24. Quantification and reduction of fouling by change in hydrodynamics and membrane surface modifications (DST, Rs.11.00 Lakhs) 25. Rapid DNA hybridization in microfluidic channels (DBT, Rs.42.00 Lakhs)
26. Steel Technology Centre (TCB) (Ministry of Steel & DST, New Delhi, Rs.2025.00 Lakhs)
27. Tuneable Meso Patterning of Polymer Bilayer Thin Films with Electric Field (ISIRD Grant of SRIC, IIT Kharagpur, Rs.5.00 Lakhs) 28. Upgradation of Coal Fines in a Column Flotation Cell (CSIR, New Delhi, Rs.3.71 Lakhs)
29. Water lubricated transport of high viscous oils - Experimentation and theory (DST, Rs.19.00 Lakhs)
Consultancy Projects
2. Consultancy services for implementation of APC in DCU and HCU (NRL Ltd, Rs.7.72 Lakhs)
3. Design and development of a mathematical model for ultra fast cooling of steel strips (DDMM) (Tata Steel, Jamshedpur, Rs.0.00 Lakhs)
4. Design verification and critical analysis of bag filters installed at sponge iron plant in Orissa (CABF) (Orissa State PCB, Rs.0.00 Lakhs)
5. Development of gas sweetening technology for removal of co2 from natural gas (Engineers India Limited, Rs.30.00 Lakhs) 6. Development of Long Fiber Thermoplastic Composites (IIT Kharagpur, Rs.3.00 Lakhs)
7. Development of mixing model for alloy dissolution in steel ladles (MMAD) (Tata Steel, Jamshedpur, Rs.0.00 Lakhs) 8. Development of Natural fiber SMC (Continental Structural Plastics, Troy, MI, Rs.32.00 Lakhs)
9. Feasibility Study on Calcium Reduction in Ground and Blowdown Water of Thermal Power Stations Using Zeolite to be Synthesized from Lignite Fly Ash (Neyveli Lignite Corporation Limited, Rs.19.00 Lakhs)
10. Modelling of Chocolate behavior during tempering and cooling process (CBTP) (Cadbury India Ltd, Thane, Rs.4.00 Lakhs) 11. Modelling of thermite based closed cycle thermal system (CCTS) (HEMRL (DRDO), Pune, Rs.9.00 Lakhs)
12. Optimization, characterization and casting of haemodialysis membranes (Acropetal Pvt. Ltd, Rs.21.00 Lakhs) 13. Process Simulation and Material Balance of Uran Plant (Oil and Natural Gas Commission, Rs.6.47 Lakhs)
14. Renewable resource/bio-based low density SMC development (Continental Structural Plastics, 755 West Big Beaver Road, Suite 700, Troy, MI 48084, USA, Rs.30.00 Lakhs)
15. Study and Modeling of Gas Processing Plant at Uran (ONGC, Rs.6.70 Lakhs)
16. Surface energy Modification of SMC subtrates using RF Plasma (CSP Plastics, TROY, MICHIGAN, USA, Rs.4.00 Lakhs) 17. Survey of Biogas Plants in West-Bengal (West-Bengal Renewable Energy Agency, Rs.2.50 Lakhs)
18. Testing & prototype manufacturing of composite products. (Various Organizations, Rs.5.00 Lakhs)
19. Training Programme on Pultrusion Technology with Introduction to other Fabrication Method. (Zoom Developers, Rs.0.60 Lakhs)
Patents (filed / granted)
1. A Novel Set up for Spinning Polymeric Hollow Fiber Membrane
2. Harikrishnan G, Macosko CW, Lindsay CI, Singh, SN. Clay – Isocyanate nano dispersions and polyurethane nanocomposite produced there with
3. Harikrishnan G, Patro TU, Khakhar DV. Clays as cell openers in polyurethane foams
4. Harikrishnan G, Patro TU, Khakhar DV. Reticulated vitreous carbon with controlled pore size and enhanced electrical conductivity from open cell polyurethane foam precursors containing montmorillonite based clays
Visits Abroad by Faculty Members
1. Mukherjee, Rabibrata - Meetings in connection with Indo US centre of Excellence in Research on Fabrionics (University of California, Irvine and Northwestern University, USA, ) June 26 - July 10
2. Meikap, Bhim Charan - Collaborative Research Meeting (University of Malaya, Kuala Lumpur, Malaysia, ) June 12-18, 2010 3. Meikap, Bhim Charan - To Chair a Technical Session on Transport Processes and Novel Separation Technologies13th APCChE
(Taipei, Taiwan,, ) 5-8, October, 2010
4. Kundu, Gautam - Guest professor and worked on investigation of a novel micro bubble column reactor. (Technical University of Dresden, Germany, ) May – July, 2010
5. Mukherjee, Rabibrata - Meeting in connection with Indo US colaborative project (University of Akron Ohio, Northwestern University and University of Illinois, Chicago, USA, ) 2 weeks
6. Meikap, Bhim Charan - to accept the position of Professor , School of Chemical Engineering. (University of Kwazulu-Natal, Durban, South Africa, ) June 2009 to December 2010
7. De, Sirshendu - To Chair a session on Transport Processes and Novel separation Technologies (13th Asia Pacific Confederation of Chemical Engineers, Taipei, Taiwan, ) 5-8 October, 2010
8. De, Sirshendu - Visiting Professor (Department of Mechanical Engineering, University of Alberta, Canada, ) June 2 to July 18, 2010
9. Mukherjee, Rabibrata - Attend and deliver invited talk at DPG Spring Meeting (Dresden, Germany, ) March 13 -18 2011 10. Meikap, Bhim Charan - To Chair and participate in a Conference (ETH Technical University of Zurich, Switzerland, ) September
11-15, 2011
Invited Lectures by Faculty Members
1. Instability and Patterning of Thin Polymer Films by Mukherjee, Rabibrata (Dept of Polymer Engineering, University of Akron) 2. Research trends in membrane separation laboratory at IIT Kharagpur by De, Sirshendu (Seimens IT Solutions and Services,
Bangalore)
3. Modeling of pore blocking during cross flow membrane filtration by De, Sirshendu (Department of Mechanical Engineering, University of Alberta, Canada)
4. How to write a reasonable PhD thesis by De, Sirshendu (Special Guest lecture in HSS course “English for technical writings†, IIT Kharagpur,)
5. Extraction and clarification of stevioside using membrane separation processes by De, Sirshendu (13th Asia Pacific Confederation of Chemical Engineers, Taiwan)
6. Industrial waste water treatment: Use of membrane based processes by De, Sirshendu (AICTE short term course on Solids and Hazardous Waste Management)
7. Modeling approaches of Membrane Based Separation Processes by De, Sirshendu (Herdillia award lecture in CHEMCON 2010, Annamalainagar, Tamilnadu)
9. Influence of Pattern Height on Dewetting of Polymer Thin Films on a Patterned Substrate by Mukherjee, Rabibrata (Dresden, Germany)
10. Spontaneous Dewetting of Ultra Thin Films by Mukherjee, Rabibrata (Kolkata, at National Seminar on Modelling of Natural Phenomena)
11. Thin Polymer Film Instability Dewetting and Pattern Formation by Mukherjee, Rabibrata (Kolkata, Indo Canadian Workshop (IIT Kgp - U Alberta))
12. Template Guided Self Organization by Mukherjee, Rabibrata (Aurangabad, Indo US Workshop on Fabrionics 2011)
13. Soft Fabrication: Soft Lithography and Beyond by Mukherjee, Rabibrata (Aurangabad, Indo US Student Workshop on Fabrionics 2011)
14. Micro, Meso and Nano Patterning of Soft Surfaces by Mukherjee, Rabibrata (IIT Guwahati, QIP Course on Recent Advancement of Intelligent Materials and its Applications)
15. Fabrication and Application of Meso Patterned Polymer Films by Mukherjee, Rabibrata (Aurangabad, Jwaharlal Nehru Engineering College)
16. Glimpses of Activity on Soft Patterning Relevant to Plasmonic and Nanostructured Solar Cells by Mukherjee, Rabibrata (Delhi University, DST brainstorming Meeting on Plasmonic & Nanostructured Solar Cells)
17. Air Pollution Control by wet scrubbing Techniques by Meikap, Bhim Charan (Manosuthu University of Technology, Umlazi, Durban, South AFrica)
18. Ejector induced downflow bubble column – A novel contactor for gas-liquid system by Kundu, Gautam ( TU Dresden , Germany) 19. Column flotation cell – A novel application of slurry bubble column by Kundu, Gautam (Technical University of Braunscheweig ,
Germany)
20. The March of Chemical Engineering into the 21st century by Das, Gargi (Thrissur) 21. Fundamentals of Mutiphase flow by Das, Gargi (Thrissur)
Books Published
1. Sirshendu De: Novel Separation Processes published by NPTEL, MHRD (2010)
Papers Published in Journals
1. Reticulated vitreous carbon from polyurethane foam clay composites By Harikrishnan G, Patro TU, Khakhar DV Carbon 45, 531-535 (2007)
2. 1.Study 0f Gas Holdup and Pressure Characteristics in a Column Flotation Cell Using Coal By S.. Shukla, G. Kundu, and D. Mukherjee Minerals Engineering Vol. 23, pp 636-642 (2010)
3. 2. Development of Manufacturing Technology for Cab Front using Resin Transfer Moulding By Raghuraj Pandiya, Gautam Kundu , Swati Neogi and Jiten Patel Journal of Composite Materials March 10, 2010, doi: (2010)
4. 3. Gas Newtonian and gas non Newtonian slug flow in vertical pipe: Part – I Gas Holdup characteristics By Subrata kumar Majumder, Sandip ghosh, Arun kumar Mitra and Gautam Kundu International Journal of Chemical Reactor Engineering Vol.8, pp – 1-25 (2010)
5. 6. Studies on Upflow Bubble Column with Glass Beads Internals By R. N. Mohapatro, S. Pradeep, S. C. Shukla, and G. Kundu Journal of The Institution of Engineers (India) Chemical Vol 90, pp 33-36 (2010)
6. 7. Abhijit Maiti, Vaibhav Agarwal, Sirshendu De, Jayanta K. Basu, Removal of As(V) using iron oxide impregnated carbon prepared from Tamarind hull By A. Maiti, V Agarwala, S. De J. K. Basu Journal of Environmental Science and Health, Part A 45(5), 1207 – 1216 (2010)
7. A criterion to avoid starvation zones for convection-diffusion-reaction problem inside a porous biological pellet under oscillatory flow By J. Prakash, G. P. Rajasekhar, S. De International Journal of Engineering Science 48 , 693-707 (2010)
8. A fouling model for steady state cross flow membrane filtration considering sequential intermediate pore blocking and cake formation By S. Mondal and S. De Separation & Purification Technology 75 , 222-228 (2010)
9. A generalized model for clarification of fruit juice during ultrafiltration under total recycle and batch mode By S. Mondal, A. Cassano, V. Tasselli, S. De Journal of Membrane Science 366 , 295-303 (2011)
10. A kinetic approach to the esterification of maleic anhydride with methanol on H-Y zeolite By Shivareddy Induri, Sonali Sengupta, Jayanta K. Basu J. Ind. Eng. Chem 16, 467-73 (2010)
11. A New Intensified Heat Integration in Distillation Column By Mane, A. and Jana, A. K. Industrial & Engineering Chemistry Research 49, 9534-9541 (2010)
12. A simple transient method for measurement of thermal conductivity of rigid polyurethane foams By Harikrishnan G, Macosko CW, Choi JH, Bischoff JC, Singh SN J. Cell. Plast 44, 481-491 (2008)
13. A two dimensional model of the transient and steady state characteristics of a wicked heat pipe with experiments By P.R. Mistry, F. M. Thakkar, S. De, S. DasGupta Experimental Heat Transfer 23, 333-348 (2010)
14. Ammonia Sensing by HCl Doped Poly(m-aminophenol)-silver Nanocomposite By Pradip Kar, Narayan C. Pradhan and Basudam Adhikari Journal of Materials Science 46(9), 2905-2913 (2011)
15. An appraisal of liquid–liquid slug flow in different pipe orientations By T. K. Mandal, G. Das, P.K. Das International Journal of Multiphase Flow, 36, 661-671 (2010)
16. CFD modeling of water flow through sudden contraction and expansion in a horizontal pipe By 3. V. V. R. Kaushik, S. Ghosh, G. Das, P. K. Das Chemical Engineering Education 45(1),Winter, 30-36 (2011)
17. Chemical treated laterite as fluoride adsorbent for aqueous system and kinetic modeling By A. Maiti, J. K. Basu and S. De Desalination 265, 28-36 (2011)
18. Clay nanoplatelet induced morphological evolutions during polymeric foaming (in press) By Harikrishnan G, Patro TU, Unni AR and Khakhar DV Soft Matter DOI:10.1039/C1SM0567 (2011)
19. COD reduction of petrochemical industry wastewater using Fentons oxidation By Prabir Ghosh, A. N. Samanta and Subhabrata Ray The Canadian Journal of Chemical Engineering 88, 1021-1026 (2010)
20. Color Diminution and COD Reduction in Treatment of Colored Effluent by Electrocoagulation By A.K. Golder, H. Kumar, A.N. Samanta and S. Ray Int. J. Environ. Eng. 2(1/2/3) (2010)
21. Convection, diffusion and reaction inside a spherical porous pellet in presence of oscillatory flow By J. Prakash, G. P. Rajasekhar, S. De European Journal of Mechanics – B/Fluids 29 , 483-493 (2010)
22. Convection-diffusion-reaction inside a porous sphere under oscillatory flow including external mass transfer By J. Prakash, S. De and G. P. Rajasekhar Fluid Dynamics Research, 43, 015508 (2011)
23. Coupled concentration polarization and pore flow modeling of nanofiltration of an industrial textile effluent By P. Banerjee and S. De Separation and Purification Technology 73, 355-362 (2010)
24. Development of a treated laterite for arsenic adsorption: Effects of treatment parameters By A. Maiti, J. K. Basu and S. De Industrial Engineering Chemistry Research 49 (10) 4873-4886 (2010)
25. Development of Soft Sensor to Identify Flow Regimes in Horizontal Pipe Using Digital Signal Processing Technique By K. Muvvala, V. Kumar, B.C. Meikap and S. Chakraborty Industrial & Engineering Chemistry Research 49 (6), 3001-3010 (2010) 26. Displacement of Cr(III) – partially hydrolyzed polyacrylamide gelling solution in a fracture in porous media By Somenath
Ganguly Transport in Porous Media 84, 201-218 (2010)
27. Dynamic Simulation of Mixing-limited Symmetric and Asymmetric Patterns in Homogeneous Autocatalytic Reactors By Anwesha Chaudhury and Saikat Chakraborty Industrial & Engineering Chemistry Research 49 (21), 10517–23 (2010)
28. Dynamics of mixing-limited pattern formation in non-isothermal homogeneous autocatalytic reactors: a low-dimensional computational analysis By Anwesha Chaudhury and Saikat Chakraborty Industrial & Engineering Chemistry Research DOI: 10.1021/ie10186 (2011)
29. Economic challenges in high-ash Indian coal preparation By S. Mohanta, S. Chakraborty and B. C. Meikap International Journal of Coal Preparation and Utilization Vol 30 pp 295–309 (2010)
30. Effect of monomer temperature on foaming and properties of flexible polyurethane foams, By Harikrishnan G and Khakhar DV J. App. Polym. Sci. 105, 3439-3443 (2007)
31. Effect on Structure, Processability, and Conductivity of Poly(m-aminophenol) of the Initial Acidity/Basicity of the Polymerization Medium By Pradip Kar, Narayan C. Pradhan and Basudam Adhikari Journal of Macromolecular Science B: Physics 49(4), 669- 679 (2010)
32. Effective bacterial inactivation using low temperature radio frequency plasma By Sureshkumar A, Sankar R, Mandal M, Neogi S. International Journal of Pharmaceutics 396(1-2):17-22 (2010)
33. Electric field enhanced gel controlled cross-flow ultrafiltration under turbulent flow conditions By B. Sarkar and S. De Separation and Purification Technology 74, 73-82 (2010)
34. Electroosmotic flow of power-law fluids at high zeta potentials By N. Vasu and S. De Colloids and Surfaces A: Physicochemical and Engineering Aspects 368 , 44-52 (2010)
35. Electroviscous effects in purely pressure driven flow and stationary plane analysis in electroosmotic flow of power-law fluids in a slit microchannel By N. Vasu and S. De International Journal of Engineering Science 48, 1641-1658 (2010)
36. Enhancement of Rheological Behavior of Indian High Ash Coal-Water suspension by using Microwave Pre-Treatment By B. K. Sahoo, S. De , M. Carsky and B.C. Meikap Industrial & Engineering Chemistry Research 49 (6), 3015-3021 (2010) 37. Epoxidation of Jatropha (Jatropha curcas) Oil by Peroxyacids By Vaibhav V. Goud, Srikanta Dinda, Anand V. Patwardhan and
Narayan C. Pradhan Asia-Pacific Journal of Chemical Engineering 5(2), 346-354 (2010)
38. Experimental Validation of a Two Dimensional Model of the Transient and Steady State Characteristics of a Wicked Heat Pipe By R. Mistry, F. Thakkar, S. De, S. DasGupta Experimental Heat Transfer 23 , 333-348 (2010)
39. Flux decline during cross flow membrane filtration of electrolytic solution in presence of charged nano-colloids: A simple electrokinetic model By S. De and S. Bhattacharjee Journal of Colloid & Interface Science 353, 530-536. (2011)
40. Flux enhancement during ultrafiltration of depectinized mosambi (Citrus sinensis (L.) Osbeck) juice By P. Rai, G. C. Majumdar, S. DasGupta and S. De Journal of Food Process Engineering 33 (3), 554-567 (2010)
41. Formation and characterization of polyurethane – vermiculite nanocomposite foams By Patro TU, Harikrishnan G, Misra A, Khakhar DV Polym. Engg. Sci. 48, 1778-1784 (2008)
42. Heat Pump Assisted Reactive Distillation: Wide Boiling Mixture By Jana, A. K. and Mane, A. AIChE Journal DOI10.1002/aic.12518 (2011)
43. Identification and prediction of air core diameter in a hydrocyclone by a Novel Online Sensor based on Digital Signal Processing Technique By V. Krishna, R. Sripriya, V. Kumar, S. Chakraborty, B. C. Meikap Chemical Engineering and Processing: Process Intensification 49(2), 165-176 (2010)
44. Identification of Stable Operating Ranges of a Counter-Current Multi-Stage Fluidized Bed Reactor with Downcomer By C.R. Mohanty, B. Rajmohan, B.C. Meikap Chemical Engineering and Processing: Process Intensification 49, 104-112 (2010) 45. Improvement of performance efficiency of a hydrocyclone with design modification by suppressing air core By R. Sripriya R, S.
Nikkam, S. Chakraborty and B. C. Meikap Korean Journal of Chemical Engineering Vol 28, pp. 225-231 (2011)
46. Induced Doping by Sodium Ion in Poly(m-aminophenol) Through the Functional Groups By Pradip Kar, Narayan C. Pradhan and Basudam Adhikari Synthetic Metals 160, 1524-1529 (2010)
47. Iron ore grindability improvement by microwave pre-treatment By P. Kumar, B.K. Sahoo, S. De, D. D. Kar, S. Chakraborty and B. C. Meikap, Journal of Industrial and Engineering Chemistry Vol 16, pp 805-812 (2010)
48. Kinetic studies on hydrolysis of urea in a semi-batch reactor at atmospheric pressure for safe use of ammonia in a power plant for flue gas conditioning By 14. K. Mahalik, J. N. Sahu, A. V. Patwardhan and B. C. Meikap Journal of Hazardous Materials 175, 629–637 (2010)
49. Kinetics of Reactive Absorption of Carbon Dioxide with Solutions of 1,6-Hexamethylene-diamine in Polar Protic Solvents By Srikanta Dinda, Anand V. Patwardhan, Narayan C. Pradhan and Vaibhav V. Goud Separation and Purification Technology 75(1), 1-7 (2010)
50. Mixing Effects in Cellulase-mediated Hydrolysis of Cellulose for Bio-ethanol Production By Saikat Chakraborty, Aniket, Ashwin Gaikwad Industrial & Engineering Chemistry Research 49 (21), 10818–25 (2010)
51. Modeling and Transport Parameters during Nanofiltration of Degreasing Effluent from a Tannery By C. Prabhavathy and S. De Asia Pacific Journal of Chemical Engineering, 6 , 101-109 (2011)
52. Modeling of crystal morphology distributions. Towards crystals with preferred asymmetr By Jayanta Chakraborty, Meenesh R. Singh, Doraiswami Ramkrishna, Christian Borchert and Kai Sundmacher Chemical Engineering Science 65, 5676-5682. (2010) 53. Modeling of extraction of dyes and their mixtures from aqueous solution using emulsion liquid membrane By A. K. Agrawal, C.
Das and S. De Journal of Membrane Science 360, 190-201 (2010)
54. Modeling of Flux Enhancement in Presence of Concentration Polarization by Pressure Pulsation during Laminar Cross Flow Ultrafiltration By K. Kumar and S. De Membrane Water Technology: An International Journal, 1 (4), 253-272 (2010) 55. Modeling the dynamics of reactive foaming and film thinning in polyurethane foams By Harikrishnan G and Khakhar DV AIChE
56. Modeling the operation of a three-stage fluidized bed reactor for removing CO2 from flue gases By C.R. Mohanty, B.C. Meikap Journal of Hazardous Materials 187(1-3), 113-121 (2011)
57. Modification of Epoxidized Canola Oil for Lubricant Formulations By Rubeena Mungroo, Narayan C. Pradhan, Ajay K. Dalai and Vaibhav V. Goud Asia-Pacific Journal of Chemical Engineering 6(1), 14-22 (2011)
58. Nanodispersions of Carbon nanofiber for polyurethane foaming By Harikrishnan G, Singh SN, Kiesel E, Macosko CW Polymer 51, 3349-3353 (2010)
59. Neuro-Estimator based GMC Control of a Batch Reactive Distillation By Jithin Prakash, K. J., Dipesh Patil, and Jana, A. K. ISA Transactions 10.1016/j.isatra.201 (2011)
60. Nonlinear Control of a Batch Reactive Rectifier By Patra, A., Dave, D. M. and Jana, A. K. Industrial & Engineering Chemistry Research DOI10.1021/ie101315b (2011)
61. Optimisation of oxidative desulphurisation of thiophene using Cu/Titanium silicate-1 by box-behnken design By N. Jose, S. Sengupta and J.K.Basu Fuel 90, 226-232 (2011)
62. Optimization for production of ammonia from urea in a semi-batch reactor for safe feedstock in power plants: Experimental and statistical studies By J .N. Sahu, A.V. Patwardhan, B.C. Meikap CLEAN - Soil, Air, Water 38 (5-6), 533-542 (2010) 63. Optimization for the Chemical Synthesis of Conducting Poly (m-aminophenol) in HCl using Ammonium Persulfate By High
Performance Polymers 22, 428-441 (2010)
64. Optimization of ammonia production from urea in continuous process using ASPEN Plus and computational fluid dynamics study of the reactor used for hydrolysis process, By J. N. Sahu, B. C. Meikap Journal of Industrial and Engineering Chemistry 101(6) 1974-1982 (2010)
65. Optimization of production conditions for activated carbons from Tamarind wood by zinc chloride using response surface methodology By J. N. Sahu, Joiti K. Acharya, B. C. Meikap Bioresource Technology 101,1974–1982 (2010)
66. Oxidation kinetics of degradation of 1,4-dioxane in aqueous solution by H2O2/Fe(II) system By Prabir Ghosh, A N Samanta, S Ray Journal of Environmental Science and Health, Part A 45, 395-399 (2010)
67. Performance characteristics of pilot plant dense media hydrocyclone for beneficiation of coal and 3-D CFD simulation By Parate Dinesh Suresh, V. Kumar, R. Sripriya, S. Chakraborty and B.C. Meikap Chemical Engineering Science Vol 65 pp 4661–467 (2010)
68. Performance Investigation of a Variable Speed Vapor Recompression Reactive Batch Rectifier By Johri, K., Babu, G. U. B., and Jana, A. K. AIChE Journal DOI10.1002/aic.12546 (2011)
69. Polyurethane foam - clay nanocomposites: Nano-clays as cell openers By Harikrishnan G, Patro TU, Khakhar DV Ind. Engg. Chem. Res. 45, 7126-7134 (2006)
70. Population balance modeling of environment dependent breakage: role of granular viscosity, density and compaction. Model formulation and similarity analysis By Jayanta Chakraborty and Doraiswami Ramkrishna Industrial and Engineering Chemistry Research Accepted (0)
71. Prediction of permeate flux for turbulent flow in cross flow electric field assisted ultrafiltration By B. Sarkar and S. De Journal of Membrane Science 369, 77-87 (2011)
72. Pressure drop analysis for liquid-liquid downflow through vertical pipe By S. Ghosh, G. Das, P. K. Das Trans ASME, Journal of Fluid Engineering 133, 011202 (2011)
73. Probing nano-dispersions of clays for reactive foaming By Harikrishnan G, Lindsay CI, Arunagirinathan MA, Macosko CW ACS Applied Materials & Interfaces 1, 1913-1918 (2009)
74. Production of Cellulosic Fuels: a review By Saikat Chakraborty and Ashwin Gaikwad Proceedings of National Academy of Sciences India 81 A (2011)
75. Quantification of transient flux decline during membrane separation of tanning effluent from tannery By C. Das, S. DasGupta, Y. T. Hung and S. De International Journal of Environmental Engineering 2 (1/2/3), 31 – 42 (2010)
76. Reduction of COD and removal of Zn2+ from rayon industry wastewater by combined electro-Fenton treatment and chemical precipitation By Prabir Ghosh, Amar Nath Samanta, Subhabrata Ray Desalination 266, 213-217 (2011)
77. Removal of arsenic from synthetic and natural groundwater using acid activated laterite By Abhijit Maiti, Jayanta Kumar Basu and Sirshendu De Env. Progress and Sustainable Energy(AICheE) online published (2010)
78. Removal of As(V) using iron oxide impregnated carbon prepared from tamarind hull By A. Maiti, V. Agarwal, J. K. Basu and S.