This is a fully-automated system using the technology from Zagster. 1. Bike Share System
The Tech-on-Bike uses technology from Zagster including specially designed bikes with electronic key boxes installed over the rear tire. As with the bike corral, the system is
characterized by the answers to the essential aspects that follow. To learn how this system works for users, see section 2 and how the bike share is maintained, see section 7.
2. Bike Sign Out / Log Method
This is a fully-automated system that does not require a bike share location be at a building staffed with an employee. The technology required for sign-out is the key box on the bike itself and an internet connection or smart phone application (app).
Once a user has enrolled in the program, he or she uses a computer or the app to request a PIN for a specific bike key box which the user enters to open that key box. The user then takes the key and closes the key box and is free to ride the bike to any location before returning the bike to the same rack location in an allotted amount of time. Upon check-in, the user uses the app to get a new PIN to open the return the key to the box.
Every time a user requests a PIN, the date, time, and user information are recorded via the server. This provides real-time, automatic data acquisition.
3. Bike Locations (Number and Placement)
These locations are at areas of a high concentration of potential users. From left to right in xxx below are the locations on the Quad, an area with close access to four of five freshman
residence halls and two upperclassman residence halls as well as people using the Quad or eating in the dining hall. The library is on the academic portion of campus which sees
thousands of students and employees passing through every day. The next is at Faraday Hall, home to more than 250 students. The last location is at Gateway Park, with over 40 faculty members as well as staff and many graduate students.
4. Bike Locks
A U-lock is provided with the bikes from Zagster. 5. Bike Type
The Breezer Uptown will be used. 6. Number of Bikes
Minimum: 16 Maximum: 31
7. Bike Share Operator(s)
The day to day operations and marketing of the bike share will be run by the WPI Student Green Team. With this tech-on-bike system, all maintenance is provided by Zagster contractors.
Additionally, a faculty and / or staff member serves in an advisory role for the bike share and oversees its operation. While the Green Team members will run the day to day operations, it is important that a supervisor ensures tasks weekly or monthly tasks are
accomplished. Additionally, this advisor would serve to maintain continuity of leadership during Green Team officer transitions.
Operations Plan
Market and promote bike share. 8. Bike Share Users
The bike share is open to all undergraduate and graduate students, faculty and staff. 9. Checkout Format
This system uses the Ride-and-Return checkout format. A user returns a bike to the location, but not necessarily the exact rack from which it was taken. A bike is signed back in when the bike is locked on location and the key is returned to the key box.
10. Checkout time
The bikes can be signed out for up to 8 hours.
To instill accountability to the users for keeping the bikes safe and returned on time, a fee system is put in place. A way to charge student accounts for late or damaged bikes must be set up.
1st Late: Emailed warning
o The late fee should be based on the number of hours returned late. If a bike is not returned by 24 hours, an additional charge may be made. If the bike is not returned at all, the user is charged for the full cost of replacing the bike.
Users are not responsible wear and tear of the bikes, but any significant damage beyond this expected amount is subject for charge.
11. Cost to User
There should be no cost to users in an effort to increase sustainable transportation on the WPI campus. The benefit to the university is the decreased single-occupancy vehicle use. In
addition, in order to build up a base of supporters it is important for it to be free to join the bike share. If in the future it is determined a base of users has been established, the possibility of charging a membership fee can be evaluated.
12. Workshop Space and Maintenance
A space to maintain the bikes is required. Though basic maintenance can be done on location, a workshop is required for more in depth maintenance. If a small space is available in building on campus, it would be closer to the bike share location. If not, our contact in the Department of Facilities envisions a space being set aside for a bike storage and maintenance area.
13. Winter Storage Space
The bikes will be stored in a protected space during the winter to protect the bikes from the winter weather. To keep logistics simple, this space is the same as the workshop and
maintenance space. There must be room to store or hang the 16 bikes. 14. User Sign-Up, Liability, & Education
Create a website for the bike share to allow users to sign up online. The website should include educational videos followed by a quiz to check understanding. The purpose is to ensure users know how to properly and safely use a bike such as how to use the gears, brakes, seat
adjustment, etc. In addition, it should provide information about basic skills to personally check if bike is safe to ride such if the brakes work and all the joints are tight. Finally, the user should fill out and electronically sign a liability form created by the university. In this, the user agrees to be liable for a damaged or lost bike and that the school is not liable for any injury sustained while using the bike share.