos y analizados a través de una hoja electrónica.
Especificaciones del amplificador de ganancia programable de las tarjetas de adquisición de datos National Instruments NI-6013, NI-6014:. Observar la diferencia en la impedancia de entr[r]
In this example we will place an addition SubVI in our diagram. The first step is to Right Click in an open area of the block diagram to launch the palette browser. Note: In our labs [r]
Una vez realizada dicha operación el control PID Difuso responde con mejor cualidades de los en comparación a los otros controladores, e incluso eso se ve en la simulación realizada dond[r]
Una de las particularidades de LabVIEW es que el mismo está enfocado a la programación de instrumentación, es decir, a la recolección, análisis, monitoreo y visualización de mediciones de datos. Históricamente científicos, profesionales de ingeniería y otros han estado limitados a la compra o construcción de hardware instrumental para realizar mediciones de datos, LabVIEW presenta la opción de crear instrumentos de software personalizados y enfocados a las necesidades de la aplicación. Es por esta razón que los programas de LabVIEW son llamados VIs (Virtual Instruments).
En la siguiente sección de explicación del FC, se define y describe el FC. Se presenta un circuito electró- nico (Coughlin y Driscoll, 1982; Counts et al., 1982; Na- tional Semiconductor, 1984; Kitchin y Counts, 1983; Stout y Kaufman, 1973; Analog Devices, 1983, 1985) para obtenerlo y se describe el cálculo de este factor por medio de los programas DADISP (2002) y Lab- VIEW (NationalInstruments, 2002); se validan y co- rroboran los resultados de los factores mediante un estudio comparativo. En la sección aplicaciones se propone la aplicación de los procedimientos valida- dos para obtener y calcular el FC y su tendencia de diversas señales para detectar: el nacimiento de ave- rías mecánicas, el grado de caosidad en circuitos caóti- cos, la detección de deficiencias básicas o estertores del sistema respiratorio y el grado de distorsión de la corriente eléctrica impuesta por cargas no-lineales. En la sección de análisis se examinan y reportan los resul- tados más relevantes, se plantean las recomendacio- nes para la aplicación eficiente y novedosa de este procedimiento de análisis temporal de señales en el control de caos, el monitoreo continuo y en tiempo
La plataforma NationalInstruments tiene relación con las aplicaciones desarrolladas en este trabajo, con base en el diseño de una interacción hombre máquina sobre la adquisición de la información de un proceso o variables que intervienen en el desarrollo, se busca presentar una solución a bajo costo, es importante mencionar que la filosofía de programación en FlexiSoft, es simplificar la automatización en aplicaciones HMI y PLC con equipos propios de la marca o de otros fabricantes, una de las ventajas principales del software es libre de uso licencia de activación, puesto que es un software de bajo nivel cuenta con las herramientas suficientes para realizar una interfaz robusta y versátil, además comparte como cualquier entorno de desarrollo diferentes tipos de recursos para la depuración o construcción de un programa secuencial.
Todo o sistema foi automatizado utilizando-se um aplicativo de desenvolvimento próprio, desenvolvido em LabVIEW ® 7.1 (National Instruments, USA). Foram calibrados do[r]
En el proyecto se realiza el diseño de un control de ascensor y adquisición de datos bajo la plataforma LabVIEW. El objetivo principal es crear un prototipo de un ascensor para el laboratorio de redes eléctricas en el cual los estudiantes podrán visualizar las aplicaciones del Software LabVIEW en sistemas existentes. Podemos controlar y verificar en tiempo real por múltiples medios de los eventos que suceden en el ascensor. El software LabVIEW pertenece a la empresa Estado Unidense NationalInstruments, la cual también provee las tarjetas para la adquisición de datos Analógicos, Digitales, etc., en este proyecto también hemos seleccionado el hardware adecuado para lograr nuestros objetivos. Con este proyecto intentamos facilitar la imaginación de los estudiantes para crear aplicaciones de modernización de equipos electromecánicos para mejorar su eficiencia con las nuevas herramientas existentes.
Si bien en el presente proyecto sería difícil agregar más utilidades al programa por la capacidad de memoria, existen plataformas similares especialmente de National Instruments con mayo[r]
• MyDAQ es una tarjeta electrónica de reducidas dimensiones con comunicación USB que puede ser utilizada como un laboratorio real portátil, diseñada para la experimentación práctica en cualquier entorno. Una sola tarjeta proporciona ocho Instrumentos Virtuales de Laboratorio. Sus ventajas fundamentales de cara a la enseñanza, son su fácil manejo, sus reducidas dimensiones y su bajo coste. MyDAQ (NationalInstruments, 2014) es usado para mejorar el aprendizaje de los estudiantes en circuitos y electrónica, medidas mecánicas, procesamiento de señales y más.
distribution and population size are subject to regulation. In 2016 this list was revised and updated according to data of invasive species monitoring. Currently it includes 9 plant species and 13 animal species. Data on invasive alien species are stored and maintained in Cadasters of Flora and Fauna of the Republic of Belarus. State of invasive plant and animal species is monitored in Belarus within the frameworks of the National environment monitoring system; recommendations on prevention and minimization of damage from their distribution are being developed. A computer data bank has been created and works are carried out on inventory and mapping of habitats of invasive species. The Centre on Invasive Animal Species was established in 2007 by the Decisions of the Presidium of the National Academy of Sciences of Belarus. It is
The planning of national targets offers, for each of them, the possibility of indicating the national priority for that area of activity as well as the level of resourcing available, or that could be made available during the triennium, for its implementation. In addition, there are specific boxes to indicate the National T argets for implementation by 2018 and the planned national activities that are designed to deliver these targets. Ramsar Strategic Plan 2016-2024 shows the synergies between CBD Aichi Biodiversity T argets and Ramsar T argets. Therefore, the NRF provide an opportunity that Contracting Parties indicate as appropriate how the actions they undertake for the implementation of the Ramsar Convention contribute to achievement of the Aichi T argets according to paragraph 51 of Resolution XII.3.
The planning of national targets offers, for each of them, the possibility of indicating the national priority for that area of activity as well as the level of resourcing available, or that could be made available during the triennium, for its implementation. In addition, there are specific boxes to indicate the National T argets for implementation by 2018 and the planned national activities that are designed to deliver these targets. Ramsar Strategic Plan 2016-2024 shows the synergies between CBD Aichi Biodiversity T argets and Ramsar T argets. Therefore, the NRF provide an opportunity that Contracting Parties indicate as appropriate how the actions they undertake for the implementation of the Ramsar Convention contribute to achievement of the Aichi T argets according to paragraph 51 of Resolution XII.3.
In the period 2003-2009 Danube River Basin Directorate has conducted a project for the recovery of wetlands and reduction of pollutants in the Danube river basin. The project was financed by the Global Environment Fund (GEF) and World Bank Group (WBG) for the Danube wetlands in Bulgarian part of the Danube river - Persina and Calimock. The main aim of this project was to help Bulgaria to fulfil the national and international commitments for reduction of nutrient loads and to preserve the biological diversity of the Danube river and the Black Sea by restoring the wetlands with improved management and sustainable use of water resources. In the four River Basin Management Plans (RBMP) there are concrete measures and relevant actions
7. Note that, for the purposes of this national reporting to the Ramsar Convention, the scope of the term “wetland” is that of the Convention text, i.e. all inland wetlands (including lakes and rivers), all nearshore coastal wetlands (including tidal marshes, mangroves and coral reefs) and human-made wetlands (e.g. rice paddy and reservoirs), even if a national definition of “wetland” may differ from that adopted by the
The planning of national targets offers, for each of them, the possibility of indicating the national priority for that area of activity as well as the level of resourcing available, or that could be made available during the triennium, for its implementation. In addition, there are specific boxes to indicate the National T argets for implementation by 2018 and the planned national activities that are designed to deliver these targets. Ramsar Strategic Plan 2016-2024 shows the synergies between CBD Aichi Biodiversity T argets and Ramsar T argets. Therefore, the NRF provide an opportunity that Contracting Parties indicate as appropriate how the actions they undertake for the implementation of the Ramsar Convention contribute to achievement of the Aichi T argets according to paragraph 51 of Resolution XII.3.