Artículo 67.- Política Ambiental
2.3. BASES TEÓRICAS
2.3.10. Lagunas de estabilización
custom common
setting INITIAL FUNCTION
AUTO CLEAR SETTING
SYSTEM DIFF SIZE ORIGINAL AUDIBLE TONES DRAWER ELIGIBILITY FOR APS/ADS TRACINGPAPER CASETTE SETTINGS STORE SPECIAL CASETTE STACK BYPASS SIZE ENTRY TRAY PRINTING PRIORITY ENERGY SAVER MODE INCH ENTRY SET SYSTEM SETTING PASSWORD RESTRICT USE OF FAX WITH CONTROL CARD
Use it to select the Initial screen, which comes up when the power is turned on. (copier*/fax) Use it to enable or disable the display of the Initial screen after auto clear. (enable*/disable)
Use it to enable or disable the placement of originals of different sizes (sub feeding direction) in the feeder. (on*/off)
Use it to enable or disable the buzzer sound. (on for input, warning, job end)
COPY/FAX/PRINTER (Stack Bypass: ON, OFF* Drawers: ON*, OFF)
Use it to enable/disable cassette auto select for each cassette. (for copier, fax, printer; multifeeder on/off*; cassette on*/off)
Use it to set a paper size and paper icon for the
special cassette. Setting the thick paper icon will turn on thick paper mode for transfer bias and fixing control.
SPC1, SPC2: A4 SPC3, SPC4: LTR
Use it enable or disable size input. off*: input of size as needed.
on: input of size upon placement of paper in the multifeeder.
Use it to assign the multi tray and finisher special tray to a function:
Multifeeder
tray A: copier; tray B: fax, tray C: not set finisher
tray A: not set; tray B: fax
Use it to assign priority (1, 2, 3) for printing when a sorter is installed.
copier: 1; fax: 2; printer: 3 (1, 2, 3 representing priority)
Use it to set the level of power save mode. -10% mode, -25% mode, -40% mode; no recovery time
Use it to enable or disable the display of the Inch key for screens. (on/off*)
Use it to set an ID for system control. (4-digit number) Use it to enable or disable restriction on fax users by means of control cards (accessory). (on/off*) * Initial setting.
INITIAL SCREEN FOR EXPANDED FUCTIONS DEPT. ID MANAGEMENT INITIALIZE CUSTOM COMMON SETTINGS
MAIL BOX*, OTHER
Use it to enable or disable ID control by group. (using a 4-digit number for each group for count control) Use it to initialize common settings to factory settings. (yes/no)
timer settings date/time setting
auto sleep time auto clear time time until unit quiets down
weekly timer
Use it to set the current date and time.
Use it to set the time after which sleep state starts at the end of operation and turning off the control panel power switch. (30 min to 24 hr; 2 hr*)
Use it to set the time after which the Copier/FAX Initial screen returns to the touch panel at the end of operation. Use it to set the time after which the machine sound is stopped at the end of a copy run or key operation. (0 to 9 min; 1*)
Use it to set the time at which the control panel power switch is turned off by the day of the week. (no setting) custom copy
settings standard key 1 setting
standard key 2 setting auto orientation auto collate photo mode standard settings initialize custom common setting
Use it to set the Preference key for the Initial screen. Select from the mode keys on the Extended mode screen and the memory keys from the mode memory. Use it to set the Preference key for the Initial screen. Select from the mode keys on the Extended mode screen and the memory keys from the mode memory. Use it to enable or disable automatic rotation of an image based on original size and copy ratio for printing on paper of a selected size. (on*/of) Use it to enable or disable switching to sort mode automatically when an original is placed in an RDF (operates in conjunction with sorter and RDF). (on*/off) Use it to enable or disable photo mode. (on*/off) Use it to enable switching copying modes stored in memory for standard modes. (enable/disable) standard: combination of modes set at power-on or a
press on the Reset key.
(copy count: 1; paper select: auto; density/image: auto) Use it to initialize copy setting to factory settings. (yes/no) * Initial setting.
adjustment/
cleaning zoom fine adjustment
exposure recalib feeder cleaning roller cleaning repositioning staples for saddle sticher unit saddle sfich position adjustment
Use it to correct minute discrepancies between original and copy sizes for vertical and horizontal directions.
adjustment range: -1.0% to +1.0%
unit: 0.1%
Use it to adjust copy density for copier made of a typical original (without dirt or fogging) with the density memory at center.
Use it to clean the pick-up roller assembly by moving copy paper inside the feeder.
Use it to clean the roller assembly (if copies are soiled). Use it to edge out several staples by feeding paper to the middle stapling unit after removing a staple jam. Use it to correct minute discrepancies in middle stapling positions when making copies for a booklet (operating in conjunction with a saddle finisher).
* Initial setting. image server
V. ROUTINE MAINTENANCE BY THE USER
Be sure to instruct the user to perform the following once a week: 1) Wipe the copyboard glass with a moist cloth, and then dry wipe it.2) Wipe the copyboard cover/DADF feeding belt with a cloth moistened with mild detergent solution, and then dry wipe it.
Instruct the user to perform the following if image faults (e.g., vertical white spots) occur: 1) Execute charging roller/transfer roller cleaning in user mode.