4.2. PRUEBA DE HIPÓTESIS
4.2.2. Contrastación de hipótesis
For setting parameters for programming, the grid type editor or the card type editor will be displayed.
Grid type editor
If the selected module is a grid type, such as PLU and Employee, grid type editor will open. From the grid type editor, you can open card type editor by double-click at the target No. column.
When arrows appear at the bottom of window, it means there are more programming items.
1.
If necessary, click [New] to create new data. Default parameters are automatically set.2.
Set parameters. Please refer to “For the parameter settings” described later.3.
Click [OK] to complete settings. The confirmation window will appear to ask you if you want to save the change. Click [YES] to save, [NO] to cancel new settings, or [CANCEL] to return to the32
Card type editor
If the selected option is not a record type, card type editor will open.
To display a card type editor window, double-click the No. column in the grid type editor.
When arrows appear at the tab area it means there are more programming items.
Tab Programming item information
1.
Click a target tab, its programming items will appear.2.
Set parameters. Please refer to “For the parameter settings” described later.3.
Repeat the steps 1 and 2 for the tabs you want to set.4.
Click [OK] to complete settings. When the module has the grid type editor, the machine returns to the editor. When not, the machine shows the confirmation window to ask you if you save the change. Click [YES] to save, [NO] to cancel new settings, or [CANCEL] to return to the setting window returns to the command selection window.To cancel setting, click [CANCEL].
To view or print the programming setting, click [View] or [Print]. For more information about viewing/printing programming setting, please refer to the “Viewing/Printing programming settings”
section.
NOTE
In this manual, tab names are indicated at the columns of Category in the programming lists.
For the parameter settings
Basic operational method to enter or selecting parameters are explained below.
• How the cursor moves
Basically you can move the cursor using the arrow key, while the following key operations result in moving cursor.
Home; to the beginning of a line
Ctrl+Home; to the beginning of the grid
• How to select cells
An area of a parameter is called a cell. To enter or select parameters, firstly you must select the cells.
You can select a cell and multiple cells as follows:
To select a single cell: Move the arrow key to the target cell, and click the cell.
To move the next (up/down/next/previous) cell, press the corresponding arrow key.
To select a range of cells: Move the arrow key to the first cell of the target range, and click the cell, then drag to the last cell or hold down the Shift key and click the last cell in the range.
To select an entire row: Click the row heading.
To select an entire column: Click the column heading.
• How to enter or select a parameter on a cell To edit a parameter, double-click the target cell first.
For setting parameters, you have three kinds of cell types; alphanumeric entry type, item selection type and color selection type.
For entering alphanumeric characters
Enter alphanumeric characters using the keyboard. You can use the following keys for entry.
Alphanumeric keys: To enter alphanumeric characters Left/Right keys: To move character cursor Insert key: To insert characters Delete/Backspace key: To delete one character
Esc: To exit cell entry operation without changing data Tab/Shift+Tab: To exit cell entry operation with changing data Enter/Shift+Enter: To exit cell entry operation with changing data For selecting items
In the cell, a drop menu button is shown. Click the cell, the drop menu will open. Then select a parameter.
34
How to display the card type editor window
Double-click the leftmost column of the target (No. column).
• How to edit parameters in the grid type editor
You can use the following commands in the Edit menu for editing parameters. Also the same commands can be executed by using command buttons appeared on the screen. For details, please refer to the following page.
Delete To delete a parameters on the selected cell
You can also execute a deletion by pressing the Delete key.
Copy To copy the selected cell
You can copy a cell to multiple cells, while you cannot copy to a different row in the combo meal setting.
You can also execute a copy by pressing Ctrl + Insert keys.
Paste To paste copied parameters at the selected cells
You can also execute a paste by pressing Shift + Insert keys.
Find To find a target cell.
• Changing a column width
Drag the boundary on the right side of the column heading until the column has the width you want.
• Specifying the cursor behavior
Selecting Cursor behavior from Tool menu allows you to specify how the cursor moves when Enter key is pressed; up, down, right and left.
• Creating new data with range specification
Selecting Range in File menu allows you to make a range setting for new data.
(The command button displayed on the screen operates the same function.)
• Sorting rows based on the contents of one column
Select a column you want to sort by, and select Tools, Sort and Ascending/Descending in this order.
When you open each menu, some of the following command buttons may appear for easier setting as shown in the following sample screen. Please refer below for the function of each button, and click a desirable button when necessary.
OK To save the data you edited. When the select [OK], the confirmation window will open.
Select [YES] to save. The setting screen will close after saving the data. Select [NO] to delete the change. Select [CANCEL] to cancel.
CANCEL To cancel the data you edited. When you select [CANCEL], the confirmation window will open. Select [YES] to delete the change. The screen will close without saving the data you edited. Select [NO] to return to the screen.
View To view the settings. Please refer to Viewing/Printing programming settings section.
Print To print the settings. Please refer to Viewing/Printing programming settings section.
Undo To cancel the entry you just entered.
Redo To cancel “Undo”.
36
Range To make a range settings for department, PLU and dynamic PLU settings. New data is created. *1
New To create a new data, such as to create a new PLU code.
Del To delete the selected data. Click the No. column of the target PLU to delete entire data of the line.
NEXT PLU BLOCK To display next 1000 PLUs. The details are described in the section PLU.
*1 When you select “Range”, the following window will open. Enter start code and end code using the keyboard connected to your POS server, and click [OK]. To cancel, click [CANCEL].
In the Card Type editor, the icon [PLU SELECT] will be displayed at a parameter cell to prompt you select a PLU. When you select “PLU Select”, the following window will open.
Enter a part of PLU name at the column of Search Text, and click Search.
To find a PLU by PLU Menu, click the arrow at PLU Menu column, and click Search.
In case not specifying a PLU, click Not Specified.
To chancel, click Cancel.