Hasta de 150 $5,468.00 Sin excedente adicional
MÁS EL VALOR DEL INMUEBLE
MSDS Number : 0916601 Revision : 01 Date : 15.06.2009
1. Product Identification and Company
Product Name Jain PE Pipes
Manufacturer Jain Irrigation Systems Ltd.
Jain Plastic Park , N.H.6, Bambhori Jalgaon 425 001 (India)
Application • Water Transmission, Distribution & House Service Connection •
Sewerage, Drainage & Effluent Disposal • Natural Gas Distribution • OFC Ducting; Power Cable Ducting • Raw Water Intake / Outfall Lines •
Dredging • Slurry & Sludge Transport • Fire Hydrant Systems • Landfill Lechate Gas Extraction.
Chemical Family / Classification Polyolefin
CAS No. Not applicable - Mixture
Formula Proprietary
Emergency Telephone number + 91 257 2258011 / 22
2. Composition / Information on Ingredients
Product is made from polyethylene polymer and other required additives. Does not contain any substances which are classified as Hazardous under normal processing conditions.
3. Physical and Chemical Properties
Physical Form Solid
Colour Black / other colours as specified
Odor Odourless
Boiling Point Not Applicable
Melting Point 115 – 140°C
Freezing Point Not Applicable
Solubility in Water None
Specific Gravity > 0.9 ( Water = 1)
Vapor Density Not applicable (Air > 1)
Evaporation Rate None (Butyl Acetate = 1)
Vapor Pressure Not applicable
% Volatile None
pH Not Applicable
Material Safety Data Sheet
MSDS Number : 0916601 Revision : 01 Date : 15.06.2009
4. Fire Hazard Data and Fighting methods
Flash Ignition Temperature About 335° C
Auto Ignition Temperature About 350° C
Extinguishing Media Dry chemical, foam water, water spray (fog) or carbon dioxide. Do not use water jet.
Special Fire Fighting Procedure In the event of fire, wear NIOSH approved, positive pressure self-contained breathing apparatus (SCBA), Full protective clothing. Evacuate all personnel from danger area. If protective equipment is not available fight fire from a protected location or safe distance.
Hazardous Combustion Products Main gases evolved, but not limited to, during combustion are carbon dioxide and carbon monoxide.
In case of Fire Extinguishing media : Water, Foam, Carbon Dioxide, Chemical Powder
Special Procedure : Avoid water jet initially to restrict flying of flame Unusual hazard : None
5. Human Health Data
Emergency Overview During a Fire Emergency
Primary Route(s) of Exposure x Inhalation o Ingestion x Eye x Skin Contact Potential Health Effects and Symptoms of Over-Exposure
During a fire emergency, when this product is burned, it may generate smoke.
Eye Contact Smoke from a fire emergency may cause eye irritation. Flush eyes with water
thoroughly for several minutes. If effects occur consult a physician.
Skin Contact After contact with molten polymer cool rapidly with cold water. Do not
attempt to pull / remove solidified product away from the skin. Seek medical advice immediately.
Inhalation Smoke from a fire emergency may cause respiratory irritation. Move person to
fresh air. If effects occur seek medical advice.
Ingestion Unlikely.
Medical Conditions Aggravated by Over-Exposure
At room temperature the material is not irritant and does not liberate dangerous fumes.
Available toxicological information and the physical/chemical properties of the material suggest that there is no evidence that this product aggravates an existing medical condition.
Material Safety Data Sheet
MSDS Number : 0916601 Revision : 01 Date : 15.06.2009
Eye Contact Immediately flush eyes with water for at least 15 minutes.
Do not rub the eyes. If irritation develops, consult a physician.
Skin Contact Under normal conditions will not pose any problem.
If burned by molten plastics, get medical attention immediately
Inhalation If smoke from burning plastics is inhaled, move to fresh air immediately.
If symptoms develop, seek immediate medical attention.
Ingestion Unlikely. If swallowed seek medical attention. Seek medical attention
immediately. Do not induce vomiting unless directed to do so by medical personnel.
Notes to Physician Treat symptomatically and supportively
7. Handling and Storage
Read and observe all precautions on product label / technical bulletin or catalogue or product literature. Store in accordance with good manufacturing practices. During usage observe for any air leaks, bumps, thumps, rattles, squeals or unusual sounds, smell like burning insulation, hot oil or problem with wiring and cables, hydraulic connections and if found any thing unusual take appropriate corrective action.
8. Stability and Reactivity
Conditions to avoid Exposure to elevated temperature can cause the product to decompose.
Stability Stable
Hazardous Decomposition Will not occur in normal circumstances / condition. 9. Toxicological Information
Chronic Toxicity
Carcinogenic Effects Not identified as carcinogen by ACGIH, the International Agency for Research on Cancer (IARC) or the European Commission (EC).
Mutagenic Effects Not classified as mutagen by established regulatory criteria.
Reproductive Effects Not classified as reproductive toxin by established regulatory criteria. Developmental and Teratogenic Effects Not classified as teratogenic or embryotoxic by established regulatory
criteria. 10. Ecological Information
Product not considered as dangerous for the environment. 11. Disposal consideration
Product can be recycled after the intended use. Disposal shall be in accordance with applicable local and national regulation.
12. Other Information
The Product is not dangerous according to the Domestic and International Regulations, Currently in Force, Concerning Road, Rail, Maritime and Air Transportation.
This information is furnished without warranty, expressed or implied except that it is accurate to the best knowledge of Jain Irrigation Systems Ltd., neither Jain Irrigation Systems Ltd., nor any of its subsidiaries assume any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Jain Irrigation Systems Ltd., assumes no legal responsibility for loss, damage or expense arising out of, or in any way connected with the handling, storage, use or disposal of this product.