Marco teórico sobre menores infractores
3. Factores de riesgo de los menores infractores
Designation Order Number
19" Basic Unit 1 U S46998-Z101-A14
P Paanneellss 11 UU ffoorr:: - 12 ST™ S46998-Z101-S50 - 20 E-2000™ / E-2000-APC / SC / SC-APC S46998-Z101-S51 - 12 SC-Duplex S46998-Z101-S56
1 U (height unit) = 44.45 mm Delivery Unit: 1 pc.
Designation Order Number
19" Basic Unit 2 U S46998-Z101-A16
P Paanneellss 22 UU ffoorr:: - 24 ST S46998-Z101-S70 - 40 E-2000 / E-2000-APC / SC / SC-APC S46998-Z101-S71 - 24 SC-Duplex S46998-Z101-S76
1 U (height unit) = 44.45 mm Delivery Unit: 1 pc.
Further FO Units: see next page!
19” FO Unit, slidable, 1 U, for up to 2 splice trays
19” FO Unit, slidable, 2 U, for up to 4 splice trays
19” FO Unit, slidable, 3 U, for up to 6 splice trays
FO
Hardw
are
D
Deessccrriippttiioonn
The FO unit accomodates 2 splice trays and can be installed in any network distributor with 19" mounting. It is used for final termination or distribution of optical fibers. The fully extending telescopic drawer optimizes access to the splice trays and the cable strain relief. All popular splice trays can be installed.
Installation Depth: 363 mm
I
Itteemmss ssuupppplliieedd
Incl. mounting accessories for patch panel, cable management clips, security lock and tray cover. Supplied without patch panels (order separately).
Patch panels are available for the splice unit with suitable knockouts for fitting various FO adapters.
Panels are to be ordered separately!
>
19" FO Units Slidable
Adaptable in all 19" Cabinets and Frames
Designation Order Number
19" Basic Unit 1 U, slidable S46998-Z101-A13
P Paanneellss 11 UU ffoorr:: - 12 ST™ S46998-Z101-S40 - 12 FC-PC S46998-Z101-S41 - 20 E-2000™ / E-2000-APC / S46998-Z101-S42 SC / SC-APC 12 SC-Duplex S46998-Z101-S47
1 U (height unit) = 44.45 mm Delivery Unit: 1 pc.
Designation Order Number
19" Basic unit 2 U, slidable S46998-Z101-A15
P Paanneellss 22 UU ffoorr:: - 24 ST S46998-Z101-S60 - 24 FC-PC S46998-Z101-S61 - 40 E-2000 / E-2000-APC / S46998-Z101-S62 SC / SC-APC - 24 SC-Duplex S46998-Z101-S67
1 U (height unit) = 44.45 mm Delivery Unit: 1 pc.
Designation Order Number
19" Basic unit 3 U, slidable S46998-Z101-A17
P Paanneellss 33 UU ffoorr:: - 48 ST S46998-Z101-S80 - 48 FC-PC S46998-Z101-S81 - 48 E-2000 / E-2000-APC / S46998-Z101-S82 SC / SC-APC - 36 SC-Duplex S46998-Z101-S87
19" FO Unit, assembled
FO
Hardw
are
D
Deessccrriippttiioonn
Adapters screwed into patch panel, 2.5 m pigtails as 900 µm composite-buffered fiber, connectors in the adapters, open end stored in the splice trays, splice trays mounted on central element. All fibers are prepared for splicing. A length of 1200 mm without coating is stored in the splice trays.
When ordering, select the appropriate fiber and adapter type from the following order matrix.
Delivery unit: 1 pc.
19 '' FO Units 1 U
Adapters Order Number Order Number Order Number
SM 9/125 µm MM 50/125 µm MM 62.5/125 µm
12 ST™ - S46998-A5-A138 S46998-A5-A176
12 FC / PC S46998-A5-A101 S46998-A5-A139 S46998-A5-A177
20 E-2000™ S46998-A5-A102 S46998-A5-A140 S46998-A5-A178
20 E-2000 / APC S46998-A5-A103 - -
20 SC S46998-A5-A105 S46998-A5-A143 S46998-A5-A181
20 SC / APC S46998-A5-A106 - -
12 SC Duplex S46998-A5-A107 S46998-A5-A145 S46998-A5-A183
10 E-2000 Duplex S46998-A5-A104 S46998-A5-A142 S46998-A5-A180
19 '' FO Units 2 U
Adapters Order Number Order Number Order Number
SM 9/125 µm MM 50/125 µm MM 62.5/125 µm
24 ST - S46998-A5-A153 S46998-A5-A191
24 FC / PC S46998-A5-A116 S46998-A5-A154 S46998-A5-A192
40 E-2000 S46998-A5-A117 S46998-A5-A155 S46998-A5-A193
40 E-2000 / APC S46998-A5-A118 - -
40 SC S46998-A5-A120 S46998-A5-A158 S46998-A5-A196
40 SC / APC S46998-A5-A121 - -
24 SC Duplex S46998-A5-A122 S46998-A5-A160 S46998-A5-A198
20 E-2000 Duplex S46998-A5-A119 S46998-A5-A157 S46998-A5-A195
19 '' FO Units 3 U
Adapters Order Number Order Number Order Number
SM 9/125 µm MM 50/125 µm MM 62.5/125 µm
48 ST - S46998-A5-A168 S46998-A5-A206
48 FC / PC S46998-A5-A131 S46998-A5-A169 S46998-A5-A207
48 E-2000 S46998-A5-A132 S46998-A5-A170 S46998-A5-A208
>
19" FO Units, Assembled, with Diamond Pigtails
Distributor 48/96
Patch Panel Splice Tray Holder for 8 splice trays
FO
Hardw
are
T
Teecchhnniiccaall DDeessccrriippttiioonn // IItteemmss SSuupppplliieedd
Housing, two-section, made from 1.5 mm sheet steel,
powder-coated in textured RAL 7032, in two versions for accomodating up to 48 or 96 optical fibers
Wall-mounting section with holes for wall-mounting 11/16 jumper guides for jumper cable/fiber excess 1/2 splice tray holders for 8 / 16 splice trays
2 comb strips for cable strain relief and brush inserts for dust protection
Simple mounting of patch panel on wall-mounting
section
Cover with hook-in mechanism and two twist locks IP 20 rated as per EN 60529/10.91
C
Caappaacciittyy
Up to 48 / 96 fibers (2 / 4 panels), up to 8 / 16 splice trays.
A
Apppplliiccaattiioonn wwiitthhoouutt PPaattcchh PPaanneell
When the distributor 48 is used without patch panel, 1 / 2 splice tray holders can be retrofitted (max. splice capacity 16/32).
L
Loocckkiinngg SSyysstteemmss
Standard double-bit lock insert, replaceable by 15" lock from Zeiss-Ikon.
>
Wall-mounted Distributor 48/96
Indoor
Designation Delivery Unit Order Number
Distributor 48, 500 x 500 x 120 mm (WxHxD) 1 pc. S46998-Z101-A8
Distributor 96, 500 x 900 x 120 mm (WxHxD) 1 pc. S46998-Z101-A9
A
Acccceessssoorriieess
Patch Panels
- for 24 SC Duplex Connectors 1 set S46998-Z101-S25
- for 48 ST™ Connectors 1 set S46998-Z101-S23
- for 48 SC / E-2000™ Connectors 1 set S46998-Z101-S24
Splice Tray Holder 1 pc. S46998-Z101-S26
Lock 15" 1 pc. S46998-Z101-S27
Key 15 " 1 pc. S46998-Z101-S28
Standard Splice Tray for 12 single fibers, without cover Pack of 2 C46197-A7-A70 (for details of this and for splice organizers, see pages 124/125) Pack of 10 C46197-A7-A66
Collocation Distributor
Patch Panel Splice Tray Holder
FO
Hardw
are
Designation Delivery Unit Order Number
Wall-mounted Collocation Distributor, 400 x 250 x 120 mm (WxHxD) 1 pc. S46998-Z101-A10
A
Acccceessssoorriieess
Patch Panel
- for 24 ST™ Connectors 1 set S46998-Z101-S29
- for 24 SC / E-2000™ Connectors 1 set S46998-Z101-S30
- for 12 SC Duplex Connectors 1 set S46998-Z101-S31
Standard Splice Tray for 12 single fibers, without cover Pack of 2 C46197-A7-A70 (for details of this and for splice organizers, see pages 124/125) Pack of 10 C46197-A7-A66
Cover for standard splice tray Pack of 10 S46998-A4-A1
T
Teecchhnniiccaall DDeessccrriippttiioonn // IItteemmss SSuupppplliieedd
Housing with doors made from 1-mm sheet steel, pow-
der-coated in RAL 7032 for accomodating up to 24 optical fibers with separate access
Wall-mounting section with holders for wall mounting 4 jumper guides
2 mountings, each holding 2 splice trays on left and right
4 comb strips for cable strain relief and rubber sealings for dust protection
Simple mounting of patch panels on wall-mounting
section
One door for covering and protecting the splice tray hol-
der, separately locked.
Second door for covering and protecting the jumper
area / splice tray holder, separately locked IP 20 rated as per EN 60529/10.91
C
Caappaacciittyy
Up to 24 fibers (1 panel), up to 2 splice trays.
A
Apppplliiccaattiioonn wwiitthhoouutt PPaattcchh PPaanneell
When the cross-connect is used without patch panel, 4 splice trays can be fitted.
>
Wall-mounted Collocation Distributor
FO
Hardw
are
Distributor / Sheet Steel
D
Deessccrriippttiioonn
The housing made of sheet steel is ideal for applications involving breakout of multifiber buffer tubes from a through cable. The only fibers of the break-out cable which are proces- sed in the housing are those that are actually needed. The rest are put to storage in the housing and can be used for a further node. The housing can be used with or without patch panel. It can also accomodate multifiber buffers and splice trays.
C
Caappaacciittyy
Up to 48 fibers (4 Panels), up to 4 splice trays
I
Itteemmss SSuupppplliieedd
1 housing of sheet steel
2 flanged panels of sheet steel, for side 1 flanged panel, for bottom
7 cable routing guides 70 x 40 mm 2 strain relief clamps
1 cable strain relief bar, double
1 door of sheet steel, with 2 hinges on right
1 mounting plate of sheet steel with 6 cable routing guides 70 x 44 mm
4 holders for patch panel 1 splice tray holder
Painted in RAL 7035
IP 55 rated as per EN 60 529/10.91