Dar y recibir retroalimentación Autorreflexión permanente
PARA CONVERTIR LA ALEGRÍA EN HÁBITO Pensar siempre en positivo, no
Current BIOS information Set a schedule for
the BIOS Update download Click to check for a new BIOS update available for download Click to cancel the download schedule setting Click to apply the download schedule setting
To download the updated BIOS:
1. From the USB BIOS Flashback screen, click Check for New BIOS Update. Wait for the system to check the latest BIOS version.
ASUS Z87-PRO 4-7
Chapter 4
2. After the utility detects a new BIOS, click from the Save to: field, select the USB flash drive, then click Download.
Chapter 4
4.3.4
Ai Charger+
Ai Charger+ allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**.
Launching Ai Charger+
To launch Ai Charger+, click on the top edge of the screen, then click Ai Charger+ on
the AI Suite 3 main menu bar.
Tick to enable or
disable Ai Charger+ Tick to apply the selection
Ai Charger+ screen
• �� Check the manufacturer if your USB device is a Battery Charging Specification 1.1�� Check the manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device.
• ���� Actual charging speeds may vary depending on the charging rate and specifications of your USB device.
• To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+.
• The Ai Charger+ does not support USB hubs/ extension cables and generic USB cables.
ASUS Z87-PRO 4-9
Chapter 4
4.3.5
EZ Update
EZ Update is a utility that allows you to automatically update your motherboard’s softwares, drivers and the BIOS version easily.
With this utlity, you can also manually update the BIOS and select the boot logo that will display during POST.
Launching EZ Update
To launch EZ Update, click on the top edge of the screen, then click EZ Update on the
AI Suite 3 main menu bar.
EZ Update screen
Click to automatically update your motherboard’s driver, software and firmware
Click to search and
Chapter 4
4.3.6
Network iControl
Network iControl is a one-stop setup network control center that allows you to manage your network bandwidth and set the bandwidth priority for your running programs.
Launching Network iControl
To launch Network iControl, click on the top edge of the screen, then click Network iControl on the AI Suite 3 main menu bar.
• Ensure to install the LAN drivers before using this utility. • Network iControl can only support the onboard LAN. EZ Start screen
Click to activate Network iControl
Tick to enable the selected profile Click to select
a profile
Click to apply the changes made EZ Profile screen Tick to assign a schedule of your network programs to avoid network congestions Click to save the profile
settings or rename the profile
Select a program from this list and click to add to your network profile Click to select a network profile Click to set the
program as High, Normal, or Low priority
ASUS Z87-PRO 4-11
Chapter 4
4.3.7
USB Charger+
USB Charger+ allows you to quick-charge your portable USB devices even if your computer is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced >
APM > ErP Ready in the Advanced mode of the BIOS Setup program.
Launching USB Charger+
To launch USB Charger+, click on the top edge of the screen, then click USB Charger+
on the AI Suite 3 main menu bar.
USB Charger+ screen
Click to detect the connected USB device Click to apply the settings Click to discard the settings Click to fast- charge your USB device Indicates that the connected USB device is in charging mode Click to stop charging your USB device
Click to select the type of USB device that you wish to charge when the system is off
Ensure to connect your USB device into the USB port that supports this utility. Refer to section 2.3.1 Rear I/O connection of your user manual for more details.
• The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables.
Chapter 4
4.3.8
System Information
This utility allows you get the detailed information of the motherboard, CPU, and memory settings.
Launching the System Information
To launch System Information, click on the top edge of the screen, then click System Information on the AI Suite 3 main menu bar.
Viewing the motherboard information
From the System Information screen, click MB tab to view the motherboard’s information.
Viewing the CPU information
ASUS Z87-PRO 4-13
Chapter 4
Viewing the SPD information
From the System Information screen, click SPD tab to view the memory’s information.
4.3.�
Audio configurations
The Realtek® audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ®
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors, and giving users plug and play convenience.
Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that
came with the motherboard package.
If the Realtek® audio software is correctly installed, you will find the
Realtek® HD Audio Manager icon on the taskbar. Double-click on
the icon to display the Realtek® HD Audio Manager.
Chapter 4
A. Realtek® HD Audio Manager with DTS UltraPC II for Windows® 8 /
Windows® 7
Configuration option tabs (vary with the audio devices connected) Advanced settings
Set default device
Control settings panel
Analog and digital connector status
This version of Realtek HD Audio Manager supports Intel® 8 Series motherboards and other selected models.
ASUS Z87-PRO 4-15
Chapter 4
• Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration.
• To play Blu-Ray™ disc, make sure to use an HDCP compliant monitor.To play Blu-Ray™ disc, make sure to use an HDCP compliant monitor.
B. Realtek® HD Audio Manager with DTS UltraPC II for Windows® 8 /
Windows® 7
Control settings
Configuration option tabs (vary with the audio devices connected)
Advanced settings Information
Connector settings Analog and digital connector status
Click to set default device
Click to exit Click to minimize
To launch Realtek® HD Audio Manager, click from the taskbar then double-click .
To display Quick Volume Adjustment Bar, click from the taskbar then click .
Click to set default communication device
ASUS Z87-PRO 5-1