Rear-Panel Status Colors. . . A-1 Identity Dialog. . . A-2 Device Summary Dialog . . . A-2 Network T1 Health and Status Dialog. . . A-3 DTE T1 Health and Status Dialog. . . A-3 Data Ports Health and Status Dialog . . . A-4 Network T1 Performance Statistics Dialog. . . A-5 Channel Configuration Dialog . . . A-6 Copy Device Configuration Area Dialog . . . A-6 Network T1 Configuration Dialog . . . A-7 DTE T1 Configuration Dialog. . . A-7 Data Ports Configuration Dialog. . . A-8 Network T1 Loopback Modes and Pattern Tests. . . A-9 DTE T1 Loopback Modes. . . A-10 Data Ports Loopback Modes and Pattern Tests . . . A-10 Proxied Device and Proxied NMS Dialogs . . . A-11 Device Health and Status Display . . . A-11 Device Call Directory Display . . . A-11 Device Identity Display. . . A-12 NMS System Features Display . . . A-13 NMS Administration Display . . . A-13 Device Administration Display . . . A-14 Device Circuit Quality. . . A-15 Device Commands . . . A-17 Device EIA Status Display . . . A-18 Device External Leads Display . . . A-18 Device Loopback Modes and Pattern Tests. . . A-19 Device Test Display. . . A-20
Overview
This appendix lists the MIB objects that the DCE Manager uses to generate the fields that appear in its dialogs and displays. The first part of the chapter discusses the dialogs of 3100 Series devices; the second part discusses the displays of the proxy agent and proxied devices.
3100 Series Devices Dialogs
This sections describes the MIB objects related to 3100 Series devices that the DCE Manager reads and writes using the SNMP Get and Set commands.
Rear-Panel Status Colors
The MIB II Interface Group object ifOperStatus is used to generate the rear-panel status colors (see Chapter 1).
A
Identity Dialog
Table A-1 shows the MIB objects used to generate the Identity Dialog (see Chapter 4).
Table A-1
3100 Series Device Identity
Field MIB Object MIB
Description: sysDescr MIB II – System Group
Model: sysDescr MIB II – System Group
Software Release: sysDescr MIB II – System Group
Hardware CCA1: sysDescr MIB II – System Group
Hardware CCA2: sysDescr MIB II – System Group
Serial Number: sysDescr MIB II – System Group
Up Time: sysUpTime MIB II – System Group
Contact: sysContact MIB II – System Group
Name: sysName MIB II – System Group
Hostname: HP OpenView generated n/a
Location: sysLocation MIB II – System Group
Network T1 Description: ifDescr (of Network T1 interface) MIB II – Interface Group DTE T1 Description: ifDescr (of DTE T1 interface) MIB II – Interface Group Port <n> Description: ifDescr (of Port <n> interface) MIB II – Interface Group COM Description: ifDescr (of COM interface) MIB II – Interface Group MODEM Description: ifDescr (of MODEM interface) MIB II – Interface Group
Device Summary Dialog
The MIB object ifOperStatus is used to generate the fields of the device summary Health and Status Dialog (see Chapter 3).
Network T1 Health and Status Dialog
Table A-2 shows the MIB objects used to generate the Network T1 Health and Status Dialog (see Chapter 3).
Table A-2
Network T1 Health and Status Dialog
Field MIB Object MIB
Operational Status: ifOperStatus MIB II – Interface Group Line Status: dsx1LineStatus DS1/E1 MIB – Near End Group Loopback Status: dsx1LoopbackConfig DS1/E1 MIB – Near End Group Send Code Status: dsx1SendCode DS1/E1 MIB – Near End Group Monitor Status: ifExtnsTestType Generic Interface MIB Extension –
Generic Interface Test Table Test Result: ifExtnsTestResult Generic Interface MIB Extension –
Generic Interface Test Table Test Code: ifExtnsTestCode Generic Interface MIB Extension –
Generic Interface Test Table
DTE T1 Health and Status Dialog
Table A-3 shows the MIB objects used to generate the DTE T1 Health and Status Dialog (see Chapter 3).
Table A-3
DTE T1 Health and Status Dialog
Field MIB Object MIB
Operational Status: ifOperStatus MIB II – System Group
Line Status: dsx1LineStatus DS1/E1 MIB – Near End
Loopback Status: dsx1LoopbackConfig DS1/E1 MIB – Near End Group
Data Ports Health and Status Dialog
Table A-4 shows the MIB objects used to generate the Data Ports Health and Status Dialog (see Chapter 3).
Table A-4
Data Ports 1– 4 Health and Status Dialog
Field MIB Object MIB
Operational Status: ifOperStatus MIB II – System Group
Test Status: ifExtnsTestType Generic Interface MIB Extension – Generic Interface Test Table Test Result: ifExtnsTestResult Generic Interface MIB Extension –
Generic Interface Test Table
Test Code: ifExtnsTestCode Generic Interface MIB Extension –
Generic Interface Test Table
DTR: rs232InSigState
(rs232InSigName == dtr)
RS 232-like MIB – Input Signal Table
CTS: rs232OutSigState
(rs232OutSigName == cts)
RS 232-like MIB – Output Signal Table
RTS: rs232InSigState
(rs232InSigName == rts)
RS 232-like MIB – Output Signal Table
DSR: rs232OutSigState
(rs232OutSigName == dsr)
RS 232-like MIB – Output Signal Table
Network T1 Performance Statistics Dialog
Table A-5 shows the MIB objects used to generate the Network T1 Performance Statistics Dialog (see Chapter 3).
Table A-5
Network T1 Performance Statistics Dialog
Field MIB Object MIB
Time Elapsed: dsx1TimeElapsed DS1/E1 MIB – Near End Group
Valid Intervals: dsx1ValidIntervals DS1/E1 MIB – Near End Group
Current Interval:
DS1/E1 MIB – Near End Group
Beginning Interval dsx1IntervalNumber = 1–96 DS1/E1 MIB – Near End Group Ending Interval dsx1IntervalNumber = 1–96 DS1/E1 MIB – Near End Group 15 Min Interval:
DS1/E1 MIB – Near End Group
Total: 24 Hours
DS1/E1 MIB – Near End Group
Channel Configuration Dialog
Table A-6 shows the MIB objects used to generate the Channel Configuration Dialog (see Chapter 4).
Table A-6
3100 Series Device Channel Configuration
Field MIB Object MIB
Network T1 Channels:
1 2 3. . .22 23 24
dsx1FracTable (for T1 interface)
DS1/E1 MIB – Fractional Group
DTE T1 Channels:
1 2 3. . .22 23 24
dsx1FracTable (for DTE T1 interface)
DS1/E1 MIB – Fractional Group
Copy Device Configuration Area Dialog
Table A-7 shows the MIB objects used to generate the Copy Device Configuration Area Dialog (see Chapter 4).
Table A-7
3100 Series Device User Configuration
Field MIB Object MIB
User Configuration: devConfigAreaCopy ATTDCE MIB
Network T1 Configuration Dialog
Table A-8 shows the MIB objects used to generate the Network T1 Configuration Dialog (see Chapter 4).
Table A-8
Network T1 Configuration
Field MIB Object MIB
Interface Type: ifType MIB II – Interface Group
Speed (bps): ifSpeed MIB II – Interface Group
Framing: dsx1LineType DS1/E1 MIB – Near End Group
Line Coding: dsx1LineCoding DS1/E1 MIB – Near End Group
Circuit: dsx1CircuitIdentifier DS1/E1 MIB – Near End Group
Signal Mode: dsx1SignalMode DS1/E1 MIB – Near End Group
Tx Clock Source: dsx1TransmitClockSource DS1/E1 MIB – Near End Group
Facilities Data Link: dsx1Fdl DS1/E1 MIB – Near End Group
DTE T1 Configuration Dialog
Table A-9 shows the MIB objects used to generate the DTE T1 Configuration Dialog (see Chapter 4).
Table A-9 DTE T1 Configuration
Field MIB Object MIB
Interface Type: ifType MIB II – Interface Group
Speed (bps): ifSpeed MIB II – Interface Group
Framing: dsx1LineType DS1/E1 MIB – Near End Group
Line Coding: dsx1LineCoding DS1/E1 MIB – Near End Group
Signal Mode: dsx1SignalMode DS1/E1 MIB – Near End Group
Tx Clock Source: dsx1TransmitClockSource DS1/E1 MIB – Near End Group
Facilities Data Link: dsx1Fdl DS1/E1 MIB – Near End Group
Data Ports Configuration Dialog
Table A-10 shows the MIB objects used to generate the Data Ports Configuration Dialog (see Chapter 4).
Table A-10
Data Ports 1– 4 Configuration
Field MIB Object MIB
Interface Type: ifType MIB II – Interface Group
Speed (bps): ifSpeed MIB II – Interface Group
Port Type: rs232PortType RS 232-like MIB –
Generic Port Table Clock Source: rs232SyncPortClockSource RS 232-like MIB –
Synchronous Port Table
Network T1 Loopback Modes and Pattern Tests
Table A-11 shows the MIB objects that are set when you select loopback modes and pattern tests (see Chapter 5).
Table A-11
Network T1 Loopback Modes and Pattern Tests
Menu Item
Set dsx1SendCode (DS1/E1 MIB – Near
End Group) to:
Set
dsx1LoopbackConfig (DS1/E1 MIB – Near
End Group) to:
Set ifExtnsTestType (Generic Interface
MIB – Generic Interface Test
Table) to:
Remote Loopback –> Send LLB Up Code
dsx1SendLineCode
Remote Loopback –> Send LLB
Down Code dsx1SendResetCode
Loopback –> Abort dsx1NoLoop
Loopback –> Start Line Loopback
dsx1LineLoop
Loopback –> Start Payload Loopback
dsx1PayloadLoop
Patterns –> Abort Send dsx1SendNoCode Patterns –> Send QRSS
Pattern
dsx1SendQRS
Patterns –> Send 1 in 8 dsx1SendOtherTestPattern
Patterns –> Abort Monitor noTest
Patterns –> Monitor QRSS Pattern
testMonQRSS
DTE T1 Loopback Modes
Table A-12 shows the MIB objects that are set when you select a loopback mode (see Chapter 5).
Table A-12
DTE T1 Loopback Modes
Menu Item Set dsx1LoopbackConfig (DS1/E1 MIB – Near End Group) to:
Loopback –> Abort dsx1Noloop
Loopback –> Start DTE Loopback dsx1LineLoop Loopback –> Start Repeater Loopback dsx1PayloadLoop
Data Ports Loopback Modes and Pattern Tests
Table A-13 shows the MIB objects that are set when you select loopback modes and pattern tests (see Chapter 5).
Table A-13
Data Ports 1– 4 Loopback Modes and Pattern Tests
Menu Item Set ifExtnsTestType (Generic Interface MIB – Generic Interface Test Table) to:
Remote Loopback –> Send V.54 Up Code testSendV54Up Remote Loopback –> Send V.54 Down Code testSendV54Down Remote Loopback –> Send FT1 Up Code testSendFT1Up Remote Loopback –> Send FT1 Down Code testSendFT1Down
Loopback –> Abort noTest
Loopback –> Start Data Channel Loopback testFullDuplexLoopBack Loopback –> Start Data Terminal Loopback testLoopDTLB
Patterns –> Abort Send noTest
Patterns –> Send QRSS Pattern testSendQRSS Patterns –> Send 511 Pattern testSend511
Patterns –> Abort Monitor noTest