Especificaciones de las métricas propuestas en el plan

And so, the ultimate question that we must ask ourselves is whether or not these technologies that incorporate rotation can actually overcome the force of gravity completely. All of the above machines can certainly create

measurable weight loss, but the gyroscope method seems to not quite

harness enough energy to produce levitation. After all, the Finnish experiment by Dr. Podkletnov is only capable of reducing weight by two percent per ring that is used. There must be a better way!

Indeed, other controversial researchers have indeed found a way to work around this problem, and once again magnetism comes to our aid. We

remember that magnetism harnesses the aether very directly, and its effects are quite measurable through many of the experiments that we have

discussed. In the case of the Searl Levity Disc, Prof. John R.R. Searl used a series of custom-made magnetic cylindrical rollers that rotated within a nested series of magnetic rings. (The next image shows just one ring, surrounded by one layer of rollers.) A special elemental metal called “neodymium” was

added to give the magnets a high degree of strength. And indeed, if you try to buy neodymium magnets, they are only sold with strict warnings due to their power. If the magnets attract each other together they can shatter, and protective eyewear is necessary to guard against the damage that the fragments from such a collision could create. So, the amount of energy that these powerful magnets could harness on their own, coupled with their rotation, was more than enough to create levitation. Dr. Searl named this lift

"The Searl Effect" for obvious reasons.

Since Prof. Searl’s work is the most well-documented account of complete anti-gravity propulsion on record, a bit of historical background is worthwhile here. Prof. Searl worked for the Midlands Board in Australia as an electric fitter in 1949, and conducted experiments in electricity due to his own interest in it. While working on electric motors and generators, he noticed that the spinning metal parts were creating a small current of electromagnetic energy, with the positive pole towards the center and the negative pole out towards the rim. By now this should be familiar to us. Then in 1950, he was working with rotating slip rings and again measured a small current of electromagnetic energy emerging from the ring edges. He also realized that his hair would bristle if he allowed the rings to rotate without trying to draw current from them. From these observations, he concluded that the centrifugal force of rotation in the metal was causing free electrons to be spun out. In this sense, he made highly similar discoveries as Dr. DePalma regarding the ability to draw current out of a rotating magnetic object, only in his case he found the effect in metal that wasn’t magnetized. Furthermore, he believed that the electrons he measured were coming from the atoms in the rotating metallic pieces themselves, and not from the free aetheric energy of the universe.

Later, he would obviously change his mind!

Simplified diagram of Searl's system of magnetic rings and rotating magnetic rods.

In order to engineer this principle into a working prototype, he constructed a generator that is now referred to as a Gyro-cell, pictured above. The above image is a simplified version of what actually involves three concentric rings and three sets of rolling cylindrical rods. A layer of nylon is attached to each ring in order to control the rate at which the electrons emerge, which allows for an even output of energy; otherwise it works in sudden bursts instead of a smooth flow. At first, back in 1952, this was simply built as a generator that was about three feet in diameter. Searl and a friend tested it outdoors, and a small engine was used underneath the generator to start the rollers in motion around the rings. All Searl was expecting to see was a certain amount of electrical power generated by the device. This did indeed occur, and at a much higher potential than he had imagined. The effect was strong enough even at relatively low speeds that 10.5 volts was created – and it could be measured by the static charges that would emerge on nearby objects.

6.6.1 LEVITATION AND IONIZATION

As the generator continued to pick up speed, Searl and his friend were

shocked to see the generator break away from the engine that had started it in motion and levitate to a height of 50 feet above the ground! It maintained this altitude while continuing to move at a faster and faster rate by itself, and a pink glow of ionized air appeared around it. While this was happening, the electromagnetic charge in the air around them rose so highly that all the radio receivers in the area spontaneously turned on by themselves, which must have only added to the reeling mystery and fascination that they were experiencing. Finally, the generator shot up into the sky at a tremendous speed and appeared to completely leave the Earth’s atmosphere.

Once he saw the end result of his new invention, Searl realized that he was

working with a profound new discovery that went way beyond the creation of a generator for electricity. Expecting the levitation effects to continue, he mounted the Gyro-cell generators into disc-shaped crafts that did not need to be attached to the ground to be powered up. Over the course of time, ten different craft were built, and indeed, the anti-gravity effect was so powerful and uncontrollable in the early phases that many of the prototypes were lost!

This continued to be a problem until Dr. Searl learned how to change and control the amount of upward thrust that the rotating magnets were providing.

6.6.2 ELECTROMAGNETIC MOVEMENT CONTROL

The way that he discovered how to control the movement of the craft was quite humorous, and more than a bit embarrassing. After years of work in Australia, Searl had finally gotten enough clout and scientific reputability that he had attracted some media attention. A television crew had arrived to attempt to film this levitating craft in action. To Searl’s horror, although the Levity Disc had reliably worked in front of many different witnesses, in the presence of the camera it would not rise at all! Clearly this must have been a disappointing and highly perplexing moment, to say the least!

However, a short time later this led Prof. Searl to discover that the

electromagnetic fields from the camera had directly affected whether the craft would levitate or not. This was his big "Eureka" that led him to develop a way to change the amount and direction of thrust, thus gaining the ability to fly the craft as a remote-controlled device. The Levity Disc was flown on repeated occasions for many different witnesses, and the entire story is located on his website, linked below. Larger craft have also been built, some at a width of 12 feet and two that were actually 30 feet in diameter. Numerous articles discuss Searl's invention on the Institute for Free Energy website and in various

editions of the New Energy News journal. It is often considered the most popular anti-gravity prototype, because it has also been the most successful.

Interior of Searl Levity Disc, showing magnetic rings and rods.

The above image is a see-through diagram of the interior of the flying anti-gravity disc. The three concentric magnetic rings with the rotating magnetic cylinders surrounding them are clearly seen in this picture. Were you to see it

with the outside metallic layer in place, it would simply look like a “flying saucer.”

6.6.3 SELF-SUSTAINING POWER GENERATION

Interestingly enough, with the Searl device we again come back to a working free-energy system as well, as a result of harnessing electricity from the powerful rotating magnets. John Thomas has studied and written about Prof.

Searl’s discoveries quite thoroughly in his book Anti-Gravity: The Dream Made Reality, and there he reveals that the power source for the device was self-sustaining once a certain amount of current ran into it, in order to get it

started. It literally generated its own energy from the surrounding aether, and thus could function indefinitely with no source of stored power in the device.

This shouldn’t be much of a surprise to us, after we saw the “sprinkler” effect from Dr. Bruce De Palma’s “homopolar generator” and later the “Sunburst” N-Machine that was independently tested and verified by Dr. Robert Kincheloe.

6.6.4 “MATTER SNATCH”

We have already mentioned the fact that the Searl Disc could be seen to have a pinkish glow around it, even though it was nothing more than a series of rotating magnets and did not possess any elements that were specifically designed to give off light. Also, in John Thomas’ book it is revealed that the gravity-neutralizing effects included a certain amount of area around the device, not just the device itself. This area was called the "neutral zone" and it extended around the bottom and top of the disc. So, when it would first take off, some of the land from the surrounding countryside would be contained within this neutral zone and would be caught up in the device's gravitational field as it took off! And thus, Thomas writes:

"It can be seen from the gravity field diagram that a neutral zone appears below the craft as well as the neutral ring above, when the levity drive is on.

If matter becomes located in the zone, then it is held there.

In consequence, the Searl craft so far made have left their mark on the

country-side in the form of large, neat holes when they suddenly take off. The chunk of earth is taken up with it, [and this is] called "matter snatch…

The only hazard so far observed is that if the craft hovers for too long near the ground the soil becomes burnt due to the electric currents in it which build up heat. Also the nervous systems of animals are interfered with by ionizing discharge if they come too near. "

6.6.5 THE LONG ROAD TO PUBLIC ACCEPTANCE

With the Searl Disc we can see that the technology to actually overcome gravity for propulsion already exists. By 1968, Prof. Searl had the SEG ready for commercial use, but he found total failure in getting his invention

commercially applied. The magnets were very expensive to produce, as neodymium is a rare element and all the magnets had to be created at the same time in order for the device to function properly. Thus, it wasn’t easy for him to make new prototypes, as proper funding was simply not available.

However, he had all of his home’s electric power running off of an SEG, and in 1983 he was jailed for ten months for allegedly “stealing electricity” off of the

power grid. The local electricity board did not believe that he was using the SEG for power. While he was in jail, a “mysterious” fire destroyed all his experimental data and all prototypes that he had created, and his wife left him. By 1990 he was quite despondent and ready to completely give up any further work on the project, but then things started to change; people sent him financial donations to keep him going, and an American offered to publish his book. Subsequently he was able to publish several more books and there have even been inquiries about a movie of his life being made, with Sir Anthony Hopkins portraying him.

Obviously we have not given all the technical details of how the SEG functions, and we encourage our readers to support Prof. Searl’s work by visiting his official website and purchasing some of the reading materials that his team now has to offer in order to get more details. With the proper funding, the expected results should be immediately forthcoming, and a design application ready for commercial use could be quickly rolled out to the public.