Informe técnico del proyecto industrial

BS 4 Structural steel section BS 4 Pt.1:1993 Specification for hot rolled sections

BS 78 Specification for cast iron spigot and socket pipes (vertically cast) and spigot and socket fitting BS 143 Specification for malleable cast iron and cast copper alloy threaded pipe fittings

BS 402 Clay roofing tiles and fittings BS 410 Specification for test sieves

BS 416 Discharged and ventilating pipes and fittings, sand-cast or spun in cast iron BS 417 Pt.2:1987 Metric units

BS 437:1978 Specification for cast iron spigot and socket drain pipes and fittings BS 476 Fire test on building materials and structures

BS 544:1969 (1994) Specification for linseed oil putty for use in wooden frame BS 638 Arc welding power sources, equipment and accessories BS 638 Pt.4:1996 Specification for welding cables

REFERENCE TITLE

BS 864 Pt.2:1983 Specification for capillary and compression fittings for copper tubes BS 1052:1980(1986) Specification for mild steel wire for general engineering purposes

BS 1091:1963(1980) Specification for pressed steel gutters, rain water pipes, fittings and accessories BS 1142:1989 Specification for fibre building board

BS 1191 Specification for gypsum building plaster BS 1212 Float operated valves

BS 1224:1970 British standard specification for electroplated coating of nickel and chromium BS 1230 Pt.1:1985 Specification for plasterboard excluding materials submitted to secondary operations

(1994)

BS 1305 Specification for batch type concrete mixers

BS 1369 Steel lathing for internal plastering and external rendering

BS 1370:1979 Specification for low heat portland cement

BS 1377 Methods of test for soil for civil engineering purposes

BS 1387:1985 (1990) Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads

BS 1449 Pt.2:1983 Specification for stainless and heat-resisting steel plate, sheet and strip BS 1452:1990 Specification for flake graphite cast iron

BS 1474:1987 Specification for wrot aluminium and aluminium alloys for general purposes: bars, extruded round tubes and sections

BS 1552:1995 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar BS 1564:1975(1983) Specification for pressed steel sectional rectangular tanks

BS 1615:1987(1994) Method for specifying anodic oxidation coatings on aluminium BS 1881 Pt.101:1983 Method of sampling fresh concrete on site

Pt.102:1983 Method of determination of slump

Pt.103:1983 Method of determination of compacting factor Pt.104:1983 Method of determination of vebe time

Pt.106:1983 Method of determination of air content of fresh concrete Pt.107:1983 Method of determination of density of compacted fresh water Pt.108:1983 Method for making test cubes from fresh concrete

Pt.111:1983 Method of normal curing test specimen (20ΕC)

Pt.116:1983 Method of determination of compressive strength of concrete cube Pt.124:1988 Methods for analysis of hardened concrete

Pt.125:1986 Method of mixing and sampling fresh concrete in the laboratory Pt.201:1986 Guide to the use of non-destructive methods of test for hardened concrete BS 2494:1990 Specification for elastomeric seals for joints in pipework and pipelines BS 2499 Hot-applied joint sealant systems for concrete pavements

BS 2499 Pt.1:1993 Specification for joint sealants.

REFERENCE TITLE

BS 2600 Radiographic examination of fusion welded butt joints in steel

BS 2872:1989 British standard specification for copper and copper alloy forging stock and forgings

BS 2874:1986 British standard specification for copper and copper alloy rods and sections (other than forging stock) BS 2910:1986 Methods for radiographic examination of fusion welded circumferential butt joints in steel pipes

BS 2989:1991 Specification for continuously hot-dip zinc coated and iron-zinc alloy coated steel of structural qualities: wide strip, sheet/plate and slit wide strip

BS 3100:1991 Specification for steel casting for general engineering purposes BS 3260:1969(1996) Specification for semi-flexible PVC floor

BS 3416:1991 Specification for bitumen-based coating for cold application suitable for use in contact with portable water BS 3923 Pt.1:1986 Method for manual examination of fusion welds in ferritic steels

Pt.2:1972 Automatic examination of fusion welded butt joints in ferritic steels

BS 3987:1991(1997) Specification for anodic oxidation coatings on wrought aluminium for external architectural applications BS 4027:1996 Specification for sulphate-resisting portland cement

BS 4127:1994 Specification for light gauge stainless steel tubes, primarily for water application BS 4190 Specification for ISO Metric Black Hexagon Bolts, Screws & Nuts

BS 4254:1983(1991) Specification for two part polysulphide-based sealants

BS 4320:1968 Specification for metal washers for general engineering purposes, Metric series BS 4360:1986 Specification for weldable structural steel

BS 4368 Pt.4:1984 Specification for compression coupling for tubes Pt.4: Specification for type test requirements

BS 4395 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering BS 4449:1988 Specification for carbon steel bars for the reinforcement of concrete

BS 4461 Specification for cold worked steel bars for the reinforcement of concrete

BS 4466:1989 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete BS 4570:1985 Specification for fusion welding of steel castings

BS 4576 Pt.1:1970 Specification for unplasticised pvc rain water goods Pt.1: Half round gutters and circular pipe BS 4604 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series BS 4848 Hot-rolled structural steel sections

BS 4848 Pt.2:1991 Specification for hot-finish hollow sections

BS 4872 Pt.1:1982 Specification for approval testing of welders when welding procedure approval is not (1995) required BS 5082:1993 Specification for water-borne priming paints for woodwork

BS 5135:1984 Specification for arc welding of carbon and carbon manganese steels

BS 5154:1983 Specification for copper alloy globe, globe stop and check, check and gate valves BS 5268 Specification for structural use of timber

BS 5268 Pt.2:1991 Code of practice for permissible stress, design, materials and workmanship Pt.3:1985 Code of practice for trussed rafter roofs

BS 5292 Specification for jointing materials and compounds for installation using water, low pressure steam or 1st_{2 & 3} family gases

REFERENCE TITLE

Pt.2:1990 Methods for specifying concrete mixes.

Pt.3:1990 Specification for the procedures to be use in producing and transporting concrete.

Pt.4:1990 Specification for the procedures to be use in sampling, testing and assessing compliance of concrete. BS 5358:1993 Specification for solvent-borne priming paint for woodwork

BS 5606:1978 Code of practice for accuracy in building. BS 5606:1990 Guide to accuracy in building

BS 5629 Pt.2:1979 Test methods

Pt.3:1979 Method for specifying requirements for individual materials BS 5950 Structural use of steelwork in building

BS 5950 Pt.1:1990 Codes of practice for design in simple and continuous construction: hot rolled sections Pt.2:1992 Specification for materials, fabrication and erection: hot rolled section

Pt.3: Section 3.1:1990 Code of practice for design of simple and continuous composite beams Pt.4:1994 Code of practice for design of composite slab with profiled steel sheeting Pt.5:1987 Code of practice for design of cold formed sections

Pt.6:1995 Code of practice for design of light gauge profiled steel sheeting Pt.7:1992 Specification for materials and workmanship: cold formed section Pt.8:1990 Code of practice for fire resistant design

Pt.9:1994 Code of practice for stressed skin design BS 5975 Code of practice for falsework

BS 5979:1993 Code of practice for remote centres for alarm systems BS 6089:1981 Guide to assessment of concrete strength in existing structures BS 6363:1983 Specification for welded cold formed steel structural hollow sections BS 6431 Ceramic floor and wall tiles

BS 6477:1992 Specification for water repellents for masonry surfaces BS 6510:1984 Specification for steel windows, sills, window boards and doors BS 6675:1986 Specification for servicing valves (copper alloy) for water services

BS 6699:1992 Specification for ground granulated blast-furnace slug for use with portland cement

BS 6920 Suitability of non-metallic product for use in contact with water intended for human consumption with regard to their effect on the quality of water

BS 7668:1994 Specification for weldable structural steel. Hot finished structural hollow section in weather resistant steels BS 8004:1986 Code of practice for foundation

BS 8007:1987 Code of practice for design of concrete structures for retaining aqueous liquids BS 8110 Structural use of concrete

BS 8110 Pt.1:1985 Code of practice for design and construction

BS 8215:1991 Code of practice for design and installation of damp-proof courses in masonry construction

BS EN 499:1995 Welding consumables. covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification

REFERENCE TITLE

BS EN 876:1995 Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints BS EN 895:1995 Destructive tests on welds in metallic materials. Transverse tensile test

BS EN 910:1996 Destructive tests on welds in metallic materials. Bend tests

BS EN 10029 Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3mm thick or above BS EN 10143 Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape

BS EN 10147 Continuously hot-dip zinc coated structural steel sheet and strip-technical delivery conditions BS EN 1043-1:1996 Hardness test on arc welded joints

BS EN 10051:1992 Specification for continuously hot-rolled un-coated plate. sheet and strip of non-alloy and alloy and alloy steels. Tolerances on dimensions and shape

BS EN 1057:1996 Specification for copper pipes

BS EN 10025:1995 Hot rolled products of non-alloy structural steel. Technical delivery conditions BS EN 10113:1991 Hot-rolled products in weldable fine grain structural steels

Pt.1:1993 General delivery condition

Pt.2:1993 Delivery conditions for normalized/normalized rolled steels Pt.3:1993 Delivery conditions for thermomechanical rolled steels BS EN 10137-1:1996 General delivery conditions

-2:1996 Delivery conditions for quenched and tempered steels

-3:1996 Delivery conditions for precipitation hardened steels

BS EN 10155:1993 Structural steel with improved atmospheric corrosion resistance. Technical delivery conditions BS EN 10210-1:1994 Technical delivery requirements

BS EN 50078:1994 Torches and guns for arc welding BS EN 60974-11:1996 Electrode holders

EN 10113 Hot-rolled products in weldable fine grain structural steels.

EN 10155 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions EN 12201 Specification for polyethelene (PE) piping system for water supply

EN 12319 Pt.1, 2, 3 Specification for plastic piping systems for hot and cold water - polybutylene (PB) , 5 & 7

REFERENCE TITLE