Método de análisis de datos

The Content Center Library setting defines the library where you want the part to belong to. Parts can only be published to libraries that have Read/Write permission.

To publish authored parts to specified categories, you can create new subcategories within the default category, specify category parameters, and then publish new subcategories to the active library. The new category inherits all parameters from the parent category. Inherited parameters are displayed in the Category Parameters dialog box, and cannot be edited. In addition to the inherited parameters, you can create new category

parameters.

When publishing authored parts, you must map the part parameters to the category parameters. The information you provide to define the part sets the structure for its location in Content Center Library, provides a base for the part file name and makes the part attributes available for future queries.

Publish Part tool

In the exercises that follow, you use the Publish Part tool to add authored union, pipe, 45-degree elbow, and 90-degree elbow iParts to CustomLibrary you created in the previous exercise. For detailed instructions about configuring a library, see “Configuring Content Center Libraries” on page 91.

NOTE If you need to use published parts to define tube and pipe styles, you must specify the Standards Organization and Standard family properties during publishing. They are the key style criteria to filter out library parts in the Tube &

Pipe Styles dialog box.

Union iPart

In this exercise, you publish the authored union iPart to CustomLibary.

To publish the authored union iPart

1 Open the JIS_B_2301_MaleFemaleUnionTypeFClassI.ipt part you previously authored.

2 On the Tools menu, click the Publish Part tool.

In the Publish dialog box, the Tube & Pipe ➤ Fittings ➤ Unions category is selected by default.

3 In the Libraries panel or list, select CustomLibrary.

4 To add a new subcategory under Unions, click the New Category tool on the toolbar of the Publish dialog box.

5 Name the new category Custom JIS Components.

The empty Custom JIS Components subcategory is added as shown in the following image.

6 To publish a part family, on the toolbar of the Publish dialog box, click the Family Properties tool.

Alternatively, you can click the arrow next to the Tools menu, and then select Family Parameters.

In the Family Properties dialog box, you can enter the naming and standard information, mapping parameters, and preview the published union image.

Publishing to Content Center

|

Naming:

Family Name: JIS_B_2301_MaleFemaleUnionTypeFClassI Description: Custom male and female union

Standard:

Standard Organization: JIS

Manufacturer: SampleUnionCompany Standard: JIS B 2301

Standard Revision: 1

8 In the Family Properties dialog box, Parameters tab, set the mapping between category parameters and part parameters.

9 In the Family Properties dialog box, Preview tab, verify the publish language, family name, description, and category path.

10 Click OK.

The Publish dialog box displays the family name you specified.

11 In the Publish dialog box, click Publish.

12 When the Publish Result dialog box prompts the successful publish, click OK.

When processing is completed, the part is added to the CustomLibrary, Tube

& Pipe, Fittings, Unions, Custom JIS Components category.

13 Close the Publish dialog box, and close the part file.

You can navigate to the published union part family using the Content Center tool and practice using the i-drop functionality to place it in a sample model or model of your choice.

Pipe iPart

In this exercise, you publish the authored pipe iPart to CustomLibrary.

1 Open the pipe.ipt part you previously authored.

2 On the Tools menu, click the Publish Part tool.

In the Publish dialog box, the Tube & Pipe ➤ Pipes category is selected by default.

3 In the Libraries panel or list, select CustomLibrary to publish.

4 In the Pipes category, add a new subcategory named Custom.

5 Click the Family Properties tool.

6 In the Family Properties dialog box, General tab, specify:

7 In the Family Properties dialog box, Parameters tab, set the mapping between category parameters and part parameters.

8 In the Family Properties dialog box, Preview tab, verify the publish language, family name, description, and category path.

9 Click OK.

10 In the Publish dialog box, click Publish.

11 When the Publish Result dialog box prompts the successful publish, click OK.

12 Close the Publish dialog box, and close the part file.

Elbow iPart

Use the skills you just learned to publish the 45-degree and 90-degree elbow iParts.

To publish the 45-degree elbow iPart

1 Repeat the steps above to publish the 45-degree elbow iPart to CustomLibrary.

Use Tube & Pipe ➤ ^Fittings ➤ ^Elbows ➤ Custom as the category path.

2 In the Family Properties dialog box, General tab, specify:

Naming:

Publishing to Content Center

|

part parameters.

4 On the Preview tab, verify the publish language, family name, description, and category path.

5 Click OK.

6 On the Publish dialog box, click Publish.

7 When the Publish Result dialog box prompts the successful publish, click OK.

8 Close the Publish dialog box, and close the part file.

To publish the 90-degree elbow iPart

1 Repeat the steps to publish the 90-degree elbow iPart to CustomLibrary.

Use Tube & Pipe ➤ Fittings ➤ Elbows ➤ Custom as the category path.

2 In the Family Properties dialog box, General tab, specify:

Naming:

Family Name: 90LongElbow

Description: Butt Weld 90 Long Elbow Standard:

Standards Organization: SampleStandardsOrganization Manufacturer: SamplePipeCompany

Standard: SampleStandard Standard and Revision: 1

3 On the Parameters tab, set the mapping between category parameters and part parameters.

4 On the Preview tab, verify the publish language, family name, description, and category path.

5 Click OK.

6 On the Publish dialog box, click Publish.

7 When the Publish Result dialog box prompts the successful publish, click OK.

8 Close the Publish dialog box, and close the part file.