Activitat de síntesi

Minex5.2

Minex5.2 – – String > String > BaseMap BaseMap

Minex5.2

Minex5.2 – – String > Annotate String > Annotate

Minex5.2

Minex5.2 – – String > Connect and Disconnect String > Connect and Disconnect

oConnect allows two strings of the same data type to be joined into one common string oConnect Continuous allows you to connect multiple strings until the mode is switched off

Notes: The resultant string will have the same parameters as that of the first string you use in the Connect process.

oDisconnect allows you to disconnects all points from the string oSplit allows you to split a string at the marked point

oSplit Continuous allows you to split multiple strings until the mode is switched off

oBreak allows you to break a string at the marked point, leaving the two strings with a common point

Minex5.2

Minex5.2 – – String > Generate String > Generate

Minex5.2

Minex5.2 – – String > Generate > Surface Intercept String > Generate > Surface Intercept

 Grid to Grid Intercept function allows you to create a string where two grids intersect

 Triangle to Grid Intercept function allows you to create a string where a triangle and a grid intersect

 Triangle to Triangle Intercept function allows you to create a string where two triangles intersect

Minex5.2

Minex5.2 – – String > Generate > Triangle Grade String String > Generate > Triangle Grade String

 Triangle Grade String dialog box allows you to generate a string at a nominated Gradient

The system will then attempt to generate a string intersecting the selected triangle surface at the nominated Gradient. An error will be displayed if there is no solution available.

Minex5.2

Minex5.2 – – String > Alter String > Alter

Minex5.2

Minex5.2 – – String > Move String > Move

Minex5.2

Minex5.2 – – String > Fit To String > Fit To

o String Fit to Grid function allows you to change the elevation points on a string to match the elevation of a grid. The X and Y values of the points are unchanged, but the Z value is changed based on the selected grid

o String Fit to Triangle function allows you to change the elevation points on a string to match the elevation of a triangle. The X and Y values of the points are unchanged, but the Z value is changed based on the selected triangle

Minex5.2

Minex5.2 – – String > Export > Talpac Format String > Export > Talpac Format

String Export Talpac Format function allows you to export a string (e.g. road centre line) to Talpac file format

Minex5.2

Minex5.2 – – String > Segment String > Segment

Minex5.2

Minex5.2 – – String > Segment String > Segment

 Interp Points at Spacing Opens a dialog box to prompt for the value to use to set spacing between points

 Insert Points Opens a dialog box to prompt for the number of points to insert inside the current string segment

 Insert Point from Projection Allows you to insert a point at the intersection between the projection of the current string segment and the digitized string

 Insert Mid-Point Allows you to insert a point in the middle of the current string segment

 Insert Online Allows you to insert points at the digitized online positions. Right click to end digitize mode.

 Insert Points Offline Allows you to insert points at the digitized offline positions. Right click to end digitize mode.

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

 String Area Operations dialog groups together some common String Operations so that they can be performed on multiple Strings that fall within a nominated region. Alternatively, the operation can be performed on all displayed or nominated data.

Area Parameters

oInside Polygon Select this to use a Polygon to limit the Area Operation to Strings only within the polygon oOutside Polygon Select this to use a Polygon to limit the Area Operation to Strings only outside the polygon oTotal Area Select this to perform the operation on all visible and selected Strings

oDigitize Digitize a polygon in the Graphics Window on-the-fly (the polygon is only created temporarily) oPick Pick a polygon from the Graphics Window

oList Pick a polygon from a List presented from the current opened Geometry File(s) Data Selection

oAll Data oStructure oBaseMap oMasks

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

 Copy & Delete

oSelect Action lets you choose between Copy or Delete of data.

oCopy To allows you to specify the resulting Group, Map, Ident and Class of the copied Strings, if Copy is selected as the action.

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

 XYZ Offset allows you to shift all the selected Strings to new positions, relative to their original position.

You can either specify the actual XYZ offset values to be used (+ or -) or digitize the XY offset on-screen.

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

Project allows you to project all Strings in a number of different ways. This function is similar to the Projecting and Offsetting Strings operation.

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

Fit will fit each point of the selected Strings to the given Grid or Triangle.

The Elevation of each String Point fitted to the Surface will take on the Z of the Surface being fitted to.

Add points at surface intersection, if selected will create new points where each String segment intersects the nominated surface facets

Minex5.2

Minex5.2 – – String > Area Operation String > Area Operation

String Properties lets you allocate common properties to all the selected Strings.

Minex5.2

Minex5.2 – – String > Report String > Report

 Report Creates a report that lists the XYZ values of the string. The report is displayed in the Minex Report window.

 Detailed Report Creates a detailed report that lists all the information about the string. The report is displayed in the Minex Report window.

 Report Plan Area Reports the Polygon area and centroid for the string. The report is displayed in the Minex Report window.

Minex5.2

Minex5.2 – – String > Geometry Tools String > Geometry Tools

Minex5.2

Minex5.2 – – String > Geometry Tools String > Geometry Tools

 Delete Geometry Data The Delete Geometry dialog box allows you to delete selected data types (such as Maps and Idents) out of the geometry file.

Once you have selected the data you wish to delete, press the OK button to update the Geometry file.

 Delete Viewed Geometry Data Immediately deletes the geometry data currently displayed.

 Copy/Rename Geometry Data This dialog is used to make bulk changes to geometry data

 Copy Multiple Idents This dialog is used to make bulk changes to geometry data

 Geometry Data Cleanup This function allows you to validate MAP data in the geometry file for various conditions

 Transform Geometry Data This dialog lets the user apply bulk transformations to existing Geometry data

 Summary Geometry Report This option will generate a summary report of the contents of the Geometry file. The report is generated in the Minex Output Window.

 Detailed Geometry Report This opens the Geometry Data Report - Detailed dialog allowing you to specify what portion of the Geometry file you wish to include in the report. This report is generated in the Minex Output Window.

TSX:GCM

October 2008

Copyright 2007, Gemcom Software International Inc.

Gemcom Software International Inc.

In document Bandolerisme i literatura: (página 82-102)