Origen de la Santería

Screw compressors with refrigerated drier & air filter

Moisture and oil – free compressed air for

Sejal is well equipped today to provide most appropriate solutions to meet specific glazing requirements of visibility, safety, security, thermal and acoustic insulation in architectural, decorative, industrial, transport and various other market segments.

SEJAL L I T E Standard clear, body tinted, reflective – solar and high performance coated, low-emissivity single glazing.

Kool G l a s s Insulating Glass Unit with standard and high performance glazing for sun control, UV control, for thermal insulation. This range of glazing helps in greatly reducing the heat transfer into conditioned space by 19 to 84% approx. thus resulting in considerable savings in energy

consumption and operating costs.

Tone G l a s s Insulating Glass Unit for acoustic insulation with different sound characteristics. Sound attenuations up to 50 db can be achieved. The units could also be configured with high performance glasses to achieve thermal insulation with acoustic insulation.

Solid G l a s s Tempered Glass for enhanced thermal shock resistance, strength and safety. SEJAL TUFF heat strengthened (HS) glasses are recommended for thermal shock resistance and strength. Whereas, SEJAL TUFF fully toughened (FT) glasses are classified as safety glass and most suitable where human safety is of primary concern besides thermal shock

resistance and strength. The risk of injury is minimal since SEJAL TUFF (FT) glass breaks into very small, blunt fragments upon heavy impact.

As compared to conventional annealed glass SEJAL TUFF (HS) has twice and SEJAL TUFF (FT) has four times the strength.

Armour G l a s s Laminated Glass for safety glazing applications. Our present range of safety, laminated glasses include cast-in-place resin laminated glasses with one or more inter-layers to provide the required level of safety.

When broken, the glass fragments do not become free and remain attached to the interlayer thus reducing the risk of human injury.

Fort G l a s s Laminated Glass for security glazing applications. These glasses are specifically configured with alternating layers of glass and PVB /

cast-in-place resin. The configuration of the built-up glass decides the level of security (resistance to forced entry, bullets, explosions etc.).

Decor G l a s s Range of decorative glass for interiors like furniture, wall panels, ceiling panels, decorative mirrors, design glasses with sand blasting, air

brushing, chemical etching, engraving etc.

Sejal working systems....

Enquiry and order processing

Enquiries and orders received are recorded as and when they are received. Subsequently they are passed on to the Sales Support Cell, which is adequately staffed with technical and

commercial personnel for scrutiny and evaluation. If found okay the quotations are forwarded to parties in response to the enquiries and in the case of orders work orders are raised and forwarded to factory for execution of the orders.

Order execution

The work orders are received at the factory by Production planning & control (PPC). The work orders are incorporated into the rolling manufacturing plan. The work orders are forwarded to the various work centres with the supporting route cards. The route cards control the movement of the goods within the factory from one work centre to another and in monitoring the

manufacturing efficiency and performance. Wastages, reworks and rejections are communicated to PPC for necessary action.

Materials

Necessary material inputs required for processing the orders is estimated by the work centre heads and issued from stores for consumption. Stock statement for all direct materials is prepared on daily basis and necessary procurement action planned based on orders on hand, orders expected and historical data. Where procurement action has been initiated the purchase order copies are forwarded to factory for monitoring the receipt and quality of incoming

materials. Receipt of materials at factory is recorded on Goods Receipt Notes. After acceptance by quality assurance, the materials are taken in stock.

Manufacturing completion

Completion of the manufacturing activities as per the route cards is communicated to PPC by the final manufacturing work centre. The completion of manufacturing is then checked by PPC and then the goods are passed on to the despatch department .

Dispatch

PPC informs the goods ready for despatch to Sales for commercial clearance and delivery instructions. Upon receipt of delivery instructions from Sales the despatch of the goods is arranged. The information and documents are forwarded to customer, sales and / or accounts for information and further action.

Sejal quality standards....

The following is the quality standards that are followed and maintained for Sejal products Sl. No. Parameter SAGL std. For acceptance

Quality A Quality B

1 Cracks Nil Nil Nil Nil

2 Gaseous

& Crush Total length <

240 mm / sq. m

& lines Light Light Light Light

9 Sulphur Stains Nil Nil Nil Nil

10 Corner

breakage &

chip – max.

size

Not more than nominal thickness with 10 mm max. for glass thickness > 6 mm. Max. 6 mm for glass thickness <

6 mm.

For the purpose of these standards Central Area is considered to be the area of the glass lite enclosed by the oval or circle centred on the lite whose axes or diameters equal 50% of length and width of the glass. The rest of the glass area outside this circle or oval is the Outer area of