• No se han encontrado resultados

II. ANÁLISIS DE LOS DATOS

2.6. Prueba de Estacionariedad

get tone-on-hold.

Reference

(1) 7970 Background image format requirements

Each background image requires two PNG files:

• Full size image—Version that appears on the phone.

• Thumbnail image—Version that appears on the Background Images screen from which users can select an image. Must be 25% of the size of the full size image.

The PNG files for background images must meet the following requirements for proper display on the Cisco IP Phone:

• Full size image—320 pixels (width) X 212 pixels (height).

• Thumbnail image—80 pixels (width) X 53 pixels (height).

• Color palette—Includes up to 12-bit color (4096 colors). You can use more than 12-bit color, but the phone will reduce the color palette to12-bit before displaying the image. For best results, reduce the color palette of an image to 12-bit when you create a PNG file.

You’ll need to copy both Full size and Thumbnail images on to router’s flash.

(2) Ring tone PCM file format requirements

The PCM files for the rings must meet the following requirements for proper playback on Cisco IP Phones:

• Raw PCM (no header)

• 8000 samples per second

• 8 bits per sample

• uLaw compression

• Maximum ring size — 16080 samples

• Minimum ring size — 240 samples

• Number of samples in the ring must be evenly divisible by 240

• Ring should start and end at the zero crossing

You can use any standard audio editing packages that support these file format requirements to create PCM files for custom phone rings.

Sample Configuration

version 12.4

service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption

!

hostname pod21

!

boot-start-marker boot-end-marker

!

enable password cisco

!

no aaa new-model

!

resource policy

!

!

! ip cef

no ip dhcp use vrf connected

ip dhcp excluded-address 10.10.21.1 10.10.21.100 ip dhcp excluded-address 10.10.121.1 10.10.121.100

!

ip dhcp pool lan

network 10.10.21.0 255.255.255.0 default-router 10.10.21.1

option 150 ip 10.10.100.21

!

ip dhcp pool ccm

network 10.10.121.0 255.255.255.0 default-router 10.10.121.1

option 150 ip 10.10.100.201

!

!

no ip domain lookup ip domain name cisco.com

!

!

voice-card 0 no dspfarm

!

!

!

!

voice translation-rule 1 rule 1 /^9/ //

!

voice translation-rule 2 rule 1 /^1/ /408001/

!

voice translation-rule 3 rule 1 /^408001/ /1/

!

!

voice translation-profile call-cue translate calling 3

translate called 3

translate redirect-called 3

!

voice translation-profile call-out translate calling 2

translate called 1

!

!

!

application

service acd flash:app-b-acd-2.1.0.0.tcl param aa-hunt1 12131

param number-of-hunt-grps 2 param queue-manager-debugs 1 param aa-hunt2 12111

param queue-len 30 !

service main-aa flash:app-b-acd-aa-2.1.0.0.tcl paramspace english index 1

param service-name acd

paramspace english language en param second-greeting-time 30 param max-time-vm-retry 2 param max-time-call-retry 60 param voice-mail 12199 param aa-pilot 12130

paramspace english location flash:

param number-of-hunt-grps 2 param handoff-string main-aa param dial-by-extension-option 3 param call-retry-timer 10

!

!

interface GigabitEthernet0/0

ip address 10.10.100.21 255.255.255.0 duplex auto

speed auto

!

interface Service-Engine0/0

ip unnumbered GigabitEthernet0/0

service-module ip address 10.10.100.121 255.255.255.0 service-module ip default-gateway 10.10.100.21

!

interface GigabitEthernet0/1 no ip address

shutdown duplex auto speed auto

!

interface Service-Engine1/0 no ip address

shutdown

!

router eigrp 22 network 10.0.0.0 auto-summary

!

ip route 10.10.100.121 255.255.255.255 Service-Engine0/0

!

ip http server

!

!

!

tftp-server flash:P0030702T023.bin tftp-server flash:P0030702T023.loads tftp-server flash:P0030702T023.sb2 tftp-server flash:P0030702T023.sbn tftp-server flash:P00405000700.bin tftp-server flash:P00405000700.sbn tftp-server flash:CVM70.2-0-2-26.sbn tftp-server flash:Jar70.2-9-2-26.sbn tftp-server flash:TERM70.7-0-3-0S.loads tftp-server flash:cnu70.2-7-6-26.sbn tftp-server flash:term70.default.loads

!

control-plane

!

!

!

voice-port 0/0/0

!

voice-port 0/0/1

!

voice-port 0/1/0

!

voice-port 0/1/1

!

voice-port 0/1/2

!

voice-port 0/1/3

!

!

!

!

!

dial-peer voice 1 voip description ** to CUE **

destination-pattern 1219.

session protocol sipv2

session target ipv4:10.10.100.121 dtmf-relay sip-notify

codec g711ulaw no vad

!

dial-peer voice 2 voip

description ** E164 to CUE **

translation-profile outgoing call-cue destination-pattern 408001219.

session protocol sipv2

session target ipv4:10.10.100.121 incoming called-number 408001219.

dtmf-relay sip-notify codec g711ulaw no vad

!

dial-peer voice 10 voip

translation-profile outgoing call-out destination-pattern 9408001....

session target ras

incoming called-number 408001....

dtmf-relay h245-alphanumeric codec g711ulaw

no vad

!

dial-peer voice 200 pots destination-pattern 12122 port 0/0/1

!

dial-peer voice 33 voip destination-pattern B21

!

dial-peer voice 210 pots destination-pattern 821 port 0/1/0

!

!

!

gatekeeper

shutdown

!

!

telephony-service no auto-reg-ephone load 7910 P00405000700 load 7961-7940 P0030702T023 load 7971 TERM70.7-0-3-0S load 7970 TERM70.7-0-3-0S max-ephones 10

max-dn 50

ip source-address 10.10.100.21 port 2000 system message pod21

time-zone 5

dialplan-pattern 1 408001.... extension-length 5 voicemail 12199

max-conferences 8 gain -6 call-forward pattern .T hunt-group logout HLog

moh en_bacd_music_on_hold.au multicast moh 239.1.21.1 port 2000

web admin system name admin password cisco transfer-system full-consult

transfer-pattern .T night-service code *1234

create cnf-files version-stamp 7961 Apr 24 2006 07:16:43

!

!

ephone-template 1

softkeys idle Redial HLog Cfwdall Dnd Pickup

softkeys connected Park HLog Trnsfer Confrn Endcall

!

!

ephone-dn 1 dual-line

number 12101 no-reg primary call-forward busy 12199

call-forward noan 12199 timeout 8 no forward local-calls

!

!

ephone-dn 2 dual-line

number 12102 no-reg primary call-forward busy 12199

call-forward noan 12199 timeout 8

!

ephone-dn 11 dual-line number 12111

label Trunk12111

name FXO trunk1 night-service bell

trunk 12122 monitor-port 0/0/0

!

!

ephone-dn 12 dual-line number 12112

label Trunk12112 name FXO trunk2

trunk 12122 monitor-port 0/0/0

!

!

ephone-dn 31 number 72101

park-slot timeout 10 limit 3 recall label Park72101

!

!

ephone-dn 33

number A21 no-reg primary moh out-call B21

!

!

ephone-dn 40

number 8000... no-reg primary mwi on

!

!

ephone-dn 41

number 8001... no-reg primary mwi off

!

!

ephone 1

description 7970 on pod21 ephone-template 1

username "userone" password none mac-address 0013.1A10.6FF1 type 7970

auto-line 2 answer-incoming button 1:1 2s11 3:12 4m31 night-service bell

!

!

!

ephone 2

description 7961 on pod21 ephone-template 1

username "usertwo" password none mac-address 000E.38FB.F1C5 type 7961

button 1:2 2:11

!

!

!

ephone 5

description Teleworker

mac-address 0005.9A3C.7800 codec g729r8

mtp

button 1:5

!

!

ephone-hunt 1 longest-idle pilot 12131

list 12101, 12102 timeout 5, 5 auto logout 1

display-logout HASTA LA PASTA present-call onhook-phone

!

!

!

line con 0

exec-timeout 0 0 logging synchronous line aux 0

line 66

no activation-character no exec

transport preferred none transport input all

transport output pad telnet rlogin lapb-ta mop udptn v120 line 194

no activation-character no exec

transport preferred none transport input all

transport output pad telnet rlogin lapb-ta mop udptn v120 line vty 0 4

exec-timeout 0 0 password cisco logging synchronous login

!

scheduler allocate 20000 1000 ntp clock-period 17179869 ntp master

ntp server 10.10.100.202

! end pod21#

CUE Integrated Messaging

CME4.0/CUE2.3

First Look

Documento similar