CAPITULO 1. INTRODUCCIÓN
1.2. ANTECEDENTES BIBLIOGRÁFICOS EN EL ÁREA DE
9.1 Cineloop
9.1.1 Function description
In unfrozen state, images are stored continuously into the memory, when the memory is full, new images will replace previous images continuously. After freezing the image, the images stored in the memory before the image is frozen can be played back.
【Note 1】: The number of cine frames depends on the mode.
【Note 2】: When the mode is changed, all the temporarily stored cine images are deleted; when the system is unfrozen or is turned off, all the stored images are erased.
9.1.2 Operation methods
After images are frozen, B mode images can be played back in single frames.Moving the trackball left or right or rotating
B Gain
knob allows the user to view a certain number of previously saved images in the memeory before they are frozen.Press
Cine
key to start playing back B mode images continuously. PressCine
key again to exit cine and enter single-frame cine state. During cine state, rotateValue
knob to adjust cine speed.In single-frame cine state, the continuous cine range can be set up. Press
D
key and use the trackball to roll the long vertical line in the cine state indicator. PressEnter
to confirm the cine start point, then shift the long vertical line and pressEnter
again to confirm the cine end point. PressD
thenCine
to achieve continuous cine between the cine start point and the cine end point. Repeat the above steps to reset the range.9.2 File Storage
Press
Disk
key, and the following window will be shown:Fig. 9-1 Disk Management window 9.2.1 Write Image Quickly
If Write Image Quickly is selected, the file will be saved in a corresponding position as per the preset directory and the preset file type in Disk Setup (the file will be named as
“Patient ID+ Time”) and the Disk Management window is exited.
9.2.2 Read Image Quickly
If Read Image Quickly is selected, the following window will be shown:
Fig. 9-2 File List
The default file list is the file list preset in the directory of Disk Setup.
When the “ ” is highlighted, press
Space
key to exit the file folder; when the folder is highlighted, pressSpace
to enter the folder.Use the trackball to select the desired files in Bmp, Jpg, Cin or Avi format. Press
Enter
to open the file.9.2.3 Other Operation
Select Other Operation and Disk Management window will be shown. Select storage media, such as Hard disk, USB disk or CD drive. Then select Write image, Read image, Search, Copy, Rename, Create Dir, or Delete. If Write Image is selected, the write type needs to be selected, such as Bmp, Jpg, Cine or Avi. Then select the folder
(press
Space
key to enter the desired folder) and input the file name.During the operation, press
T-Ball
to return to the previous selection area and select again. PressEsc
to exit the current operation page and quit the operation. When recalling an image, pressEsc
to exit to the frozen state before entering recall state. PressFreeze
to exit the image display and enter the unfrozen working mode before image recall.
Search an image by entering a matching file (or folder) name. In the operation of copy, a pasted directory cannot be the same as a copied directory.
9.2.4 Disk Setup
Select Disk Setup and the following window will be shown. Operation object and image type can be set:
Fig. 9-3 Disk Setup
Select Destination Setup and press
Enter
. The destination list will appear. There are Hard disk, USB disk and CD drive for selection. Move the trackball to select and pressEnter
to confirm. If the setup needs no change, pressEsc
to return.Select Image Type Setup and press
Enter
. The image type list will appear. There are Bmp, Jpg, Cin and Avi for selection. The operation is the same with that of Destination Setup.Select Save Recall Mode and press
Enter
. There are Hard Disk and Memory for selection.Select Folder Format and press
Enter
. There are four options for selection: Date, Patient ID/ Date, Patient Name/ Date, and Patient ID- Name/ Date.9.3 Temporary Image Store and Recall
9.3.1 Write Image Quickly
In B, 2B, 4B, B/M or M mode, if Hard Disk is selected for Save Recall Mode in disk
manager window, press
Save
key to store the frozen images in the directory set in the disk manager (if it is in unfrozen state, the images will be frozen and then saved). If Memory is selected for Save Recall Mode in disk manager window, pressSave
key to temporarily store the frozen images in the memory. (If it is in unfrozen state, the images will be frozen and then saved).Before storing, enter the single-frame cine state first, and then use the trackball to select and store the desired images
9.3.2 Read Image Quickly
In B, 2B, 4B, B/M or M mode, if Memory is selected for Save Recall Mode in disk manager window, freeze the image and press
Recall
key to open file list window. Select the desired file and then pressEnter
key to read image quickly. While recalling images, the operation mode cannot be changed. In this case, measurement & calculation as well as annotation can be made on the image, the same as on a normal displayed image (but all the relevant information will be cleared after finishing the recall process). PressEsc
to exit the recall state.if Hard Disk is selected for Save Recall Mode in disk manager window, press
Recall
key to read the latest saved files based on the setup path and file type (Set up the default read path and file type in the Disk Manager window.) Press
Recall
again to read the previous file while pressingEnter
to read the next file.9.4 Image Print
Press