Efecto del escarabajo estercolero Frickius Variolosus sobre el reciclaje de nutrientes

5.5 FoFormrmatattiting tng the Hhe HDDDD

If you have replaced the HDD, you must reformat it and download the system software If you have replaced the HDD, you must reformat it and download the system software and RUI to the newly formatted HDD.

and RUI to the newly formatted HDD.

5.5.1

5.5.1 MaMakiking ng CoConnnnecectitiononss

5.5.

5.5.22 FFoorrmmaattttiinngg

1)

1) SelecSelect [t [NexNext] t] undunder er [Do[Downlownload/Uad/Uploapload].d].

F05-505-01

F05-505-01

2)

2) SelSelect [Hect [HD ForD Formatmat], and se], and seleclect [Cont [Connenect]ct]..

F05-505-02

F05-505-02

3)

3) If the nIf the notation otation in the in the upper riupper right of ght of the screen the screen indicates indicates standard standard mode, gmode, go to o to step 5); step 5); if if  it indicates low-speed mode, on the other hand, go to step 4).

4)

4) Press [SPress [Switch Mowitch Mode] to bride] to bring up the Cenng up the Centrontronics Comics Combinabination Motion Mode Switcde Switch-Ovh-Overer screen. Select [Standard Mode], and

screen. Select [Standard Mode], and select [OK]. Select select [OK]. Select [T[To Return Unit Select o Return Unit Select Screen],Screen], and go back to step 2) to start over.

and go back to step 2) to start over.

F05-505-04

F05-505-04

5)

6)

6) WheWhen the connn the connectioection is compln is completed, theted, the folloe following scwing screen appreen appears. Selears. Select [OK].ect [OK].

F05-505-06

F05-505-06

7)

8)

8) When When the Stathe Start Conrt Confirmfirmatioation scren screen has aen has appeappeared, sered, select [Slect [Start].tart].

F05-505-08

F05-505-08

9)

10)

10) When formattinWhen formatting has been completedg has been completed, a message will appear to that effe, a message will appear to that effect; select [OK].ct; select [OK].

F05-505-10

F05-505-10

11)

11) A screen will appear asking you if you want to continue and doA screen will appear asking you if you want to continue and download the system soft-wnload the system soft- ware: if the

ware: if the host machine is a host machine is a copier model, select [Download the System Software] tocopier model, select [Download the System Software] to start downloading. If a RIP1 PCB is installed, go to the Model and Unit Select screen, start downloading. If a RIP1 PCB is installed, go to the Model and Unit Select screen, and select [iR5000N].

12)

12) When the system softwaWhen the system software has been downloadre has been downloaded, a screen will appear asking you if youed, a screen will appear asking you if you want to download the RUI. If you do, select [Download RUI].

want to download the RUI. If you do, select [Download RUI].

To end, make the following selections: Previous Screen>Select Unit Select To end, make the following selections: Previous Screen>Select Unit Select Screen>OK>To Return Main Menu>End Service Support Tool.

Screen>OK>To Return Main Menu>End Service Support Tool.

F05-505-12

F05-505-12

5.5.3

5.5.3 PPointoints ts to No Note ote on on FormFormattatting ing the the HDDHDD

1:

1: Be sure to dBe sure to downloownload the systead the system software whm software whenevenever you haer you have formave formatted thetted the hard disk. Turning on the power without downloading the system software hard disk. Turning on the power without downloading the system software will lead to

will lead to an error (E602-0002).an error (E602-0002). 2:

2: When yoWhen you turn ou turn on the pn the power foower for the fr the first time after irst time after you hayou have inve installed thestalled the system software following the formatting of the hard disk, a faulty image system software following the formatting of the hard disk, a faulty image may appear on the control panel. The fact does not indicate a fault in the may appear on the control panel. The fact does not indicate a fault in the control panel, but will be corrected when the machine is turned off and then control panel, but will be corrected when the machine is turned off and then on once again.

6.

6. BaBacckiking ng Up Up ththe De Datataa

6.

6.11 OOuuttlliinnee

You can back up the data in the SRAM mounted to the main controller PCB using the You can back up the data in the SRAM mounted to the main controller PCB using the Service Support Tool.

Service Support Tool.

The SRAM contains the following items of data: The SRAM contains the following items of data: •• SSeerrvviicce me moodde se seettttiinnggss

•• UUsseer r mmoodde e sseettttiinnggss

•• VVararioious us mamachchinine ine infoformrmatatioionn

By keeping the data as a backup, you can make use of it after replacing the main control- By keeping the data as a backup, you can make use of it after replacing the main control- ler PCB, thereby simplifying the work of setting up service mode or user mode.

ler PCB, thereby simplifying the work of setting up service mode or user mode.

We recommend that you make a backup of the data using the Service Support Tool when- We recommend that you make a backup of the data using the Service Support Tool when- ever you have changed the service mode or user mode settings.

ever you have changed the service mode or user mode settings.