A.S. Degree and
Certificates of Achievement
Industry and Technology Division www.elcamino.edu/academics/indtech
By completing the degree or certificate requirements, students acquire proficiency in basic residential construction techniques and in analyzing, evaluating, and providing solutions for a variety of job site situations. Students will be able to interpret blueprints, estimate materials, lay out, and construct a basic residential structure in accordance with Uniform Building Code requirements. Competencies are assessed regularly by student performance in the construction technology laboratory. The program provides career opportunities in various aspects of construction, including carpentry, cabinetmaking, furniture making, a variety of subcrafts, and contracting. Completion of the degree or certificate requirements qualifies students to receive a maximum of two years credit applicable toward the California State Contractor’s License Board experience requirement.
Major Requirements
At least 50% of the major requirements for the Associate in Science degree must be completed at El Camino College.
Cabinet and Fine Woodworking Option:
Construction Technology 200, 201, 202, 203, 210, 211, 212, 213, 220, 221
Total Units: 19
Recommended Electives: Architecture 150A, Business 17, Computer Aided Design/Drafting 5, Computer Information Systems 13, Construction Technology 95abcd (2-4 units), 100, 110
Construction Technology Option:
Construction Technology 100, 110, 172, 180, 200; complete 16 units from: Architecture 179, Construction Technology 121, 122, 131, 132, 141, 142, 150, 160, 201, 202, 203
Total Units: 34
Recommended Electives: Architecture 150A, Business 17, Computer Information Systems 13, Construction Technology 95abcd
Certificates of Achievement
A Certificate of Achievement will be granted upon completion of all program requirements. At least 50% of the courses for the Certificate of Achievement must be completed at El Camino College.
Construction Technology:
Construction Technology 100, 110, 172, 180, 200; complete 16 units from: Architecture 179, Construction Technology 121, 122, 131, 132, 141, 142, 150, 160, 95abcd* (* 2-4 units), 201, 202, 203
Total Units: 34
Cabinet and Fine Woodworking:
Construction Technology 200, 201, 202, 203, 210, 211, 212, 213, 220, 221
Total Units: 19
For Gainful Employment program information, please visit www.elcamino.edu/academics/indtech/constructiontech
Courses
Construction Technology 95abcd
Cooperative Work Experience Education
2-4 units; hours to be arranged
Enrollment Limitation: Employment or volunteer work in a position related to the student’s major or career goal by the second week of the semester. Completion of or current enrollment in one course from the major.
Credit, degree applicable Transfer CSU – limitations apply
Through a set of learning objectives established by the student, supervisor, and instructor, each student will work with and learn from experts in the Construction Technology field. These experiences will enable students to improve job skills, analyze career opportunities and requirements, and compare them to personal abilities and career expectations.
Note: The total units earned for CWEE may not exceed 16 units.
Construction Technology 99
(formerly Construction Technology 99abc)
Independent Study
1-3 units; hours to be arranged
Enrollment Limitation: two courses in Construction Technol- ogy with a minimum grade of B in each and acknowledg- ment by the instructor with whom the student will work Credit, degree applicable
Transfer CSU – limitations apply
This course provides special advanced studies in a subject field of Construction Technology not covered in the regular departmental offerings. Regular conferences with the instructor are coordinated with assigned Construction Technology projects (54 hours per unit).
Note: For eligibility requirements, go to www.elcamino.edu/admissions/credit.asp
Construction Technology 100
Building Fundamentals
4 units; 2.5 hours lecture, 5 hours lab Credit, degree applicable
Transfer CSU
This course is an introduction to the fundamentals of the building trades. Topics of instruction include: building codes, construction mathematics, rough framing, and technical information on materials and methods of residential construction. Practical instruction is given in the use of tools and materials through construction laboratory work.
Construction Technology 110
Additions and Remodeling
4 units; 2.5 hours lecture, 5 hours lab Credit, degree applicable
Transfer CSU
This course is an introduction to the fundamentals of residential remodeling and additions. Instruction includes: planning and design, permit process, blueprint reading, and building codes. Practical instruction is given in the use of tools and materials through construction laboratory work.
Construction Technology 121
Concrete and Formwork
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering concrete and formwork. Topics of instruction include the International Residential Code (IRC) requirements, construction mathematics, house layout, blueprint reading, formwork, use of leveling instruments and estimating. Practical instruction is given in the use of tools and materials through construction laboratory work.
Construction Technology 122
Rough Framing
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering rough framing. Topics of instruction include materials and methods of residential rough frame construction, rough lumber estimating and International Residential Code (IRC) requirements. Practical instruction is given in the use of tools and materials through construction laboratory work.
Construction Technology 131
Roof Framing
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering residential roof framing. Topics of instruction include roof structures, calculation and layout of various rafters, International Residential Code (IRC) requirements, roof construction and estimating. Practical instruction is given in the use of tools and materials through construction laboratory work.
Construction Technology 132
Stair Framing
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering residential stair framing. Topics of instruction include stair design, calculations, layout and construction. Practical instruction is given in the use of tools and materials through construction laboratory work.
Courses
Construction Technology 141
Interior Subcrafts
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering interior subcrafts. Topics of instruction include door hanging, drywall installation and finishing, ceramic tile setting, International Residential Code (IRC), and estimating. Practical instruction is provided in the use of tools and materials through construction laboratory work.
Construction Technology 142
Exterior Subcrafts
4 units; 2.5 hours lecture, 5 hours lab
Prerequisite: Construction Technology 100 or 110 with a minimum grade of C in prerequisite or equivalent Credit, degree applicable
Transfer CSU
This is an advanced course in construction technology, covering exterior subcrafts. Topics of instruction include window installation, exterior lath, stucco application and texturing, siding, concrete blocks, International Residential Code (IRC), and estimating. Practical instruction is provided in the use of tools and materials through construction laboratory work.
Construction Technology 150
Contract Estimating
3 units; 3 hours lecture
Recommended Preparation: completion of 12 units of Con- struction Technology or a minimum of 3 years of construc- tion work experience
Credit, degree applicable Transfer CSU
This course is designed for those with construction backgrounds who desire to advance to a supervisory position or become contractors. Topics include: blueprint reading, International Building Code (IBC) requirements, quantity surveying and estimating, and basic financial statements.
Construction Technology 160
Business and Legal Aspects of Contracting
3 units; 3 hours lecture
Recommended Preparation: completion of 12 units of Con- struction Technology or a minimum of 3 years of construc- tion work experience
Credit, degree applicable Transfer CSU
This course is designed for those with construction backgrounds who desire to advance to a supervisory position or become contractors. Topics include: legal and business aspects of a contracting organization, Contractor’s License Law, Lien Laws, labor code, payroll deductions, business organization and planning, and management principles.
Construction Technology 172
Residential Electrical Wiring
4 units; 2.5 hours lecture, 5 hours lab Credit, degree applicable
Transfer CSU
This course focuses on residential electrical wiring in accordance with the National Electric Code (NEC). Topics covered include blueprint reading, developing wiring diagrams, wiring, grounding and placement of lights, switches, receptacles and fixtures. The proper selection and use of conduits, determination of branch circuit requirements, proper selection of circuit breakers and the installation of service entrance and sub-panels are also covered. The techniques of electrical wiring are learned through construction laboratory work which requires use of standard electrical tools and materials.
Construction Technology 180
Residential Plumbing
4 units; 2.5 hours lecture, 5 hours lab Credit, degree applicable
Transfer CSU
This course explores the layout and fabrication techniques needed to erect a water and waste plumbing system for a residence. Students apply appropriate methods and procedures by selecting proper size pipes, fittings, fixtures and accessories and install and test various fixtures and systems. Other topics include the diagnosing, troubleshooting and clearing of stoppages in a plumbing system.
Construction Technology 200
General Cabinet Making
2 units; 1 hour lecture, 3 hours lab Credit, degree applicable Transfer CSU
This course is one in a series of courses designed for students to develop a solid background in the fundamentals of woodworking technology. Students will learn to operate stationary woodworking equipment, hand held power tools and sanding equipment safely. Topics include lumber characteristics, gluing and clamping techniques, filing and chiseling, and fasteners. Students will fabricate free standing woodworking projects.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 201
Upper Residential Cabinets
2 units; 1 hour lecture, 3 hours lab Credit, degree applicable Transfer CSU
This course is one in a series of courses designed for students to develop a solid background in the fundamentals of woodworking technology. Topics covered include properties of wood and wood products, and the fabrication and installation of upper residential cabinets. Students will learn construction techniques and the multiple support systems used to attach wall or ceiling mounted cabinets.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Courses
Construction Technology 202
Base Residential Cabinets
2 units; 1 hour lecture, 3 hours lab Credit, degree applicable Transfer CSU
This course is one in a series of courses designed for students to develop a solid background in the fundamentals of woodworking technology. Topics covered include properties of wood and wood products, and the fabrication and installation of base residential cabinets. Students will learn correct construction techniques for load bearing cabinets, appropriate use of toe kicks, and use of sub tops for multiple types of counter top materials.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 203
Dedicated Use Cabinets
2 units; 1 hour lecture, 3 hours lab Credit, degree applicable Transfer CSU
This course is one in a series of courses designed for students to develop a solid background in the fundamentals of woodworking technology. Topics covered include properties of wood products, and fabrication and installation of residential dedicated use cabinets. Students will learn correct construction techniques for specialty cabinets such as built in oven, appliance garage, pantry, and wine storage.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 210
Furniture Making Laboratory - Interpreting Commercial Plans
1.5 units; 4.5 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is one in a series of courses that will give students the opportunity to develop problem solving advanced skills in the design and fabrication of furniture with an emphasis on interpreting commercial plans. Students will learn how to read and understand furniture construction plans. Topics will include the meaning of symbols and calculations, reading dimensions, and verifying accuracy of stacked dimensions in relationship to the overall dimension. Students will produce a furniture piece without any deviation from the original plans.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 211
Furniture Making Laboratory - Plan Modifications
1.5 units; 4.5 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is one in a series of courses that will give students the opportunity to develop advanced problem solving skills in the design and fabrication of furniture with an emphasis on plan modification. Students will learn how to modify an existing plan. Topics will include using Golden Mean for proper proportion, ergonomics, joinery and construction techniques to achieve a finished piece to the student’s specific needs.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 212
Furniture Making Laboratory - Developing Original Plans
1.5 units; 4.5 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is one in a series of courses that will give students the opportunity to develop problem solving advanced skills in the design and fabrication of furniture with an emphasis on developing original detailed plans. Students will create, draw and construct their own furniture design. Topics will require creating Bill of Materials, Plan of Procedure and wood and fastener selection.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 213
Furniture Making Laboratory - Building without Plans
1.5 units; 4.5 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is one in a series of courses structured as a problem-solving approach to furniture making with an emphasis on building without plans. Abandoning formal detailed plans, students will use thumbnail sketching techniques to create a furniture design. Thumbnail sketches will be used to create a full size drawing detailing joinery and using coloring techniques to emphasize wood contrasts. Taking measurements directly from full size drawings and referencing joinery details, students will fabricate a furniture piece.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
______________________________________________ The hours per week of courses may be
adjusted based on the length of the term. ______________________________________________
Courses
Construction Technology 220
Hinging Systems and Doors
2.5 units; 1.5 hours lecture, 3 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is the study of the principles and operation of hinge mortising and insertion machine (eco-press). Topics include working with hinges, hinging plates, appropriate door construction and installation.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.
Construction Technology 221
Drawer Systems
2.5 units; 1.5 hours lecture, 3 hours lab
Prerequisite: Construction Technology 200 or 201 or 202 or 203 with a minimum grade of C or concurrent enrollment Credit, degree applicable
Transfer CSU
This course is the study of dimensioning and fabrication of drawer boxes, use and installation of slide systems, and commercial jigs and installation tools.
Note: Four years of journey-level experience is required to be eligible to take the California State Contractor’s License for C-6 Cabinet, Millwork and Finish Carpentry examination. Credit toward the four-year requirement is given for construction technology courses.