Estrategias de marketing

Editing Column: If you want to add a column mark to a blank line or change the column mark on

a line, you may move the mouse cursor toward the line. When the color of the line is changed, you may click the mouse to display the Edit Column dialog box. The left dialog box is displayed by Generate SADS Data Sub-command and the right dialog is displayed by Link ETABS Data Sub- command.

You should select and enter the information in the dialog box.

Column Mark: Enter the column mark for the line.

Braced in X-X: Check the check box if the column is braced column in X-X direction. Braced in Y-Y: Check the check box if the column is braced column in Y-Y direction. Transfer plate connection: If the column is connected to transfer plate at the highest end,

check the check box. Otherwise, un-check the check box. Click Save button to accept these data.

If you want to add or change many column marks that the number is sequentially, e.g. K1, K2, K3,

K4, etc., you don't click the Save button, instead of click down the Repeat Incremental button .

When you select the sequential line and click the mouse button, the line is assigned a sequential column mark. After you finish the sequential input, you mush click up the Save button in Edit Column dialog box.

Editing Beam: If you want to add a beam mark to a blank bay or change the beam mark on a bay,

you may move the mouse cursor toward the bay. When the color of the bay is changed, you may click the mouse to display the Edit Beam dialog box. The left dialog box is displayed by Generate

You should select and enter the information in the dialog box.

Beam Type: Select the type of beam.

Beam Mark: Enter the beam mark, lintel mark or associate beam mark according with the type

of beam.

Main Beam: Enter the main beam mark if the beam is associate beam.

Click Save button to accept these data.

If you want to add or change many beam marks that the number is sequentially, e.g. RB1, RB2, RB3, RB4, etc., you don't click the Save button, instead of click down the Repeat Incremental

button . When you select the sequential bay and click the mouse button, the bay is assigned a

sequential beam. After you finish the sequential input, you mush click up the Save button in Edit Beam dialog box. For secondary beam, the beam marks may be duplicated. In this case, you can

use Repeat Equal button . When you select a next bay and click the mouse button, the bay is

assign the same mark and same type.

In Generate SADS Data Sub-command, there is a To Load button. If you click this button, the Edit Beam Load dialog box is displayed as below.

You may enter any vertical load to the beam. But, you should not enter slab, beam and column vertical load if the slabs, beams and columns are included in ETABS output file. You can find the

description of data items from Maintain eam ata ub-command.

Editing Wall: If you want to add a wall mark to a blank pier or change the wall mark on a pier, you

may move the mouse cursor toward one of the panel of the pier. When the color of the pier is changed, you may click the mouse to display the Edit Wall dialog box. The left dialog box is displayed by Generate SADS Data Sub-command and the right dialog is displayed by Link ETABS Data Sub-command.

You should select and enter the information in the dialog box.

Wall Mark: Enter the wall mark for the pier. Sub-wall: Check the check if the wall is sub-wall.

Main Wall: If the wall is sub-wall, enter the mark of main wall.

Bending Along X: Check the check box if you wish to consider the bending moment of wall in

X-X direction.

Bending Along Y: Check the check box if you wish to consider the bending moment of wall in

Y-Y direction.

Click Save button to accept these data.

You may use the Repeat Incremental button as in Edit Column dialog box.

Editing Slab: If you want to add a slab mark to a blank area or change the slab mark on a area,

you may move the mouse cursor toward the center of the area. When the color of the area is changed, you may click the mouse to display the Edit Slab dialog box.

You should select and enter the information in the dialog box.

Slab Mark: Enter the slab mark for the area.

Slab Type: Slab type defined in Maintain lab ata ub-command . Click Save button to accept these data.

You may use the Repeat Incremental button and Repeat Equal button as in Edit Beam dialog box. If you have completed the beam mapping for one floor, e.g. ROOF, and you find the beam

mapping of following floor is similar, e.g. typical floor, you may click the Duplicate button to

display the following dialog box.

If both mapping of slab, beam and additional load are similar in source batch and destination batch, you may check both Slab Map, Beam Map and Additional Load check boxes. Otherwise, you should check the desired check box. You may select batch code RF in the Source Batch combo box and select batch code TF in Destination Batch combo box. You should set prefix mapping between these 2 floors and then click the OK button. SADS will duplicates the beam

marks from roof floor to typical floor using the prefix mapping and display the typical floor framing plan.