4. Marco metodol´ ogico 30
5.2. Descripci´ on del proceso
5.2.2. An´ alisis
HOW TO ORDER
C1630
OR (C1589 WITHOUT SHOT GUARDS) TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
3 C1630 33” 120” 3” B1050-1 RR B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
ROLLER Standard - 1.90” Dia. x .148# (9 ga.) steel.
FRAME
Standard - 4” x 2” x .179” formed steel channel (standard paint).
Option - 4” at 5.4# structural steel channel (H rail) with rollers low only.
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 60” (1” increments).
SECTION LENGTH Standard - 120”.
Option - 60”.
ROLLER CENTERS Option - 3”, 4”, 6”, 8” or 12”.
BEARINGS Standard - B1050-1 (7/16” hex bore).
Option - B1051-2 (Grease packed)
AXLE Standard - 5/16” hex steel. Spring loaded (SL) construction 9” thru 39” W with rollers high or 12” thru 39” with rollers low.
Ring Ring (RR) construction for all others.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched for C681/C684 (3000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 218
5’-0” 1050
Level Storage
10’-0” 262
5’-0” 1050
channel)
HOW TO ORDER
C1591
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
3 C1591 21” 120” 4” B1060-1 SL B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
ROLLER Standard - 2.50” Dia. x .120” (11 ga.) steel.
FRAME Standard - 4 x 2” x .179” formed steel channel (standard paint).
Option - 4” at 5.4# structural steel chanel (H rail) with rollers low.
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 72” (1” increments).
SECTION LENGTH Standard - 120”
Option - 60”.
ROLLER CENTERS Option - 3”, 4”, 6”, 8” or 12”.
BEARINGS Standard - B1060-1 (11/16” hex bore).
Option - B1064-2, B1062-2.
AXLE Standard - 11/16” hex steel. Spring loaded (SL) construction 9” thru 60” W with rollers high or low w/B1060-1 & B1064-2 bearings.
Ring Ring (RR) construction for all others.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched for C681/C684 (3000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 218
5’-0” 1050
Level Storage
10’-0” 262
5’-0” 1050
channel)
HOW TO ORDER
C1593
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
3 C1593 21” 120” 4” B1060-1 SL B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
ROLLER Standard - 2.56” Dia. x .180” (7 ga.) steel.
FRAME Standard - 4” x 2” x .179” formed steel channel (standard paint).
Option - 4” at 5.4# structural steel channel (H rail) with rollers low.
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 72” (1” increments).
SECTION LENGTH Standard - 120”.
Option - 60”.
ROLLER CENTERS Option 3”, 4”, 6”, 8” or 12”.
BEARINGS Standard - B1060-1 (11/16” hex bore).
Option - B1064-2, B1062-2.
AXLE Standard - 11/16” hex steel. Spring loaded (SL) construction 15” and wider W with rollers high or low w/B1060-1 and B1064-2 bearings.
Ring Ring (RR) construction for all others.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched for C681/C684 (3000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 218
5’-0” 1050
Level Storage
10’-0” 262
5’-0” 1050
.179” formed steel channel)
HOW TO ORDER
C1632
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
7 C1632 15” 120” 3” B1070-1 RR B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
Note: Deduct the weight of the conveyor section from the above capacities to determine
ROLLER Standard - 2.56” Dia. x .180” (7 ga.) steel.FRAME Standard - 4” x 2” x .179” formed steel channel (standard paint).
Option - 4” at 5.4# structural steel channel (H rail) with rollers low.
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 60” (1” increments).
SECTION LENGTH Standard - 120”.
Option - 60”.
ROLLER CENTERS Option - 3”, 4”, 6”, 8” or 12”.
BEARINGS Standard - B1070-1 (11/16” hex bore).
Option - B1071-2 (grease packed) or regreasable specify R.G.).
AXLE Standard - 11/16” hex steel, Ring Ring (RR) construction.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched for C681/C684 (3000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 218
5’-0” 1050
Level Storage
10’-0” 262
5’-0” 1050
channel)
HOW TO ORDER
C1595
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
7 C1595 15” 120” 4” B1060-1 RR B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
Note: Deduct the weight of the conveyor section from the above capacities to determine
ROLLER Standard - 3.50” Dia. x .148” (9 ga.) steel.FRAME Standard - 4” x 2” x .179” formed steel channel (standard paint).
Option - 4” at 5.4# structural steel channel (H rail) with rollers low.
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 72” (1” increments).
SECTION LENGTH Standard - 120”
Option - 60”
ROLLER CENTERS Option - 4”, 6”, 8” or 12”.
BEARINGS Standard - B1060-1 (11/16” hex bore).
Option - B1064-2, B1062-2.
AXLE Standard - 11/16” hex steel, Ring Ring (RR) construction.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched or C681/C684 (3000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 218
5’-0” 1050
Level Storage
10’-0” 262
5’-0” 1050
channel)
HOW TO ORDER
C1597
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Bearing Axle Couplings Style
7 C1597 15” 120” 4” B1080-1 CC B 9
Between Frames (W)
Weight of 10’-0” Section
with Roller Spacing of Roller Capacity
Note: Deduct the weight of the conveyor section from the above capacities to determine
ROLLER Standard - 3.50’ Dia. x .300” steel.FRAME Standard - 6” x 2” x .179” formed steel channel (stainard paint).
Option - 6” at 8.2#/ft. structural steel channel (K Rail).
BETWEEN FRAMES (W) Standard - Minimum 6”, Maximum 72” (1” increments).
SECTION LENGTH Standard - 120”
Optin - 60”.
ROLLER CENTERS Option - 4”, 6”, 8” or 12”.
BEARINGS Standard - B1080-1 (1-1/6” hex bore).
Option - B1084-2, B1081-2 RG, B5263 shot guards (SG).
AXLE Standard - 1-1/4” hex steel, Cotter Cotter (CC) construction.
COUPLINGS Standard - Welded Butt (B).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Rollers low (style 10).
SUPPORT PUNCHING Standard - Punched for (6000# capacity) supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 470
5’-0” 1882
Level Storage
10’-0” 470
5’-0” 1882
HOW TO ORDER
C1599
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Options Bearing Axle Couplings Style
3 C1599 21” 120” 6” Shot
Guards B1100-1 CC 2S 3
Between Frames (W)
Weight of 10’-0” Section with
Roller spacing of Roller Capacity
ROLLER Standard - 4.25” Dia. x .438” steel.
FRAME Standard - 7” x 4 x .500” structural steel angle (standard paint).
BETWEEN FRAMES (W) Standard - Minum 9”, Maximum 72” (1” increments) with toes in (style 1).
Minimum 6”, Maximum 72” (1” increments) with toes out (style 3).
SECTION LENGTH Standard - 120”
Option - 60”.
ROLLER CENTERS Optin - 6” or 9”.
BEARINGS Standard - B1100-1 (1-1/4” hex bore).
Option - B1101-2 GP (grease packed), B1101-2 RG (regreasable), B5263 shot guards (SG).
AXLE Standard - 1-1/4” hex steel, Cotter Cotter (CC) construction.
COUPLINGS Stanard - Bolted strap (2S).
Option - Plain End (PE).
STYLE Standard - Rollers high (style 9).
Optional - Toes in (style 1) or toes out (style 3).
SUPPORT PUNCHING Standard Punched for C1570 (12000# capacity) supports, (see drawing below.
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 1082
5’-0” 4330
Level Storage
10’-0” 1082
5’-0” 4330
HOW TO ORDER
C1634
TREAD SECTION (Example):Quantity Code No. W Section
Length Centers Options Bearing Axle Couplings Style
7 C1634 21” 120” 9” RG B1120-2 CC 2S 3
Between Frames (W)
Weight of 10’-0” Section with
Roller spacing of Roller
Capacity
Note: Deduct the weight of the conveyor section from the above capacities to determine
ROLLER Standard - 5.00” Dia. x .750” (9 ga.) steel.FRAME Standard - 7” x 4” x .5” structural steel angle (standard paint).
BETWEEN FRAMES (W)
Standard - Minimum 9”, Maximum 72” (1” increments) with toes in (style 1).
Minimum 6”, Maximum 72” (1” increments) with toes out (style 3).
SECTION LENGTH Standard - 120”
Option - 60”.
ROLLER CENTERS Option - 6”, 9” or 12”.
BEARINGS Standard - B1120-2 GP (grease packed) (1-1/2” hex bore).
Option - B1120-2 RG (regreasable).
AXLE Standard - 1-1/2” hex steel, Cotter Cotter (CC) construction.
COUPLINGS Standard - Bolted strap (2S).
Option - Plain End (PE).
STYLE Standard - Rollers high with angle toes in (TI) Syle 1.
Optional - Rollers high with angle toes out (TO) Style 3.
SUPPORT PUNCHING Standard - Punched for C1570 (12000# capacity supports, (see drawing below).
FRAME CAPACITIES
Type Line Support Centers
Frame Capacity
lbs./ft.
Gravity Flow
10’-0” 1082
5’-0” 4330
Level Storage
10’-0” 1082
5’-0” 4330