communicates with a device, and can remotely control and configure it. The connection
manager can also locate an appropriate peer for the device to connect to, and then initiate
the connection.
Note: To enable a property in the MC, click the Set in Profile checkbox and configure the
fields as indicated. After you update the properties on this page, click Save to save your
changes.
Figure 4-20: MC Session Connection Type – Connection Management Interface
Table 4-28: MC Session Configuration Parameters
Parameter Description
CMS Address Enter the IP address or fully qualified domain name (FQDN) of the connection manager.
Note: Many connection managers will automatically set this value in each device they discover.
Accept Any Peer When enabled and set to True, the peer MAC address is deleted and the host is configured to accept any zero client.
Enable Peer Loss Overlay
When enabled, the “Network Connection Lost” overlay appears on the display(s) when a loss of network connectivity is detected. Normal hypervisor scheduling delays can falsely trigger this message.
Note: This option is only available for a zero client. Desktop applications that require the peer loss notification should re-enable the feature through the OSD, AWI, or MC.
Enable Preparing Desktop Overlay
When enabled, the "Preparing Desktop" overlay appears on the display(s) when users log in.
Note: This overlay provides assurance that login is proceeding if the desktop takes more than a few seconds to appear.
Enable Event Log Notification
When enabled, the client sends the contents of its event log to the connection management server.
Parameter Description
Enable Session Disconnect Hotkey
When enabled, users can press the Ctrl+Alt+F12 hotkey sequence to pop up the "Zero Client Control Panel" overlay, which lets them disconnect the current session on the workstation or power off the workstation.
Note: Before users can use this disconnect hotkey sequence, certain other configuration options must be in place. SeeDisconnecting from a Sessionfor details.
Parameter Description
Disconnect Dialog Dis- play Mode
This field lets you control what type of messages appear when a session is disconnected. There are three categories:
Information: User- or administrator-initiated actions affecting the session:
l You have been disconnected because you logged in from another location or your host was shut down or restarted. l You have been disconnected because an administrator
disconnected you.
l You have been disconnected because you logged in from another location.
l You have been disconnected because you disconnected from your workstation.
Warning: System-initiated, but expected actions affecting the session:
l You have been disconnected because your session timed out. Error: Unexpected system-initiated actions causing session to fail:
l You have been disconnected.
l Unable to connect (0x1001). Please contact your IT administrator. l Unable to connect (0x1002). Please contact your IT administrator. l Session closed remotely.
l Session closed remotely (unknown cause).
l You have been disconnected due to a configuration error (0x100). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x201). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x300). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x301). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x302). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x303). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x305). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x400). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x401). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x402). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x403). Please contact your IT administrator for assistance. l You have been disconnected due to a configuration error
(0x404). Please contact your IT administrator for assistance. Note: For detailed information about the above session disconnect codes, please see Knowledge Base Knowledge Base topic 15134- 872 on theTeradici support site.
Parameter Description
You can choose to display:
1. Show All messages – This option shows all disconnect messages including Info, Warning, and Error messages. 2. Show Error and Warnings Only – This option hides info
messages and displays only error and warning messages. 3. Show Error Only – This option hides Info and Warning messages
and displays only Error messages.
4. Show None – Don’t show any disconnect messages.
Session Lost Timeout Enter the timeout (in seconds) for the connection of the active session. The valid timeout range for this field is 5 to 60 seconds. The session will be disconnected when this timeout period expires.
Enable DSCP When enabled, the device populates the Differentiated Services Code Point (DSCP) field in the IP header, allowing intermediate network nodes to prioritize PCoIP traffic accordingly.
Enable Transport Congestion Notification
When enabled, transport congestion notification is enabled to allow PCoIP endpoints to react accordingly if an intermediate network node sets the congestion notification bit in either the IP header or PCoIP transport header.
Note: For more information about the PCoIP transport header, see PCoIP Packet Format.