CALIFICACIÓN, PLAZO Y SILENCIO ADMINISTRATIVO * Ley N° 27444, Ley de Procedimiento Administrativo General (10.04.2001)

When the TGT LIST icon menu is opened, the ARPA target and AIS target lists will appear. Each target can be sorted in order of CPA, TCPA, Speed, BCR, BCT, and Range.

Reference:

The total number of ARPA targets is 100.

The total number of AIS targets can be up to 200 targets in CHART DISP -> Target

-> AIS Target.

- <<, >>: Sort By:

CPA/TCPA/Speed/BCR/ BCT/Range

- CPA : Cross Point Approach - TCPA : Tme Cross Point

Approach - BRG : Bearing - RNG : Range

- BCR : Bow Cross Range - BCT : Bow Cross Time

ARPA target :

Numbers 1 through 100 are allocated in order of acquier. The numbers will be kept on hold until the power is turned OFF even if the targets are deleted.

2.4 Box Menu for Chart Radar or Radar Mode

In the case of displaying ARPA or AIS targets individually, locate the cursor on the targets to be displayed so that Info: [xx |Info| xx] will be displayed in the guidance area, and click the scrollwheel. Up to four ARPA or AIS targets can be displayed.

To display further detailed target information, locate the cursor in the data area so that

Show Details：[Show Details | | xx] will be displayed in the guidance area. Then click

the left button.

ARPA data AIS data

X : Active

(AIS targets are activated.) ： Sleep

(Sleep target)

Detailed ARPA data

Detailed AIS data > TGT DETAILS

- Show Tgt Name - Show Tgt Call Sign

Used to select the vessel’s name or call sign for an AIS target. Target numbers are always displayed in the case of the ARPA.

2.4 Box Menu for Chart Radar or Radar Mode 3. AIS Disp Received msgs - Filter: All/Received/Read/Unread/ Own/Sent/Unsent - Name: R(S) yyyymmdd-hhmmss

(R -> Reception; T -> Time and date of transmission) The message list in a message category that is selected by Filter is displayed on the Name box. When a message is selected, the message will appear in the message list box.

Message Message status

Message type Set into the

"Transmit msg" when this item is checked.

Menu Outline

Sleep All Target Used to set all AIS targets to Sleep mode. Activate All Used to set all AIS targets to Activate mode.

Auto Disp Msgs

This function is used to tell AIS incoming messages automatically. When a message is received, the envelope icon above the TGT LIST icon box will inform the user of the reception of the message.

The incoming message will be displayed by clicking the envelope icon.

Received msgs

Messages received by the AIS are displayed. When this screen is selected, the MESSAGE screen will appear and Filter will be

automatically set as Received.

Incoming messages are selected by Name.

Transmit msg

A message is transmitted by the AIS. When this function is selected, the

MESSAGE screen will appear. When making transmission settings, set the check mark in the Enable changes box first.

2.4 Box Menu for Chart Radar or Radar Mode

Transmit msg

The screen that is the same as the following one will appear by selecting [Menu] ->

Safety Message.

1. When transmitting a message with the AIS, check the X Enable changes box and create a message type or message to be sent.

2. When the edition of the message to be transmitted is finished, click Send Message in the > SAFETY MESSA... menu.

Message type settings

- Addressed to MMSI, Broadcast to All - Safety Message, Binary Message - Channel A, Channel B, Channel A and B,

Don’t care of channel

Used to make MMSI settings for the destination if the message type is set to Addressed to MMSI.

Reference:

If the guidance area is set to [Edit Insert |

Info| ], the MMSI, call sign, and vessel’s name

as the target of the selected AIS will be input by selecting the AIS target and clicking the

scrollwheel.

Create Message

Used to create outgoing AIS messages

Delete Message

Used to delete the message in the Name box.

Send Message

Used to transmit created messages.

Auto Disp Msgs

Used to inform the user of incoming AIS messages with the envelope icon. Step-7 Step-6 Step-5 Step-3 Step-1 Step-2 Note:

The status of transmission is checked in the Status display. - Sent and Ack: OK

- If Sent Wait Ack -> Sent but Time

out is displayed, the transmission

of the message has failed. Transmission check

2.5 ECDIS Mode Status Bar

2.5ECDIS Mode Status Bar

The Chart Radar screen and Radar screen have the following mode status display.

2.5.1 NorthUp TM (RM)

This is used to change the chart display mode to Course up RM, North up RM, or North up TM.

2.5.2 ECDIS

This is used to change the operation mode to ECDIS, Chart Radar, or Radar. The operation mode also can be changed with Mode in the [Menu] -> Radar menu.

1 2 3 4 5 6 7

Status bar

- NorthUp TM (RM): Chart display mode - ECDIS: Mode display

- Route: Route name - UChart: User chart name - PilotData: Pilot data name - Radar: Source of radar video - Predictor: Prediction time

Status bar: Changed with the wheel. Pilot, Uchart, and route monitoring

2.5 ECDIS Mode Status Bar

2.5.3 Route

Open the Plan Route dialog box from Plan in the status bar so that the Route Plan menu will be displayed, where a route can be selected, unselected, or created.

Use the Chart Display menu to make settings for displaying or not displaying registered routes on the screen. Refer to 2.5.8 for the operation of files.

Item Description

Select Used to select and edit existing routes into new routes.

Unselect Used to unselect routes presently selected.

Create Used to create new routes. Exchange

with Monitor

Used to exchange planned routes with monitored routes.

Copy from Monitor

Used to copy monitored routes to planned routes.

Backup and Restore

Used to back up or overwrite routes on floppy disks. Report Used to generate reports on

planned routes. Full WP

Report

Used to generate detailed reports on planned routes.

Passage Plan Report

Used to generate comprehensive reports from active planned routes and active pilot data.

2.5 ECDIS Mode Status Bar