4. FOLLOWING THE SCRIPT: THE SPANISH CONSTITUTIONAL COURT
4.4 Framing the debate, constraining the Court (part 1)
T: +44 845 086 9001
W: www.bsigroup.com
STANDARDS
BS 0 A standard for standards – Principles of standardisation
BS 381C Specification for colours for identification, coding and special purposes.
BS 476-3 Fire tests on building materials and structures.
BS 476-4 Non-combustibility test for materials.
BS 476-6 Fire tests on building materials and structures. Method of test for fire propagation for products.
BS 476-7 Method for classification of the surface spread of flame tests for materials.
BS 476- 20 Method for determination of the fire resistance of elements of construction (general principles)
BS 476-21 Method for determination of fire the resistance of load bearing elements of construction.
BS 476-22 Method for determination of the fire resistance of non-load bearing elements of construction.
BS 476-23 Method for determination of the contribution of components to the fire resistance of a structure.
BS 476-24 Method for determination of the fire resistance of ventilation ducts.
BS EN 485 Aluminium and aluminium alloys. Sheet, strip and plate.
parts 1-4
BS EN 515 Aluminium and aluminium alloys. Wrought products. Temper designations.
BS EN 573 Aluminium and aluminium alloys. Chemical composition and form of wrought parts 1-4 products.
BS EN 1366-1 Fire resistance tests for service installations. Fire resistance tests for service installations. Ducts.
BS EN 1366-2 Fire resistance tests for service installations. Fire dampers.
BS EN 1366-5 Fire resistance tests for service installations . Service ducts and shafts.
BS EN 1366-8 Fire resistance tests for service installations. Smoke extraction ducts.
BS EN 1366-9 Fire resistance tests for service installations. Single compartment smoke extraction ducts.
BS EN 1366-10 Fire resistance tests for service installations. Smoke control dampers.
BS EN ISO 1461 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods.
BS 1449-1 Carbon steel plate, sheet and strip.
BS EN ISO 1479 Specification for hexagon head tapping screws.
BS EN 1506 Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section.
BS EN 1507 Ventilation for buildings. Sheet metal air ducts with rectangular section.
BS EN 1600 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels.
BS 1710 Specification for identification of pipelines and services.
BS EN 1751 Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.
BS EN ISO 2063 Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys.
BS 3533 Glossary of thermal insulation terms.
BS EN ISO 3506 Mechanical properties of corrosion-resistant stainless-steel fasteners. Bolts, parts 1-2 screws, studs and nuts.
BS EN ISO 3834-1 Quality requirements for fusion welding of metallic materials.
BS 4800 Schedule of paint colours for building purposes.
BS 4872-1:1982 Specification for approval testing of welders when welding procedure approval is not required. Fusion welding of steel.
BS 5422 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C.
BS 5970 Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100°C to +870°C.
ISO 6944-1 ISO6944-1 : 2008 Fire containment. Elements of building construction. Part 1.
Ventilation ducts.
BS EN ISO 7049 Cross recessed pan head tapping screws.
BS EN ISO 9445 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Narrow strip and cut lengths.
BS 9999 Code of practice for fire safety in the design, management and use of buildings BS EN 10048 Hot rolled narrow steel strip.
BS EN 10051 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels.
BS EN 10088-1 Stainless steels. List of stainless steels.
BS EN 10088-2 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes.
BS EN 10095 Heat resisting steels and nickel alloys.
BS EN 10130 Cold rolled low carbon steel flat products for cold forming.
BS EN 10131 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming.
BS EN 10142 Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming.
BS EN 10143 Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape.
BS EN 10149 Specification for hot-rolled flat products made of high yield strength steels for cold parts 2-3 forming.
BS EN 10209 Cold rolled low carbon steel flat products for vitreous enamelling.
BS EN 10210-2 Hot finished structural hollow sections of non-alloy and fine grain steels.
Tolerances, dimensions and sectional properties.
BS EN 10346 Continuously hot-dip coated steel flat products.
BS EN ISO 11925-2 Reaction to fire tests. Ignitability of products subjected to direct impingement of flame. Single-flame source test.
BS EN 12097 Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems.
BS EN 12020-2 Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063.
BS EN 12101-7 Smoke and heat control systems. Smoke duct sections.
BS EN 12101-8 Smoke and heat control systems. Smoke control dampers.
BS EN 12236 Ventilation for buildings. Ductwork hangers and supports. Requirements for strength.
BS EN 12237 Ventilation for buildings. Ductwork. Strength and leakage of circular sheet metal ducts.
BS EN ISO 12241 Thermal insulation for building equipment and industrial Installations.
BS EN 13030 Ventilation for buildings-Terminals-Performance testing louvres subject to simulated rain.
BS EN 13181 Ventilation for buildings-Terminals-Performance testing louvres subject to simulated sand.
BS EN 13236 Safety requirements for super abrasive products
BS EN 13264 Ventilation for buildings-Floor mounted air terminal devices-Tests for structural classification.
BS EN 13403 Ventilation for buildings. Non metallic ducts. Ductwork made from insulation duct boards.
BS EN 13501-1 Fire classification of construction products and building elements. Classification using test data from reaction to fire tests.
BS EN 13501-3 Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers.
BS EN 13501-4 Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems.
BS EN 13823 Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item.
BS EN ISO 14001 Environmental management systems. Requirements with guidance for use.
BS EN ISO 14343 Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification.
BS EN ISO 15609-4 Specification and qualification of welding procedures for metallic materials.
Welding procedure specification. Laser beam welding.
BS EN ISO 15609-5 Specification and qualification of welding procedures for metallic materials.
Welding procedure specification. Resistance welding.
BS EN 15780:2011 Ventilation for buildings. Ductwork. Cleanliness of ventilation systems.
BS EN 15871 Ventilation for buildings. Fire resisting duct sections. Kitchen extract.
BS EN 15882-1 Extended application of results from fire resistance tests for service installations.
Ducts.
BS EN 15882-3 Extended applications of results from fire resistance tests for service installations.
Penetration seals.
BS EN 15882-4 Extended application of results from fire resistance tests for service installations.
Note: The numbers of British Standards and other documents are those available at the date of this publication. It should also be noted that in a number of cases hybrid references are used for clarity, most are where standards are in a state of transitional change. Users should ensure that they consult with the latest version. The full titles have not always been used.