Las mujeres en el seno del matrimonio

Fields Description

SYSTEM ATTRIBUTES

System Prime Time Start The start time, in hours and minutes, for the prime time interval.

This is usually the time that your company opens for business. The default is 08:00.

System Prime Time End The end time, in hours and minutes, for the prime time interval.

This is usually the time that your company closes for business. The default is 17:00.

Maximum Simultaneous LDAP Directory Update Sessions

The maximum number of simultaneous LDAP sessions that the system allows during a full remote update.

When the system reaches the maximum, you cannot request a full remote update until one of the sessions finishes. The default is 100. The range is 0 to 100.

IMAP4 TUI Password The password used for the IMAP4 communication between systems.

Confirm IMAP4 TUI Password A confirmation of the password you enter in the IMAP4 TUI Password field.

Default Internet Subscriber Community Do not use this field.

Privacy Enforcement Level If the sender marks a message as private, then the recipient cannot forward the message from the TUI. The options are:

•Voice: Enforces privacy from the TUI. •Email: Requests that the recipient keeps

the message private.

For Exchange message stores, the privacy enforcement level must be Email.

Automatic Mail Forwarding For Exchange message stores, the value must be yes.

RESCHEDULING INCREMENTS FOR FULL MAILBOX DELIVERY

Increment fields The intervals in days, hours, and minutes that the system waits to attempt to resend messages that the system could not deliver

Fields Description

on the previous attempt due to a full mailbox.

When the system uses the specified last increment, the message is marked as non- deliverable. You can specify a maximum of 10 rescheduling increments.

SYSTEM TCP/IP PORTS

LDAP Port The state of the primary LDAP port. You cannot change the primary port number. The options are:

•Disabled: Disables authenticated and anonymous access for the corporate LAN.

•Authenticated Only : Authenticates access and disables anonymous access on the corporate LAN.

•Authenticated or Anonymous: Authenticates access or anonymous access on the corporate LAN. Changing the state of the LDAP port temporarily interrupts the corporate LAN access to LDAP.

LDAP SSL Port The port number for the LDAP SSL port. The default is 636.

If you change the port number, you must restart the system.

LDAP Front End Alternate Port An optional, secondary port for LDAP. When you enter a port number, the system automatically enables the port.

The default is blank. If you change the port number, you must restart the system.

LDAP Directory Update Port The port that the directory update LDAP server uses. The default is 56389.

IMAP4 TUI Port You cannot change the status of this port. The port is disabled and the port number is 55143.

IMAP4 Port The port that the IMAP4 server uses for IMAP4 communication with remote clients. If you select Enabled, enter the port number that the IMAP4 server uses.

Fields Description

IMAP4 SSL Port The port that the IMAP4 server uses for IMAP4 SSL communication with remote clients.

If you select Enabled, enter the port number that the IMAP4 server uses. The default is 993.

POP3 Port The port that the POP3 server uses for POP3 communication with remote clients. The options are:

•Enabled: Allows the use of POP3 clients for email messaging.

•Disabled: Blocks POP3 email client access to the messaging server.

If you select Enabled, enter the port number that the POP3 server uses for POP3 communication with remote clients. The default is 110.

POP3 SSL Port The port that the POP3 server uses for POP3 SSL communication with remote clients. The options are:

•Enabled allows POP3 clients to use the POP3 SSL port for more secure access. •Disabled blocks POP3 SSL client access. If you select Enabled, enter the port number that the POP3 server uses for POP3 SSL communication with remote clients. If you enable POP3 SSL, users must configure their email clients to use SSL. The default is 995.

SMTP Port The port that the SMTP server users for SMTP communication with remote clients. If you select Enabled, enter the port number that the SMTP server uses. The default is 25. Disabling this port only disables access to the public LAN. If you change the port number, you must restart the system.

SMTP Alternate Port The port that the SMTP server uses for SMTP communication with remote clients. Use this additional port on the public network instead of the traditional SMTP port. The system automatically enables this port when you enter a port number. The default is blank.

Fields Description

SMTP SSL Port The port that the SMTP server uses for SMTP SSL communication with remote clients.

If you select Enabled, enter the port number that the SMTP server uses for SMTP SSL communication. The default is 465. If you change the port number, you must restart the system.

If you enable SMTP SSL, users must configure their email clients to use SSL.

Allow TLS for Outgoing SMTP Outgoing SMTP attempts to use Transport Layer Security (TLS) to encrypt the SMTP conversation.

MCAPI Port The port that the MCAPI server uses. The default is 55000. If you change the port number, you must restart the system.