5. Datos
6.5 Cambio de movilidad postpandemia en actividades cotidianas y de ocio
Cold Sawing
Uses a slow-moving angular blade which Uses a slow-moving angular blade which pro-vides highly accurate finish-quality cuts, but in vides highly accurate finish-quality cuts, but in lower volume.
lower volume.
Cold sawing is highly accurate and is used Cold sawing is highly accurate and is used when fine length tolerances are considered.
when fine length tolerances are considered.
Milling Milling
Machining operatio
Machining operation in which metal n in which metal is removedis removed by applying power to
by applying power to a rotating cutter.a rotating cutter.
G.L. Huyett has developed proprietary G.L. Huyett has developed proprietary state-of-the-art fixtures for milling shaft keys and of-the-art fixtures for milling shaft keys and profiles.
profiles.
WOODRUFF WOODRUFF
KEYS KEYS
TIGHT TIGHT TOLERANCES TOLERANCES
FINISH FINISH CUTS CUTS
SPECIAL SPECIAL SIZES SIZES
STEP STEP KEYS KEYS
COUNTER COUNTER SINKS SINKS
SPECIAL SPECIAL SHAPES SHAPES
RADIUSED RADIUSED
ENDS ENDS
GIB GIB KEYS KEYS
CLEVIS CLEVIS PINS PINS
SHAFT SHAFT KEYS
KEYS GROOVINGGROOVING SHEARSHEAR PINS PINS
FEATHERED FEATHERED
KEYS
KEYS SPECIALSSPECIALS
Turning Turning
Machining operation in which a workpiece is Machining operation in which a workpiece is rotated while a cutting tool removes material.
rotated while a cutting tool removes material.
Huyett uses automatic bar feed equipment Huyett uses automatic bar feed equipment and off-line programming to increase and off-line programming to increase produc-tion and minimize setup time.
tion and minimize setup time.
Grinding Grinding
Machining operation in which material is Machining operation in which material is re-moved by a powered abrasive wheel, stone, belt, moved by a powered abrasive wheel, stone, belt, paste, sheet, compound, etc.
paste, sheet, compound, etc.
Grinding is used to
Grinding is used to realize fine finish toler-realize fine finish toler-ances and surface finishes.
ances and surface finishes.
Stamping Stamping
Mechanical operation that uses a tool and die Mechanical operation that uses a tool and die to form an impression in metal that is broken to form an impression in metal that is broken out in a carefully machined operation.
out in a carefully machined operation.
G.L. Huyett has developed tooling and G.L. Huyett has developed tooling and pro-cesses that yield a near
cesses that yield a near universal low cost/nouniversal low cost/no cost setup on stamping of 10,000 pieces and cost setup on stamping of 10,000 pieces and less.
less.
Laser Laser
Use of intensified beams of light to drill or cut Use of intensified beams of light to drill or cut forms into metal to finished tolerances.
forms into metal to finished tolerances.
G.L. Huyett has one of the lowest shop G.L. Huyett has one of the lowest shop ratesrates anywhere.
anywhere. Our laser Our laser department is department is equippedequipped to run even “one-off” orders for prototypes to run even “one-off” orders for prototypes and repairs.
and repairs.
PR
PROTOTOTOTYPYPES ES SPSPECECIAIALS LS STSTAMAMPIPINGNG THICKTHICK PARTS
PARTS FOFORMRMS S ADADVEVERRTITISISINGNG W
WASASHEHERS RS BEBELLLLEVEVILILLELES S SPSPECECIAIALSLS D D WASHERSWASHERS FENDERFENDER WASHERS WASHERS
Abrasive
Abrasive - Garnet, emery, carborundum, aluminium oxide, silicon carbide, diamond, cubic boron - Garnet, emery, carborundum, aluminium oxide, silicon carbide, diamond, cubic boron nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure nitride, or other material in various grit sizes used for grinding, lapping, polishing, honing, pressure blasting, and other operations.
blasting, and other operations. Each abrasive particle acts like a tinyEach abrasive particle acts like a tiny, single-point tool that cuts a, single-point tool that cuts a small chip;
small chip; with hundreds of thousands of points doing with hundreds of thousands of points doing so, high metal-removal rates are possibleso, high metal-removal rates are possible while providing a good finish.
while providing a good finish.
Abrasive band
Abrasive band - Diamond- or other abrasive-coated endless band fitted to a special band machine - Diamond- or other abrasive-coated endless band fitted to a special band machine for machining hard-to-cut materials.
for machining hard-to-cut materials.
Abrasive belt
Abrasive belt - Abrasive-coated belt used for production finishing, deburring, and similar functions. - Abrasive-coated belt used for production finishing, deburring, and similar functions.
See
See coated abrasive.coated abrasive.
Abrasive cutoff disc
Abrasive cutoff disc - Blade-like disc with abrasive particles that parts stock in a slicing motion. - Blade-like disc with abrasive particles that parts stock in a slicing motion.
Abrasive cutoff machine, saw
Abrasive cutoff machine, saw - - Machine that uses Machine that uses blade-like blade-like discs impregnated with discs impregnated with abrasiveabrasive particles to
particles to cut/part stock. cut/part stock. SeeSee saw, sawing saw, sawing machine.machine.
Abrasive flow machining
Abrasive flow machining Finishing operation for holes, Finishing operation for holes, inaccessible areas, or inaccessible areas, or restricted passages.restricted passages.
Done by clamping the
Done by clamping the part in a part in a fixture, then extruding semisolid abrasive media through the passage.fixture, then extruding semisolid abrasive media through the passage.
Often, multiple parts are loaded
Often, multiple parts are loaded into a single fixture and finisheinto a single fixture and finished simultaneously.d simultaneously.
Abrasive machining
Abrasive machining - Various grinding, honing, lapping, and polishing operations that utilize - Various grinding, honing, lapping, and polishing operations that utilize abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or abrasive particles to impart new shapes, improve finishes, and part stock by removing metal or other
other material. material. SeeSee grinding.grinding.
Abrasive-wire bandsawing
Abrasive-wire bandsawing - A variation of bandsawing that uses a small-diameter wire with - A variation of bandsawing that uses a small-diameter wire with diamond, cubic boron nitride (CBN), or aluminum-oxide abrasives bonded to the surface as the diamond, cubic boron nitride (CBN), or aluminum-oxide abrasives bonded to the surface as the cutting blade.
cutting blade. Abrasive-wire bandsawing is Abrasive-wire bandsawing is an alternative to an alternative to electrical-discharge machining forelectrical-discharge machining for product dies, stripper plates, electrodes, and cams from difficult-to -machine conductive and product dies, stripper plates, electrodes, and cams from difficult-to -machine conductive and nonconductive materials. See
nonconductive materials. See bandsawing.bandsawing.
Additive
Additive - Sulfur, chlorine, and other materials added to - Sulfur, chlorine, and other materials added to cutting fluids to improve lubricity, stabilizecutting fluids to improve lubricity, stabilize oil emulsions, and prevent
oil emulsions, and prevent chipwelding under high heat and pressure. chipwelding under high heat and pressure. SeeSee cutting fluid cutting fluid ..
Admixture
Admixture - Mixture of concentrate and water prepared to restore depleted cutting fluid to its - Mixture of concentrate and water prepared to restore depleted cutting fluid to its original state.
original state.
Angle plate
Angle plate - Solid adjustable or nonadjustable plate that holds work at a precise angle to the - Solid adjustable or nonadjustable plate that holds work at a precise angle to the spindle during milling and
spindle during milling and grinding. grinding. Also used for other Also used for other cutting operations and for inspection.cutting operations and for inspection.
Arbor
Arbor - Shaft used - Shaft used for rotary support in machining applications. for rotary support in machining applications. In grinding, the spindle for mountingIn grinding, the spindle for mounting the wheel;
the wheel; in milling and other cutting operations, the shaft for mounting the in milling and other cutting operations, the shaft for mounting the cutter.cutter.
Assembly
Assembly - Joining together two or more parts to complete a structure. - Joining together two or more parts to complete a structure.
Automatic bar machine
Automatic bar machine - - Production machine for turning bar Production machine for turning bar stock. stock. Similar to Similar to an automatican automatic chucking machine except that stock size is limited to through-the-spindle capacity and work is held chucking machine except that stock size is limited to through-the-spindle capacity and work is held