Infraestructura existente

The second wizard screen varies depending on what mode and encapsulation type you use. All screens shown are with routing mode. Configure the fields and click Next to continue.

Figure 3-2 Internet Connection with PPPoE

Prestige 660R ADSL 2+ Access Gateway

Wizard Setup 3-7

The following table describes the fields in this screen.

Table 3-2 Internet Connection with PPPoE

LABEL DESCRIPTION

Service Name Type the name of your PPPoE service here.

User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form

user@domain where domain identifies a service name, then enter both components exactly as given.

Password Enter the password associated with the user name above.

IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;

the ISP assigns you a different one each time you connect to the Internet. The Single User Account feature can be used with either a dynamic or static IP address.

Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise select Static IP Address and type your ISP assigned IP address in the IP Address text box below.

Connection Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects Connection on Demand with 0 as the idle time-out, which means the Internet session will not timeout.

Select Nailed-Up Connection when you want your connection up all the time. The Prestige will try to bring up the connection automatically if it is disconnected.

The schedule rule(s) in SMT menu 26 has priority over your Connection settings.

Network Address Translation

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter for more details.

Back Click Back to go back to the first wizard screen.

Next Click Next to continue to the next wizard screen.

Prestige 660R ADSL 2+ Access Gateway

3-8 Wizard Setup

Figure 3-3 Internet Connection with RFC 1483 The following table describes the fields in this screen.

Table 3-3 Internet Connection with RFC 1483

LABEL DESCRIPTION

IP Address This field is available if you select Routing in the Mode field.

Type your ISP assigned IP address in this field.

Network Address Translation

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter for more details.

Back Click Back to go back to the first wizard screen.

Next Click Next to continue to the next wizard screen.

Prestige 660R ADSL 2+ Access Gateway

Wizard Setup 3-9

Figure 3-4 Internet Connection with ENET ENCAP The following table describes the fields in this screen.

Table 3-4 Internet Connection with ENET ENCAP

LABEL DESCRIPTION

IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. The Single User Account feature can be used with either a dynamic or static IP address.

Select Obtain an IP Address Automatically if you have a dynamic IP address;

otherwise select Static IP Address and type your ISP assigned IP address in the IP Address text box below.

Subnet Mask Enter a subnet mask in dotted decimal notation.

Refer to the IP Subnetting appendix to calculate a subnet mask If you are implementing subnetting.

ENET ENCAP Gateway

You must specify a gateway IP address (supplied by your ISP) when you use ENET ENCAP in the Encapsulation field in the previous screen.

Prestige 660R ADSL 2+ Access Gateway

3-10 Wizard Setup

Table 3-4 Internet Connection with ENET ENCAP

LABEL DESCRIPTION

Network Address Translation

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter for more details.

Back Click Back to go back to the first wizard screen.

Next Click Next to continue to the next wizard screen.

Figure 3-5 Internet Connection with PPPoA The following table describes the fields in this screen.

Prestige 660R ADSL 2+ Access Gateway

Wizard Setup 3-11

Table 3-5 Internet Connection with PPPoA

LABEL DESCRIPTION

User Name Enter the login name that your ISP gives you.

Password Enter the password associated with the user name above.

IP Address This option is available if you select Routing in the Mode field.

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;

the ISP assigns you a different one each time you connect to the Internet. The Single User Account feature can be used with either a dynamic or static IP address.

Click Obtain an IP Address Automatically if you have a dynamic IP address; otherwise click Static IP Address and type your ISP assigned IP address in the IP Address text box below.

Connection Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects Connection on Demand with 0 as the idle time-out, which means the Internet session will not timeout.

Select Nailed-Up Connection when you want your connection up all the time. The Prestige will try to bring up the connection automatically if it is disconnected.

The schedule rule(s) in SMT menu 26 has priority over your Connection settings.

Network Address Translation

This option is available if you select Routing in the Mode field.

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter for more details.

Back Click Back to go back to the first wizard screen.

Next Click Next to continue to the next wizard screen.