Glass transition in amorphous water

6.2 Getting Getting out out of of PDMS PDMS

 You will normally leave PDMS directly from t

 You will normally leave PDMS directly from the application module in which you arehe application module in which you are working. You may either save all work done in the current module before leaving or you working. You may either save all work done in the current module before leaving or you may quit directly without updating any databases.

may quit directly without updating any databases.

 All the modules have an

 All the modules have an_ExitExit menu selection; the one shown below being for Design:menu selection; the one shown below being for Design:

If you have made changes prior to selecting

If you have made changes prior to selectingExitExit (and if you have not carried out a(and if you have not carried out a SAVEWORK

SAVEWORK operation), you will be asked if you first wish to save your changes to theoperation), you will be asked if you first wish to save your changes to the appropriate database:

appropriate database:

Clicking

ClickingYESYESat this point would be the equivalent of doing aat this point would be the equivalent of doing aSAVEWORKSAVEWORK (and then a(and then a QUIT

QUIT). If you have done a). If you have done a _{SAVEWORKSAVEWORK} (and made no subsequent changes), or if (and made no subsequent changes), or if youyou have made no changes at all during your Design session, then

have made no changes at all during your Design session, then_ExitExitwill display awill display a message which merely asks you to confirm

message which merely asks you to confirm that you wish to leave that you wish to leave Design:Design:

In every case, when you leave PDMS you will be returned to the operating system at the In every case, when you leave PDMS you will be returned to the operating system at the point from which you

point from which you entered PDMS.entered PDMS.

6.3 Internationalisation 6.3 Internationalisation

Microsoft produces many localised variants of Windows. VANTAGE products are Microsoft produces many localised variants of Windows. VANTAGE products are designed to work in English on all of these, though they do not currently

designed to work in English on all of these, though they do not currently support the usesupport the use of all the

of all the local languages. At the time of local languages. At the time of writing, AVEVA provides limited facilities thatwriting, AVEVA provides limited facilities that vary somewhat between products.

vary somewhat between products.

Users of PDMS need to

Users of PDMS need to enter data (text and names) using their local enter data (text and names) using their local language andlanguage and output the same onto deliverables such as drawings, reports etc. In some cases, there is output the same onto deliverables such as drawings, reports etc. In some cases, there is also a need to localise or translate the user interface. The same data are also required in also a need to localise or translate the user interface. The same data are also required in other products such as VANTAGE Plant Design Review.

other products such as VANTAGE Plant Design Review.

By default, your PDMS project can

By default, your PDMS project can use any language whose characters are containeduse any language whose characters are contained within the

within theLatin-1Latin-1character set, comprising:character set, comprising:

Danish

Danish Dutch Dutch English English FaroeseFaroese Finnish

Finnish French French Icelandic Icelandic IrishIrish Spanish

Spanish German German Norwegian Norwegian PortuguesePortuguese Swedish Italian

Swedish Italian

PDMS can also support the

PDMS can also support the following groups of languages:following groups of languages:

Far Eastern

Far Eastern, comprising:, comprising:

Japanese

Japanese Simplified Simplified ChineseChinese Korean

Korean Traditional Traditional ChineseChinese

Latin-2

Latin-2, comprising:, comprising:

 Albanian

 Albanian Czech Czech English English GermanGerman Hungarian

Hungarian Polish Polish RumanianRumanian Serbo-Croatian

Serbo-Croatian Slovak Slovak SloveneSlovene

Latin-Cyrillic

Latin-Cyrillic, comprising:, comprising:

Bulgarian

Bulgarian Byelorussian Byelorussian EnglishEnglish Macedonian

Macedonian Serbo-Croatian Serbo-Croatian Ukrainian Ukrainian RussianRussian

PDMS does not support any other character set/language, nor

PDMS does not support any other character set/language, nor does it support the mixingdoes it support the mixing of any of the above

of any of the above except except the mixing of one the mixing of one Far Eastern language with English.Far Eastern language with English.

PDMS must know if you

PDMS must know if you are using a non-Latin-1 language in are using a non-Latin-1 language in order to display charactersorder to display characters correctly on drawings.

correctly on drawings.

To use an alternative character set/language:

To use an alternative character set/language:

•

•  You must use an appropriate ve You must use an appropriate version of Windows and a suitable kersion of Windows and a suitable keyboard.yboard.

•

•  You must select the appropriat You must select the appropriate options from the Windows e options from the Windows ,, Regional Options

Regional Options..

For further details, see the PDMS

For further details, see the PDMS Installation Guide Installation Guide , also the PDMS, also the PDMS Admin User Guide  Admin User Guide  for details of font families.

for details of font families.

6.4

6.4 Customisation facilities; Customisation facilities; the the programmable programmable macro macro