1. Introducción
1.4. Llenado del molde en procesos de fundición por inyección a presión
1.4.1. Aplicación de códigos CFD al llenado del molde
Description
EUCON AEA-92 is formulated for use as an air entraining admixture for concrete of all types and is manufactured under rigid control which assures uniform and precise performance. It should be added to the mix independently and not with other admixtures.
Primary Applications
• Ready mix concrete
• Structural concrete
• Mass concrete
• Paving concrete
• All exterior concrete
Features/Benefits
• Provides a stable air void system with proper bubble size and spacing. This air void system protects concrete against damage caused by repeated freeze/thaw cycles
• Concrete is made more resistant to de-icing salts, sulfate attack and corrosive water
• Less mixing water can be used per yard (meter) of concrete and placeability is improved
• Minimizes bleeding and segregation of the concrete
Shelf Life
2 years in original, unopened package.
Specifications/Compliances
EUCON AEA-92 meets or exceeds the requirements of the following specifications:
• Corps of Engineers Specification CRD C-13
• ASTM Specification C 260
• AASHTO Specification M 154
• ANSI/NSF STD 61
Packaging
EUCON AEA-92 is packaged in bulk, 275 gal (1041 L) totes, 55 gal (208 L) drums and 5 gal (18.9 L) pails.
EUCON AEA-92
Air En trainer s
Master Format #:03 30 00 03 40 00 03 70 00WARRANTY: The Euclid Chemical Company (“Euclid”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase. Unless authorized in writing by an officer of Euclid, no other representations or statements made by Euclid or its representatives, in writing or orally, shall alter this warranty. EUCLID MAKES NO WARRANTIES, IMPLIED OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any Euclid product fails to conform with this warranty, Euclid will replace the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within one (1) year from the date of the claimed breach. Euclid does not authorize anyone on its behalf to make any written or oral statements which in any way alter Euclid’s installation information or instructions in its product literature or on its packaging labels. Any installation of Euclid products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of Euclid’s products for the Buyer’s intended purposes.
Rev. 11.14
Precautions/Limitations
• Consult your local Euclid Chemical representative for the proper dosage rate adjustments when using fly ash, slag or high range water reducers.
• Add to the mix independent of other admixtures.
• In all cases, consult the Safety Data Sheet before use.
Directions for Use
EUCON AEA-92 is typically dosed at a rate of 0.1 to 4 oz per 100 lbs (6 to 260 mL per 100 kg) of total cementitious material to entrain 3% - 6% air content. The amount of EUCON AEA-92 will vary depending on type of cement, fineness of sand, temperature, design of the mix, other admixtures, etc. Concrete mixes must be tested regularly to confirm that proper air content is achieved. EUCON AEA 92 should be added directly to the sand to achieve maximum performance.
Address:
Contact: Date Issued:
Phone: Production period:
E-mail:[email protected] Destination:
TEST RESULT ITEM Spec. Limit TEST RESULT
(%) Blaine (m2/kg) min 260 413
Alkalis equivalent 0.58 28 days 5728
(4.75*C3A) + C3S (%) max 100 95.02
Limestone addition max 5 % 3.0
Sulfate expansion
Adjusted potential cement phase composition ASTM C150
Jaime Vidal/ Quality Manager ITEM (%) Spec. Limit
Setting time Vicat initial (minutes)
COMPRESSIVE STRENGTH (PSI)
MINERALOGICAL COMPOSITION PROCESSING ADDITION (If applicable):
The cement values represented by this certificate at the time of the shipment conform to the Standard requirements of the current edition of ASTM C150/ C150M and AASHTO (Specification) M85
(1) Cement is not exceeding the sulfate expansion at 14 days limit (ASTM-C1038)
Grinding aid TYPE I/II LOW ALKALI PORTLAND CEMENT
50, Route 132, Port-Daniel - Gascons
Cement type: Type I/II (Low Alkali) Canada (Québec) G0C 2N0
(1) 418 396 3331 Ext:2008 11-01-2019 to 11-31-2019
CHEMICAL PHYSICAL
ASTM C150 / AASHTO M85 ASTM C150 / AASHTO M85
US Market
Brand:
28 Day (previous month's data) 46.2 (6700)
Result Item Result
0.78 7 Day 29.0 (4200)
28 Day (previous month's data) 36.3 (5260)
4 - Specific Gravity: 2.91
Brian Borowski
Date Issued: 11/20/2019 Quality Manager, US MPC
General Information
Avg 7 Day Index
Avg 28 Day Index (previous month's data) Holcim (US) Inc. d/b/a LafargeHolcim US Source Location: Sparrows Point Plant
-Sulfate Sulfur (as SO3) 2 (%) - 12 max
Material Certification Report
NewCem
Material: Slag Cement Test Period: 01-Oct-2019 to 31-Oct-2019
Grade 120 Lot Number: Multiple Lots
Certification
This cement meets the specifications of ASTM C989 and AASHTO M 302 for Grade 120 slag cement.
Sulfide Sulfur (S) (%) 2.5 max 20 max
8700 West Bryn Mawr Ave Chicago, IL 60631
2001 Wharf Road Baltimore, MD 21219
Brian Borowski / (630) 243-4699
The following is based on average test data during the test period. The data is typical of product shipped from this source; individual shipments may vary.
Test Data on ASTM Standard Requirements
Chemical Physical
Equivalent Alkalies (%) 0.60 - 0.90
-5000 min
1 - Dashes in the limits columns means Not Applicable
2 - If calcium sulfate is added to slag cement, measure in accordance with Test Method C1038/C1038M. Slag cement with added calcium sulfate will not develop expansion exceeding 0.020% at 14 days.
3 - Information on Reference Cement test data available upon request.
5 - This data may have been reported on previous Material Certification Reports. It is typical of the cement being currently shipped.
The Euclid Chemical Company
www.euclidchemical.com 19215 Redwood Road • Cleveland, OH 44110
800-321-7628 t • 216-531-9596 f
Technical Information
EUCON AEA-92 is an aqueous solution compound of synthetic organic chemicals. It is compatible with concrete mixes containing calcium chloride, water reducing admixtures, retarding admixtures, or high range water reducers.
EUCON AEA-92
Air Entraining Agent For Concrete
Description
EUCON AEA-92 is formulated for use as an air entraining admixture for concrete of all types and is manufactured under rigid control which assures uniform and precise performance. It should be added to the mix independently and not with other admixtures.
Primary Applications
• Ready mix concrete
• Structural concrete
• Mass concrete
• Paving concrete
• All exterior concrete
Features/Benefits
• Provides a stable air void system with proper bubble size and spacing. This air void system protects concrete against damage caused by repeated freeze/thaw cycles
• Concrete is made more resistant to de-icing salts, sulfate attack and corrosive water
• Less mixing water can be used per yard (meter) of concrete and placeability is improved
• Minimizes bleeding and segregation of the concrete
Shelf Life
2 years in original, unopened package.
Specifications/Compliances
EUCON AEA-92 meets or exceeds the requirements of the following specifications:
• Corps of Engineers Specification CRD C-13
• ASTM Specification C 260
• AASHTO Specification M 154
• ANSI/NSF STD 61
Packaging
EUCON AEA-92 is packaged in bulk, 275 gal (1041 L) totes, 55 gal (208 L) drums and 5 gal (18.9 L) pails.
EUCON AEA-92
Air En trainer s
Master Format #:03 30 00 03 40 00 03 70 00WARRANTY: The Euclid Chemical Company (“Euclid”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase. Unless authorized in writing by an officer of Euclid, no other representations or statements made by Euclid or its representatives, in writing or orally, shall alter this warranty. EUCLID MAKES NO WARRANTIES, IMPLIED OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any Euclid product fails to conform with this warranty, Euclid will replace the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within one (1) year from the date of the claimed breach. Euclid does not authorize anyone on its behalf to make any written or oral statements which in any way alter Euclid’s installation information or instructions in its product literature or on its packaging labels. Any installation of Euclid products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of Euclid’s products for the Buyer’s intended purposes.
Rev. 11.14
Precautions/Limitations
• Consult your local Euclid Chemical representative for the proper dosage rate adjustments when using fly ash, slag or high range water reducers.
• Add to the mix independent of other admixtures.
• In all cases, consult the Safety Data Sheet before use.
Directions for Use
EUCON AEA-92 is typically dosed at a rate of 0.1 to 4 oz per 100 lbs (6 to 260 mL per 100 kg) of total cementitious material to entrain 3% - 6% air content. The amount of EUCON AEA-92 will vary depending on type of cement, fineness of sand, temperature, design of the mix, other admixtures, etc. Concrete mixes must be tested regularly to confirm that proper air content is achieved. EUCON AEA 92 should be added directly to the sand to achieve maximum performance.
Chemical
Item Limit ¹ Result
MgO (%) 6.0 max 2.7
Sulfate as SO3 (%) ² 4.0 max 3.6
Loss on Ignition (%) 5.0 max 3.6
Equivalent Alkalies (%) - 1.0
Fly Ash (%) 40 max
-Silica Fume (%) 40 max 9
Natural Pozzolan (%) 40 max
-Physical
Item Limit ¹ Result
+45 um (No. 325) Sieve (%) - 2.4
Blaine Fineness (m²/kg) - 647
Density (g/cm³) (Specific Gravity) - 3.0
Autoclave (%) (C151) -0.20-0.80 0.03
Initial Vicat (minutes) 45-420 120
Air Content (%) 12 max 10
Compressive Strength MPa (psi)
3 day 13.0 (1890) min 24.8 (3600)
7 day 20.0 (2900) min 34.5 (5000)
28 day (previous month's data) 25.0 (3630) min 51.6 (7480) Mortar Bar Expansion (%) (C1038) 0.020 max 0.003 Sulfate Exp. @180 days(%) (C1012)³ 0.10 max 0.02 Test Data on ASTM Standard Requirements
This cement meets the specifications of ASTM C595 and AASHTO M240 for Type IP cement.
Certification General Information
The following is based on average test data during the test period. The data is typical of product shipped from this source; individual shipments may vary.
Supplier:
Address: 8700 West Bryn Mawr Ave Chicago, IL 60631
Holcim (US) Inc. d/b/a LafargeHolcim US
Contact:
Source Location:
Contact:
Test Data on ASTM Optional Requirements
Physical
¹ Dashes in the limits columns means Not Applicable
² It is permissible to exceed the specification limit provided that ASTM C1038 Mortar Bar Expansion does not exceed 0.020% at 14 days.
³ Current Production run not available; most recent results provided. The ASTM C1012 limit for moderate sulfate expansion is 0.10% maximum at 180 days;
the limit for high sulfate expansion is either 0.05% maximum at 180 days or 0.10% maximum at one year.
We certify that the above described cement, at the time of shipment, meets the chemical and physical requirements of ASTM C-595 and AASHTO M-240.
Meets the chemical and Physical requirements of ASTM C-595 and AASHTO M-240
This product meets the requirements of NYSDOT Item 701-03, Type SF blended cement, with alkali levels which exceed 0.70%
Brand:
28 Day (previous month's data) 46.2 (6700)
Result Item Result
0.78 7 Day 29.0 (4200)
28 Day (previous month's data) 36.3 (5260)
4 - Specific Gravity: 2.91
Brian Borowski
Date Issued: 11/20/2019 Quality Manager, US MPC
General Information
Avg 7 Day Index
Avg 28 Day Index (previous month's data) Holcim (US) Inc. d/b/a LafargeHolcim US Source Location: Sparrows Point Plant
-Sulfate Sulfur (as SO3) 2 (%) - 12 max
Material Certification Report
NewCem
Material: Slag Cement Test Period: 01-Oct-2019 to 31-Oct-2019
Grade 120 Lot Number: Multiple Lots
Certification
This cement meets the specifications of ASTM C989 and AASHTO M 302 for Grade 120 slag cement.
Sulfide Sulfur (S) (%) 2.5 max 20 max
8700 West Bryn Mawr Ave Chicago, IL 60631
2001 Wharf Road Baltimore, MD 21219
Brian Borowski / (630) 243-4699
The following is based on average test data during the test period. The data is typical of product shipped from this source; individual shipments may vary.
Test Data on ASTM Standard Requirements
Chemical Physical
Equivalent Alkalies (%) 0.60 - 0.90
-5000 min
1 - Dashes in the limits columns means Not Applicable
2 - If calcium sulfate is added to slag cement, measure in accordance with Test Method C1038/C1038M. Slag cement with added calcium sulfate will not develop expansion exceeding 0.020% at 14 days.
3 - Information on Reference Cement test data available upon request.
5 - This data may have been reported on previous Material Certification Reports. It is typical of the cement being currently shipped.
The Euclid Chemical Company
www.euclidchemical.com 19215 Redwood Road • Cleveland, OH 44110
800-321-7628 t • 216-531-9596 f
Technical Information
EUCON AEA-92 is an aqueous solution compound of synthetic organic chemicals. It is compatible with concrete mixes containing calcium chloride, water reducing admixtures, retarding admixtures, or high range water reducers.
EUCON AEA-92
Air Entraining Agent For Concrete
Description
EUCON AEA-92 is formulated for use as an air entraining admixture for concrete of all types and is manufactured under rigid control which assures uniform and precise performance. It should be added to the mix independently and not with other admixtures.
Primary Applications
• Ready mix concrete
• Structural concrete
• Mass concrete
• Paving concrete
• All exterior concrete
Features/Benefits
• Provides a stable air void system with proper bubble size and spacing. This air void system protects concrete against damage caused by repeated freeze/thaw cycles
• Concrete is made more resistant to de-icing salts, sulfate attack and corrosive water
• Less mixing water can be used per yard (meter) of concrete and placeability is improved
• Minimizes bleeding and segregation of the concrete
Shelf Life
2 years in original, unopened package.
Specifications/Compliances
EUCON AEA-92 meets or exceeds the requirements of the following specifications:
• Corps of Engineers Specification CRD C-13
• ASTM Specification C 260
• AASHTO Specification M 154
• ANSI/NSF STD 61
Packaging
EUCON AEA-92 is packaged in bulk, 275 gal (1041 L) totes, 55 gal (208 L) drums and 5 gal (18.9 L) pails.
EUCON AEA-92
Air En trainer s
Master Format #:03 30 00 03 40 00 03 70 00WARRANTY: The Euclid Chemical Company (“Euclid”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase. Unless authorized in writing by an officer of Euclid, no other representations or statements made by Euclid or its representatives, in writing or orally, shall alter this warranty. EUCLID MAKES NO WARRANTIES, IMPLIED OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any Euclid product fails to conform with this warranty, Euclid will replace the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within one (1) year from the date of the claimed breach. Euclid does not authorize anyone on its behalf to make any written or oral statements which in any way alter Euclid’s installation information or instructions in its product literature or on its packaging labels. Any installation of Euclid products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of Euclid’s products for the Buyer’s intended purposes.
Rev. 11.14
Precautions/Limitations
• Consult your local Euclid Chemical representative for the proper dosage rate adjustments when using fly ash, slag or high range water reducers.
• Add to the mix independent of other admixtures.
• In all cases, consult the Safety Data Sheet before use.
Directions for Use
EUCON AEA-92 is typically dosed at a rate of 0.1 to 4 oz per 100 lbs (6 to 260 mL per 100 kg) of total cementitious material to entrain 3% - 6% air content. The amount of EUCON AEA-92 will vary depending on type of cement, fineness of sand, temperature, design of the mix, other admixtures, etc. Concrete mixes must be tested regularly to confirm that proper air content is achieved. EUCON AEA 92 should be added directly to the sand to achieve maximum performance.
The Euclid Chemical Company
19218 Redwood Rd. • Cleveland, OH 44110
Phone: [216] 531-9222 • Toll-free: [800] 321-7628 • Fax: [216] 531-9596 www.euclidchemical.com
PLASTOL 5000