Factor de riesgo químico

See Figure 31 below for an example of the Configuration screen. See Table 16 on page 73 for an overview of the different browser menu functions. Please refer to the specific sections on the OSD menu functions for more information on configuring these functions.

Note: The configuration settings defined remotely are different from those that can be defined locally.

Figure 31: Remote browser configuration (System information - HDD screen shown)

8BChapter 9: Using the web browser

Table 17: Description of remote configuration menus Menu Function Description

Device parameters Device information Device name: Define the DVR name. The default name is TVR 41.

Device number: The device number to use for the DVR when programming the remote control. The default value is 255.

Zone ID: Each DVR in a daisy chain must have a unique zone ID so that it can be controlled by a KTD-405. The default value is 1.

Overwrite: Enable or disable. Enabling this setting causes recorded files to be overwritten once the HDD is full.

eSATA: Define how an external recording device saves records. See “Using an external recording device” on page 89 for more information.

Event priority: Define the priority between text insertion event and motion alarm if both are triggered at the same time. Default is Motion alarm (Text In < Motion).

Time settings Define time and date. See “Configuring time and date” on page 38 for more information. See “Configuring an NTP server” on page 112 for information on setting up NTP time settings. Holiday settings Define when recordings occur during holiday

periods. See “Holiday schedules” on page 92 for more information.

Camera settings Display settings Define which information is displayed on-screen. See “Configuring the camera OSD settings” on page 129 for more information.

Video settings Define general recording settings. See “Defining a recording schedule” on page 90 for more information.

Recording schedule Define the recording schedules. See “Defining a recording schedule” on page 90 for more information.

Motion detection Define motion detection parameters. See “Setting up motion detection” on page 100 for more information.

Privacy mask Define the on-screen privacy mask areas. See “Setting up privacy masking” on page 130 for more information.

Tamper-proof Define the video tampering detection settings. See “Detecting video tampering” on page 106 for more information.

Video loss Define the video loss detection settings. See “Detecting video loss” on page 105 for more information.

8BChapter 9: Using the web browser

Menu Function Description

Image Adjust image quality on screen. See “Adjusting camera image settings” on page 131 for more information.

Covert camera Define the cameras whose images cannot be displayed by those not logged in. See “Hiding a camera image from view” on page 131 for more information.

Capture settings Define the image quality of snapshots.

Manual record Define which cameras can manually record. See “Manual recording” on page 93 for more

information.

Network settings General Define the general network settings. See “Configuring general network settings” on page 109 for more information.

PPPoE Define the PPPoE settings. See “Configuring PPPoE” on page 110 for more information. DDNS Define the DDNS settings. See “Configuring

DDNS” on page 111 for more information. Email Define the settings to send an e-mail. See “Configuring e-mail” on page 112 for more information.

NetHDD Define the remote storage system for DVR recordings. See “Using a network storage system” on page 84 for more information. UPnPTM Enable this function so that the DVR can

automatically configure its own port forwarding. See “Configuring UPnPTM” on page 113 for more information.

SNMP Define the SNMP settings. See “Configuring SNMP” on page 115 for more information. FTP Define the FTP settings. See “Configuring PPPoE” on page 110 for more information. More settings Define a remote alarm host, multicast IP as well

as the server, HTTP and RTSP ports. See page 115 for more information.

Serial port settings 232 serial port Define the RS-232 parameters. See “Configuring the RS-232 port” on page 133 for more

information.

485 serial port Define the RS-485 parameters.

Alarm settings Alarm input Define the alarm input parameters for when an external alarm is triggered. See “Setting up external alarms” on page 102 for more information.

Alarm output Define the response when an external alarm is triggered. See “Setting up external alarms” on page 102 for more information.

Alarm audio Define the parameters to import an alarm audio file. See “Alarm audio messages” on page 98.

8BChapter 9: Using the web browser

Menu Function Description

Audio output Define the parameters to import an alarm audio file. See “Alarm audio messages” on page 98. Advanced settings Define the warning buzzer time. See “Modifying

the warning buzzer” on page 100 for more information.

Notification Define the notification parameters when irregular events occur such as HDD full. See “Description of alarm notification types” on page 97 and “Setting up system notifications” on page 105. User management Define, modify, and delete users. See Chapter 16

“User management” on page 139 for more information.

HDD management Basic settings Initialize the HDD. See “Initializing HDDs” on page 121 for more information.

Storage settings Define the storage capacity of the HDD. See “Controlling disk space on the HDD” on page 121 for more information.

Auto archive Archive settings Define archive scheduling as well as camera and recording type selection. See “Auto archiving” on page 68 for more information.

Archive status Review archive status. See “Auto archiving” on page 68 for more information.

Maintenance Remotely update the DVR firmware, restore

default factory settings, restart the DVR, and import parameters remotely. See Chapter 15 “DVR management” on page 133 for more information.

Text insertion Define access device, access mode, and start string. See “Capturing text insertions” on page 81.

V-stream encoding Define the maximum bit rate and frame rate. See “V-stream encoding” on page 42 for more information.

System information

Camera, Record, Alarm, Network, and HDD

Review the status of the cameras, recordings, alarms, network, and HDDs. See “Viewing system information” on page 136 for more information.