CAPÍTULO 5. Unidad espacial de análisis: el Asentamiento “Sepe Tiaraju”
5.1. Caracterización del Medio Físico y Biótico
5.1.7. Análisis temporal del uso y ocupación del suelo
Prerequisites Before the operation, it is required to confirm:
� The number of exchange to be configured is known.
� The MML Terminal window is opened.
Context By default, some data are created in the OMM system, including Country Code (CC), Mobile Country Code (MCC), Mobile Network Code (MNC), National Destination Code (NDC), and supported types. Modify the mobile data of local exchange as required.
Steps 1. If no exchange is specified, execute command SET on the MML Terminal window or select a NE from the system tree to spec-ify the exchange to be configured.
Example: Select the MSCS exchange with ID as 11 from the system tree.
SET:NEID=11;
2. Create local office mobile data as required. The command is ADD MSCCFG.
Table 35 describes the main parameters in the ADD MSCCFG command.
TABLE35 PARAMETERS IN THE ADD MSCCFG COMMAND
Parameter Name
Parameter
Description Instruction
MSC MSC number
It is a mandatory parameter, with a length ranging from 1 to 16 digits. MSC GT number is uniformly planned by the carrier for distinguishing different MSCs
VLR VLR number
It is a mandatory parameter, with a length ranging from 0 to 16 digits. VLR GT number is uniformly planned by the carrier for distinguishing different VLRs
CC Country Code
(CC)
It is an optional parameter, with a length ranging from 0 to 4 digits. Type it according to the actual conditions. The country code of China is 86
NDC National
destination code
It is an optional parameter, with a length ranging from 0 to 4 digits. Type it according to the
Parameter Name
Parameter
Description Instruction
MCC Mobile country code
It is an optional parameter, with a length ranging from 0 to 3 digits. Type it according to the actual conditions. The country code of China is 460.
MNC Mobile network code
It is an optional parameter, with a length ranging from 0 to 3 digits. Type it according to the actual conditions.
OFCTYPE Local exchange type
It is an optional parameter, including NONE (select none), LV1 (first connection center), LV2 (second connection center), and EO (mobile peer office).
Select it according to the actual conditions
SNLEN Mobile subscriber number length
It is an optional parameter. Type an integer ranging from 3 to 4, with a default of 3
PREINT International toll prefix
It is an optional parameter, with a length ranging from 0 to 4 digits, with a default of 00
PRENAT National toll prefix
It is an optional parameter, with a length ranging from 0 to 4 digits, with a default of 0
RC Area code It is an optional parameter. Do not add 0 ahead of an area code TAG Miscellaneous
tag It is an optional parameter.
NSYIND
NAS
synchronization indicator
It is an optional parameter. It ranges from 0 to 255, with a default of 255 (0xff indicates invalidity)
It is an optional parameter, with a default of SPEECH
RNCRESET Times of RNC reset
It is an optional parameter. The parameter are integers ranging from 1 to 10, with a default of 3
SUPCAPA Capabilities Of local office
It is an optional parameter, indicating the supplemental functions supported by the exchange. Options include NONE and IP
Parameter options: IP and SSP
It is an optional parameter, indicating the connection mode between the local MSCS and SCP when the IP playback is conducted
IPDLGVER
CAMEL version between IP and SCP, including options:
CAMEL2 , CAMEL3 and CAMEL4
It is an optional parameter.
Generally, it is configured as 3
SELFCIC
Local CIC (carrier identification code)
It is an optional parameter. It ranges from 0 to 6, with a default of 0
It is an optional parameter. It ranges from 0 to 6, with a default of 0
PLMNLIST Binding carrier PLMN
It is an optional parameter.
When the subscriber location update succeeds, MSCS notifies the PLMN number (a peer of MS) through Equivalent PLMNs of the LOCATION UPDATING ACCEPT message. PLMNLIST can have up to five groups of Equivalent PLMNs.
OPERATOR Carrier of local office
It is an optional parameter. The carrier of local office does not need to be configured in the background system, and it is generated according to MCC and MNC during the transmission.
CODETYPE
Default codec type of local office
It is an optional parameter, including options: G711A64 (ITUT_G711A_64) and G711U64 (ITUT_G711U_64)
SUPPCAL-LEDPBRT
PRBT support mode of called use
It is an optional parameter. The parameter indicates whether the exchange supports personalized ring back tone (PRBT) and the mode of the support. Options include NO, CALLER1 and CALLER2.
SUPPCAL-LINGPBRT
PRBT support mode of calling use, including options: NO and YES
It is an optional parameter, with a default of NO
Parameter Name
Parameter
Description Instruction
PBRTPFX Voice service PRBT prefix
It is an optional parameter, indicating the calling prefix of the PRBT defined by operator and mainly used for connection with the PRBT center.
PLAY-CWTONE
Whether to play the warning tone during the call waiting, including options: NO and YES
It is an optional parameter, with a default of NO
IPPFX IP pre-embeded
prefix It is an optional parameter
OMCPRIOR
Traffic control static data priority, including options: NO and YES
It is an optional parameter, with a default of NO
LOADTYPE
It is an optional parameter, with a default of NEXTLV
MISSCALL MissCall short message center
It is an optional parameter, indicating the number of MissCall short message center. It is made up of numeric characters with 0~16 digits
It is an optional parameter. It is made up of numeric characters with 0~16 digits
RCSKEY Remote Control Key(IGW)
It is an optional parameter. It ranges from 0 to 255, with a default of 255
RCMINLEN Minimum length of code(IGW)
It is an optional parameter. It ranges from 1 to 32, with a default of 1
RCMAXLEN Maximum length of code(IGW)
It ranges from 1 to 32, with a default of 20
RCTAG
Whether need to press '#' to end, including option NO and YES
It is an optional parameter, with a default of NO
CNID CNID
It is an optional parameter. It ranges from 0 to 4095, with a default of 0
LICOFCID Monitor Center Office
It is an optional parameter. It ranges from 0 to 3000, with a default of 0
Parameter Name
Parameter
Description Instruction
NAME Alias
It is an optional parameter, which is used to describe the local mobile date of MSCS for easy recognition
OSBDAS OSB analysis selector
It is an optional parameter, indicating the calling prefix of the multimedia PRBT defined by operator and mainly used for connection with the multimedia PRBT center. It is made up of numeric characters with 0~2000 digits
It is an optional parameter, with a default of NO
USSDPLC
It is an optional parameter, with a default of MSISDN_USSDC
IFDFTZC
It is an optional parameter, with a default of DISABLE
DFTZC Default ZoneCode
It is an optional parameter. It is made up of characters with 0~4 digits, with a default of FFFF
RDIPREFIX RDI prefix
It is an optional parameter. It is made up of characters with 0~16 digits
USRTYPE-JUDGE
Judgement of user type, including options:
NUMBER and ROAMTYPE
It is an optional parameter, with a default of NUMBER
The parameter is used to configure the rate of TUP/ISUP/BICC releasing successful call relevant to unaccessible DPC, and it is only effective for the inter-office signaling of TUP/ ISUP/BICC. It is 0 or within a range of 40~500.
Parameter Name
Parameter
Description Instruction
are not 0, if the office direction recovery is not considered (the call of the office direction is immediately released after the office direction signaling is recovered), the smaller the value is, the slower the release speed is. Thus the subscriber gets a better experience, but the time difference in the calling record and called record becomes larger.
For the end office, one is advised to set the value as 100, and the value of the end office should not exceed 200; For the tandem office, the default is 310
Example: Configure the mobile data of local exchange with the following requirements.
� MSC number: 8613903023
� VLR number: 8613903023
� Country code: 86
� Mobile country code: 460
� Mobile network code: 00
� Local office type: Mobile peer office
� Miscellaneous tag: "SMS MT"&"SMS MO"&"LOCCIC_NOO UT"
� Other parameters: default.
The specific command is as follows.
ADD MSCCFG:MSC="8613903023",VLR="8613903023",C C="86",NDC="139",MCC="460",MNC="00",OFCTYPE="EO
",SNLEN=3,PREINT="00",RC="25",TAG="SMS MT"&"SMS MO"&"LOCCIC_NOOUT",NSYIND=255,SOURCE=SPEECH,R NCRESET=3,SUPCAPA="NONE",SELFCIC="0",DEFCIC="0
",DEFNAEA=65535,CODETYPE=G711A64,SUPPCALLEDPB RT=NO,SUPPCALLINGPBRT=NO,PLAYCWTONE=NO,OMC PRIOR=NO,LOADTYPE=NEXTLV,RCSKEY=255,RCMINLEN
=1,RCMAXLEN=20,RCTAG=NO,CNID=0,LICOFCID=0,OS BDAS=0,ROAMPLC=NO,USSDPLC=MSISDN_USSDC,IFDFT ZC=DISABLE,DFTZC="FFFF",USRTYPEJUDGE=NUMBER,RE LCALLNUM=0,BICCCS=OFF,FAXDELAY=5,IGNLANOTALL OW=NO,CRD=NO,CMPBSCCODEC=FALSE;
END OF STEPS