Información financiera

Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.

Machines that have been out of service for more than three months must receive the quarterly inspection before they are put back into service.

64 GS^™-1432m • GS^™-1932m • GS^™-1932m Lite Part No. 1308591GT

Model GS-1432m

Height, working outdoor 20 ft 1 in 6.30 m Height, platform outdoor 14 ft 1 in 4.30 m Height, working indoor 20 ft 1 in 6.30 m Height, platform indoor 14 ft 1 in 4.30 m Height, stowed maximum, rails up 6 ft 2 in 1.88 m Height, stowed maximum,

rails folded Platform extension length 24 in 0.60 m Platform dimensions (length x

width)

4 ft 7 in x 30 in

1.40 m x 0.77 m Maximum load capacity 500 lbs 227 kg Maximum wind speed, outdoors 28 mph 12.5 m/s Maximum wind speed, indoors 0 mph 0 m/s Pothole guards deployed

0.75 in 2 cm

Weight 1984 lbs 900 kg

(Machine weights vary with option configurations. See serial label for specific machine weight.)

Power source 2 Batteries, 12V 115AH

System voltage 24V

Maximum hydraulic pressure (functions)

1800 psi 124 bar

Tire size 10 x 3 in 25 x 8 cm

Total vibration value to which the hand/arm system is subjected does not exceed 2.5 m/s².

Highest root mean square value of weighted

acceleration to which the whole body is subjected does not exceed 1.6 ft/s² or 0.5 m/s².

Ambient operating temperature

Minimum -20°F -29°C

Maximum 120°F 49°C

Airborne noise emissions Sound pressure level at ground workstation

<70 dBA

Sound pressure level at platform workstation

<70 dBA

Maximum slope rating, stowed position 25% (14°) Maximum side slope rating, stowed

position

25% (14°)

Note: Slope rating is subject to ground conditions with one person in the platform and adequate traction.

Additional platform weight may reduce slope rating.

Drive speeds Floor loading information, GS-1432m

Tire load maximum 937 lbs 425 kg

Tire contact pressure 143 psi 10 kg/cm² 988 kPa Occupied floor pressure 203 psf 1000 kg/m²

9.73 kPa Note: Floor loading information is approximate and does not incorporate different option configurations. It should be used only with adequate safety factors.

Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation.

Model GS-1932m Height, stowed maximum,

rails folded Platform extension length 24 in 0.6 m Platform dimensions (length x

width)

4 ft 7 in x 30 in

1.40 m x 0.77 m Maximum load capacity 500 lbs 227 kg Maximum wind speed, outdoors 28 mph 12.5 m/s Maximum wind speed, indoors 0 mph 0 m/s Pothole guards deployed

0.75 in 2. cm

Weight 2600 lbs 1179 kg

(Machine weights vary with option configurations. See serial label for specific machine weight.)

Power source 2 Batteries, 12V 115AH

System voltage 24V

Maximum hydraulic pressure (functions)

2400 psi 165.5 bar

Tire size 10 x 3 in 25 x 8 cm

Total vibration value to which the hand/arm system is subjected does not exceed 2.5 m/s².

Highest root mean square value of weighted

Ambient operating temperature

Minimum -20°F -29°C

Maximum 120°F 49°C

Airborne noise emissions Sound pressure level at ground workstation

<70 dBA

Sound pressure level at platform workstation

<70 dBA

Maximum slope rating, stowed position 25% (14°) Maximum side slope rating, stowed

position

25% (14°)

Note: Slope rating is subject to ground conditions with one person in the platform and adequate traction.

Additional platform weight may reduce slope rating.

Drive speeds Floor loading information, GS-1932m

Tire load maximum 1257 lbs 570 kg Tire contact pressure 164 psi 10.13 kg/cm²

1131 kPa Occupied floor pressure 254 psf 1238 kg/m²

12.16 kPa Note: Floor loading information is approximate and does not incorporate different option configurations. It should be used only with adequate safety factors.

Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation.

66 GS^™-1432m • GS^™-1932m • GS^™-1932m Lite Part No. 1308591GT

Model GS-1932m Lite

Height, working outdoor 17 ft 7 in 5.53 m Height, platform outdoor 11 ft 7 in 3.53 m Height, working indoor 24 ft 2 in 7.55 m Height, platform indoor 18 ft 2 in 5.55 m Height, stowed maximum, rails up 6 ft 5 in 1.97 m Height, stowed maximum,

rails folded Platform extension length 24 in 0.6 m Platform dimensions (length x

width)

4 ft 7 in x 30 in

1.40 m x 0.77 m Maximum load capacity 500 lbs 227 kg Maximum wind speed, outdoors 28 mph 12.5 m/s Maximum wind speed, indoors 0 mph 0 m/s Pothole guards deployed

0.75 in 2. cm

Weight 2066 lbs 937 kg

(Machine weights vary with option configurations. See serial label for specific machine weight.)

Power source 2 Batteries, 12V 115AH

System voltage 24V

Maximum hydraulic pressure (functions)

2400 psi 165.5 bar

Tire size 10 x 3 in 25 x 8 cm

Total vibration value to which the hand/arm system is subjected does not exceed 2.5 m/s².

Highest root mean square value of weighted

acceleration to which the whole body is subjected does not exceed 1.6 ft/s² or 0.5 m/s².

Ambient operating temperature

Minimum -20°F -29°C

Maximum 120°F 49°C

Airborne noise emissions Sound pressure level at ground workstation

<70 dBA

Sound pressure level at platform workstation

<70 dBA

Maximum slope rating, stowed position 25% (14°) Maximum side slope rating, stowed

position

25% (14°)

Note: Slope rating is subject to ground conditions with one person in the platform and adequate traction.

Additional platform weight may reduce slope rating.

Drive speeds Floor loading information, GS-1932m XH

Tire load maximum 1069 lbs 485 kg Tire contact pressure 168 psi 11.83 kg/cm²

1159 kPa Occupied floor pressure 210 psf 1026 kg/m²

10.05 kPa Note: Floor loading information is approximate and does not incorporate different option configurations. It should be used only with adequate safety factors.

Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation.

GS™-1432m • GS™-1932m • GS™-1932m Lite Part No. 1308591GT Operator's Manual First Edition • First Printing