3.0 - 4.0 mils DFT Ameron Amercoat 385 • 276 Carboline Carboguard 890 • 214 Devoe Devran 224HS • 212 Hempel Coatings (USA), Inc. Hempadur 4520 400 Hempel Coatings (USA), Inc. Hempadur 45880 • 215 International Intergard 401 • 64 International Intergard 475 HS • 175 Jotun Paints Penguard HB 380 PPG Industries Aquapon 97-130 373 Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235 Sigma Coatings CM II 7456 US • 300 Tnemec Company Chembuild 135 • 133 Tnemec Company S.T. Typoxy N27 • 300
TIECOAT
Epoxy - Polyamide High Build 5.0 - 7.0 mils DFT
Respirators are strongly recommended when applying polyurethane.
Ameron Amercoat 450 Series • 335 Carboline Carbothane 134 HG • 288 Devoe Devthane 379 • 311 Hempel Coatings (USA), Inc. 55 Series 372 Hempel Coatings (USA), Inc. Hempathane 5595 • 332 International Interthane 990 395 International Interthane 990HS • 332 Jotun Paints Hardtop HB • 256 PPG Industries 95-812 • 241 Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289 Sigma Coatings Sigmadur HS Semigloss 7530 • 288 Sigma Coatings Sigmadur Versafinish 5522 • 320 Tnemec Company Endura-Shield 74 • 229 Tnemec Company Endura-Shield 75 • 193
TOPCOAT
Polyurethane - Aliphatic 2.0 - 3.0 mils DFT
QRG - 33
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.3
Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) | Vinyl (High Build)
1.5 - 2.5 mils
SSPC-SP6 (NACE No. 3) Commercial blast finish.
13.0 mils (min)
Coating System 3.4. After applying the tie-coat over the inorganic zinc primer, repair any damage that exposes the base metal with Coating System 3.4. DO NOT APPLY inorganic zinc on top of (or overlapping) the final three coats of System 3.3.
Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
Keep inorganic zinc silicate mixed, using agitated pot while applying. Use System 3.3.1 if you need a water-reducible primer.
Ameron Dimetcote 9 491 Carboline Carbozinc 11 515 Carboline Carbozinc 11 HS • 264 Hempel Coatings (USA), Inc. Galvosil 1568 • 320 Hempel Coatings (USA), Inc. Galvosil 1578 520 Jotun Paints Resist 86 455 PPG Industries Metalhide 1001 Primer 97-673/97-674 397
PRIMER Self-Cured Inorganic Zinc - Solvent Reducible 2.0 - 3.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 Hempel Coatings (USA), Inc. Hempanyl Primer 1606 685 Jotun Paints Vinylguard Silvergray 88 531 PPG Industries Vinyl Primer and 97-349 702
TIECOAT
Vinyl 1.0 - 1.5 mils DFT
Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 Hempel Coatings (USA), Inc. Hempanyl Hi-Build 4622 546 Jotun Paints Pioner TC 565 PPG Industries 97-350 Series 613 TOPCOAT #1 Vinyl High Build 5.0 - 7.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 Hempel Coatings (USA), Inc. Hempanyl Hi-Build 4622 546 PPG Industries 97-350 Series 613 TOPCOAT #2 Vinyl High Build 5.0 - 7.0 mils DFT QRG - 34
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.3.1
Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) | Vinyl (High Build)
1.0 - 3.0 mils
SSPC-SP6 (NACE No. 3) Commercial blast finish.
14.0 mils (min)
Coating System 3.4. After applying the tie-coat over the inorganic zinc primer, repair any damage that exposes the base metal with Coating System 3.4. DO NOT APPLY inorganic zinc on top of (or overlapping) the final three coats of System 3.3.1.
Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
Keep inorganic zinc silicate mixed, using agitated pot while applying. See also System 3.3 (solvent reducible).
Ameron Dimetcote 21-5 • 0 Carboline Carbozinc 11 WB • 0 PRIMER Self-Cured Inorganic Zinc - Water Reducible 3.0 - 4.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 TIECOAT Vinyl 2.0 - 3.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 TOPCOAT #1 Vinyl High Build 5.0 - 7.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 TOPCOAT #2 Vinyl High Build 5.0 - 7.0 mils DFT QRG - 35
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.4
Zinc-Rich Epoxy | Vinyl (High Build) | Vinyl (High Build)
1.5 - 2.5 mils
SSPC-SP6 (NACE No. 3) Commercial blast finish.
13.0 mils (min)
Use this system.
Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
Ameron Amercoat 68HS • 288 Carboline Carbozinc 859 • 325 Jotun Paints Barrier • 294 PPG Industries Aquapon Zinc Rich 97-670 403PRIMER
Epoxy - Zinc-Rich 3.0 - 4.0 mils DFT
Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 Jotun Paints Vinylguard Silvergray 88 531 PPG Industries 97-350 Series 613 TIECOAT Vinyl High Build 5.0 - 7.0 mils DFT Ameron Amercoat 220 • 180 Carboline Carbocrylic 3359 DTM • 60 Jotun Paints Pioner TC 565 PPG Industries 97-350 Series 613 TOPCOAT Vinyl High Build 5.0 - 7.0 mils DFT QRG - 36
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.5
Epoxy Mastic | Polyamide Epoxy (High Build) | Aliphatic Polyurethane
1.5 - 3.0 mils
SSPC-SP3 Power-brush finish. (Remove all loose paint and rust.)
12.0 mils (min)
Use this system.
Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
Available in colors. May use System 3.5.1 Aluminum-Filled Epoxy Mastic (Surface-Tolerant Primer) for better performance if aluminum color is acceptable.
Ameron Amerlock 400 • 120 Carboline Carboguard 890 • 214 Devoe Devran 224HS • 212 Hempel Coatings (USA), Inc. Hempadur 45880 • 215 International Interseal 670 HS • 240 Jotun Paints Jotamastic 87 • 196 PPG Industries 97-145 • 128 Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272 Sigma Coatings TCP 7476 • 224 Tnemec Company Chembuild 135 • 133
PRIMER Epoxy Mastic - Surface Tolerant 5.0 - 7.0 mils DFT Ameron Amercoat 385 • 276 Carboline Carboguard 890 • 214 Devoe Devran 224HS • 212 Hempel Coatings (USA), Inc. Hempadur 4520 400 Hempel Coatings (USA), Inc. Hempadur 45880 • 215 International Interseal 670 HS • 240 Jotun Paints Penguard HB 380 PPG Industries Aquapon 97-130 373 Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235 Sigma Coatings CM II 7456 US • 300 Tnemec Company Chembuild 135 • 133 Tnemec Company S.T. Typoxy N27 • 300
TIECOAT
Epoxy - Polyamide High Build 5.0 - 7.0 mils DFT
Respirators are strongly recommended when applying polyurethane.
Ameron Amercoat 450 Series • 335 Carboline Carbothane 134 HG • 288 Devoe Devthane 379 • 311 Hempel Coatings (USA), Inc. 55 Series 372 Hempel Coatings (USA), Inc. Hempathane 5595 • 332 International Interthane 990 395 International Interthane 990HS • 332 Jotun Paints Hardtop HB • 256 PPG Industries 95-812 • 241 Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289 Sigma Coatings Sigmadur HS Semigloss 7530 • 288 Sigma Coatings Sigmadur Versafinish 5522 • 320 Tnemec Company Endura-Shield 74 • 229 Tnemec Company Endura-Shield 75 • 193
TOPCOAT
Polyurethane - Aliphatic 2.0 - 3.0 mils DFT
Vendors of mechanical equipment normally have their own standard coatings and find it economically impractical to change to purchaser- specified systems such as this one. Chevron's specified system must be applied unless the vendor obtains written approval from Chevron to substitute another. The alternative is to accept the vendor's standard primer and then apply Coating System 3.7 (Manufacturer's
Standard/Universal Primer/Polyamide Epoxy (High Build)/Aliphatic Polyurethane).
QRG - 37
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.5.1
Epoxy Mastic - Aluminum Color Only | Polyamide Epoxy (High Build) | Aliphatic Polyurethane
2.0 - 3.0 mils
SSPC-SP7 (NACE No. 4) Brush-blast finish, preferred. SPPC-SP3 Power-brush finish, acceptable.
12.0 mils (min)
Use this system.
Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
System 3.5 is available in colors.
Ameron Amerlock 400 AL • 120 Carboline Carbomastic 15 • 88 Devoe Bar-Rust 239 • 119 Hempel Coatings (USA), Inc. Hempadur 45880-19870 • 215 International Interseal 670 HS • 240 Jotun Paints Jotamastic 87 AL • 110 PPG Industries UC65372/UC65373 • 118 Sherwin Williams Epoxy Mastic Aluminum II B62S100/BV100 • 171 Sigma Coatings TCP Aluminum 7477 • 240 Tnemec Company Chembuild 135-1243 • 133
PRIMER Epoxy Mastic - Surface Tolerant - Aluminum Filled 5.0 - 7.0 mils DFT Ameron Amercoat 385 • 276 Carboline Carboguard 890 • 214 Devoe Devran 224HS • 212 Hempel Coatings (USA), Inc. Hempadur 4520 400 Hempel Coatings (USA), Inc. Hempadur 5540 • 285 International Interseal 670 HS • 240 Jotun Paints Penguard HB 380 PPG Industries Aquapon 97-130 373 Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235 Sigma Coatings CM II 7456 US • 300 Tnemec Company Chembuild 135 • 133 Tnemec Company S.T. Typoxy N27 • 300
TIECOAT
Epoxy - Polyamide High Build 5.0 - 7.0 mils DFT
Respirators are strongly recommended when applying polyurethane.
Ameron Amercoat 450 Series • 335 Carboline Carbothane 134 HG • 288 Devoe Devthane 379 • 311 Hempel Coatings (USA), Inc. 55 Series 372 Hempel Coatings (USA), Inc. Hempathane 5595 • 332 International Interthane 990 395 International Interthane 990HS • 332 Jotun Paints Hardtop HB • 256 PPG Industries 95-812 • 241 Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289 Sigma Coatings Sigmadur HS Semigloss 7530 • 288 Sigma Coatings Sigmadur Versafinish 5522 • 320 Tnemec Company Endura-Shield 74 • 229 Tnemec Company Endura-Shield 75 • 193
TOPCOAT
Polyurethane - Aliphatic 2.0 - 3.0 mils DFT
Vendors of mechanical equipment normally have their own standard coatings and find it economically impractical to change to purchaser- specified systems such as this one. Chevron's specified system must be applied unless the vendor obtains written approval from Chevron to substitute another. The alternative is to accept the vendor's standard primer and then apply Coating System 3.7 (Manufacturer's
Standard/Universal Primer/Polyamide Epoxy (High Build)/Aliphatic Polyurethane).
QRG - 38
• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits. Consult manufacturer's product data sheets for specific details about applying any coating.
May 1998
3.7
Manufacturer's Standard | Universal Primer | Polyamide Epoxy (High Build) | Aliphatic Polyurethane
1.5 - 3.0 mils
SSPC-SP6 (NACE No. 4) Commercial blast finish.
11.0 mils (min)
Use this system without reapplying manufacturer's standard primer. Coat, Generic Classification, DFT By Max Svc Temp VOC (G/L) Product Designation Manufacturer Anchor Pattern: Surface Prep: Total DFT: Touch Up:
Three-Component Systems
Apply universal primer over manufacturer's standard primer; then apply tiecoat and topcoat.
PRIMER [Mfg's Standard]
2.0 - 3.0 mils DFT
Ameron Amercoat 180 • 312 Carboline Carbocoat 150HG • 336 Carboline Rustbond Penetrating Sealer • 24 Devoe Devguard 4160 419 Hempel Coatings (USA), Inc. Uni-Primer 1314 520 International Interseal 670 HS • 240 Jotun Paints Penguard HB 380 PPG Industries 97-680 414 Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ3 • 308 Sherwin Williams Kem Kromik B50NZ6 415 Sigma Coatings Sigmacover Primer II 7413US • 300 Tnemec Company Chem-Prime HS 37H 348
PRIMER