Artículos:
1. M. A. Reinoso, C. Otálora and G. Gordillo, «Improvement of the properties of CH3NH3PbI3 thin films prepared by sequential evaporation using an
advanced control system» aprobado para su publicación en la revista
Materials.
2. M. A. Reinoso, H. Gómez and G. Gordillo, «Evaluation of optical, morphological and structural properties of MAPI thin films deposited by co- evaporation», IEEE Conferences: 7th World Conference on Photovoltaic
Energy Conversion (WCPEC-7), pp. 2237-2240, 2018.
3. G. Gordillo, C. A. Otálora and M. A. Reinoso, «Study of trapping and recombination processes in thin films of MAPbI3, MAPbI2Br and MAPbI2Cl
through photoconductivity measurements» Journal of Materials Science:
Materials in Electronics, vol. 29, pp. 4276-4284, 2018.
4. G. Gordillo, C. A. Otálora and M. A. Reinoso, «Trap center study in hybrid organic-inorganic perovskite using thermally stimulated current (TSC) analysis» Journal of Applied Physics, vol. 122, nº 7, 2017.
Ponencias
1. M. A. Reinoso, R. Camacho, H. Gómez and G. Gordillo, «Study of optical, morphological and structural properties of CH3NH3PbI3 thin films prepared
by sequential evaporation» Fourth International Meeting of Researchers in
Materials and Technology Plasma (4th IMRMPT), Santa Marta, Colombia,
2017.
2. M. A. Reinoso, H. Gómez and G. Gordillo, «Study of properties of thin films of CH3NH3PbI3 prepared by co-evaporation», IV International Congress Next
Generation Solar Energy (NGSE2017), Cali, Colombia, 2017.
3. G. Gordillo, C. A. Otálora and M. A. Reinoso, «Photoconductivity in thin films of MAPbI3 perovskites», International Conference on Hybrid and Organic
Bibliografía
[1] International Energy Agency (IEA), Market Report Series: Renewables 2017, Analysis and Forecasts to 2022, IEA publications, 2017.
[2] Foro Mundial para la Naturaleza (WWF), Informe de la energía renovable, México D. F., 2011.
[3] H. J. Snaith, «Perovskites: The emergence of a new era for low-cost, high-efficiency solar cells,» Journal of Physical Chemistry Letters, vol. 4, pp. 3623-3630, 2013. [4] G. Timilsina, L. Kurdgelashvili y P. Narbel, «A review of solar energy: markets,
economics and policies,» The World Bank, Development Research Group, Environment and Energy Team, 2011.
[5] Renewable Energy Policy Networks for the 21st Century (REN21), «Renewables 2018: Global status report,» REN21 Secretariat, Paris, 2018.
[6] M. A. Green, Y. Hishikawa, E. D. Dunlop, D. H. Levi, J. Hohl‐Ebinger y A. W. Y. Ho‐Baillie, «Solar cell efficiency tables (version 51),» Progress in Photovoltaics
Research and Applications, vol. 26, p. 3–12, 2018.
[7] National Renewable Energy Laboratory (NREL), «Best Research-Cell Efficiencies,» 25 04 2018. [En línea]. Available: http://www.nrel.gov/pv/assets/images/efficiency- chart.png. [Último acceso: 12 05 2018].
[8] T. Ibn-Mohammed, S. C. L. Koh, I. M. Reaney, A. Acquaye, G. Schileo, K. B. Mustapha y R. Greenough, «Perovskite solar cells: An integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies,»
Renewable and Sustainable Energy Reviews, vol. 80, pp. 1321-1344, 2017.
[9] J. Jean, P. R. Brown, R. L. Jaffe, T. Buonassisi y V. Bulović, «Pathways for solar photovoltaics,» Energy & Environmental Science, vol. 8, nº 4, pp. 1200-1219, 2015. [10] G. Niu, X. Guo y L. Wang, «Review of recent progress in chemical stability of
perovskite solar cells. , ().,» Journal of Materials Chemistry A, vol. 3, pp. 8970-8980, 2015.
[11] S. Kazim, M. K. Nazeeruddin, M. Grätzel y S. Ahmad, «Perovskite as light harvester: a game changer in photovoltaics,» Angewandte Chemie (International Ed in English), vol. 53, pp. 2812-2824, 2014.
[12] T. Wolfram y S. Ellialtioglu, Electronic and optical properties of D-band perovskites, New York: Cambridge University Press, 2006.
[13] S. Yang, W. Fu, Z. Zhang, H. Chena y C.-Z. Li, «Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite,» Journal of Materials Chemistry
[14] G. E. Eperon, S. D. Stranks, C. Menelaou, M. B. Johnston, L. M. Herz y H. J. Snaith, «Formamidinium lead trihalide: A broadly tunable perovskite for efficient planar heterojunction solar cells,» Energy & Environmental Science, vol. 7, pp. 982-988, 2014.
[15] W. Vallejo, Desarrollo de materiales fotovoltaicos usados como ventana óptica en celdas solares, Bogotá: Universidad Nacional de Colombia, 2011.
[16] K. Kalyanasundaram, S. Zakeeruddin y M. Grätzel, «Recent advances in hybrid halide perovskites-based solar cells,» Material Matters, vol. 11, nº 1, pp. 3-10, 2016. [17] M. Hurtado, «Estado actual de las celdas solares basadas en capas absorbentes de bajo
costo Cu2ZnSnS4, perspectivas y nuevos aportes realizados,» Revista Elementos, vol. 2, nº 1, pp. 117-131, 2012.
[18] U. S. Department of Energy, Energy Efficiency and Renewable Energy, «The history of solar,» [En línea]. Available: www.eere.energy.gov/solar/pdfs/solar_timeline.pdf. [Último acceso: 15 05 2018].
[19] L. M. Fraas, «History of solar cell development,» de Low-cost solar electric power, Switzerland, Springer International Publishing, 2014, pp. 1-12.
[20] C. E. Fritts, «On a new form of selenium cell, and some electrical discoveries made by its use,» American Journal of Science, vol. 26, nº 156, pp. 465-472, 1883.
[21] G. Conibeer, «Third-generation photovoltaics,» Materials Today, vol. 10, nº 11, pp. 42-50, 2007.
[22] Fraunhofer Institute for Solar Energy Systems, ISE, «Photovoltaics Report,» Freiburg, 2017.
[23] U. S. Geological Survey (USGS), «Tellurium-The bright future of solar energy,» [En línea]. Available: https://pubs.usgs.gov/fs/2014/pdf/fs2014-3077.pdf. [Último acceso: 12 05 2018].
[24] V. Fthenakis y K. Zweibel, «CdTe PV: Real and Perceived EHS Risks,» de National
Center for Photovoltaics Review Meeting, Denver, 2003.
[25] F. Kessler y D. Rudmann, «Technological aspects of flexible CIGS solar cells and modules,» Solar Energy, vol. 77, p. 685–695, 2004.
[26] Centre for Solar Energy and Hidrogen Research Baden-Wurttemberg (ZSW), «ZWS sets new world record for thin-film solar cells, CIGS PV's efficiency ratings rising fast,» 15 06 2016. [En línea]. Available: www.zsw‐ bw.de/fileadmin/user_upload/PDFs/Pressemitteilungen/2016/pr09‐2016‐ZSW‐
WorldRecordCIGS.pdf. [Último acceso: 12 05 2018].
[27] W. S. Yang, B.-W. Park, E. H. Jung, N. J. Jeon, Y. C. Kim, D. U. Lee, S. S. Shin, J. Seo, E. K. Kim, J. H. Noh y S. I. Seok, «Iodide management in formamidinium-lead- halide–based perovskite layers for efficient solar cells,» Science, vol. 356, pp. 1376- 1379, 2017.
[28] N. K. Elumalai, A. Mahmud, D. Wang y A. Uddin, «Perovskite Solar Cells: Progress and Advancements,» Energies, vol. 9, nº 861, pp. 1-20, 2016.
[29] L. Yang, A. T. Barrows, D. G. Lidzey y T. Wang, «Recent progress and challenges of organometal halide perovskite solar cells.,» Reports on Progress in Physics, vol. 79, pp. 026501:1-26, 2016.
[30] C. K. Møller, «Crystal structure and photoconductivity of caesium plumbohalides,»
Nature, vol. 182, p. 1436, 1958.
[31] D. Weber, «CH3NH3SnBrxJ1-x (x=0-3), a Sn(II)-system with cubic perovskite structure,» Naturforsch, vol. 33b, pp. 862-865, 1978.
[32] D. B. Mitzi, C. A. Feild, W. T. A. Harrison y A. M. Guloy, «Conducting tin halides with a layered organic-based perovskite structure,» Nature, vol. 369, p. 467–469, 1994.
[33] D. B. Mitzi, S. Wang, C. A. Feild, C. A. Chess y A. M. Guloy, «Conducting Layered Organic-inorganic Halides Containing <110>-Oriented Perovskite Sheets,» Science, vol. 267, pp. 1473-1476, 1995.
[34] C. R. Kagan, D. B. Mitzi y C. D. Dimitrakopoulos, «Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors,» Science, vol. 286, pp. 945-947, 1999.
[35] D. B. Mitzi, C. D. Dimitrakopoulos y L. L. Kosbar, «Structurally tailored organic- inorganic perovskites: Optical properties and solution-processed channel materials for thin-film transistors,» Chemistry of Materials, vol. 13, p. 3728–3740, 2001.
[36] D. B. Mitzi, M. T. Prikas y K. Chondroudis, «Thin film deposition of organic- inorganic hybrid materials using a single source thermal ablation technique,»
Chemistry of Materials, vol. 11, p. 542–544, 1999.
[37] K. Chondroudis y D. B. Mitzi, «Electroluminescence from an organic-inorganic perovskite incorporating a quaterthiophene dye within lead halide perovskite layers,»
Chemistry of Materials, vol. 11, p. 3028–3030, 1999.
[38] D. B. Mitzi, «Synthesis, structure, and properties of organic‐inorganic perovskites and related materials,» de Progress in Inorganic Chemistry, John Wiley & Sons, Inc, 1999, p. 616.
[39] A. Kojima, K. Teshima, Y. Shirai y T. Miyasaka, «Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,» Journal of the American Chemical
Society, vol. 131, pp. 6050-6051, 2009.
[40] J. H. Im, C. R. Lee, J. W. Lee, S. W. Park y N. G. Park, «6.5% efficient perovskite quantum-dot-sensitized solar cell,» Nanoscale, vol. 3, pp. 4088-4093, 2011.
[41] H.-S. Kim, C.-R. Lee, J.-H. Im, K.-B. Lee, T. Moehl, A. Marchioro, S.-J. Moon, R. Humphry-Baker, J.-H. Yum, J. E. Moser, M. Grätzel y N.-G. Park, «Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%,» Scientific Reports, vol. 2, nº 591, pp. 1-7, 2012.
[42] M. M. Lee, J. Teuscher, T. Miyasaka, T. N. Murakami y H. J. Snaith, «Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites,» Science, vol. 338, pp. 643-647, 2012.
[43] J. Burschka, N. Pellet, S.-J. Moon, R. Humphry-Baker, P. Gao, M. K. Nazeeruddin y M. Grätzel, «Sequential deposition as a route to high-performance perovskite- sensitized solar cells,» Nature, vol. 499, pp. 316-319, 2013.
[44] M. Liu, M. B. Johnston y H. J. Snaith, «Efficient planar heterojunction perovskite solar cells by vapour deposition,» Nature, vol. 501, pp. 395-398, 2013.
[45] N. J. Jeon, J. H. Noh, Y. C. Kim, W. S. Yang, S. Ryu y S. I. Seok, «Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells,»
Nature materials, vol. 13, pp. 897-903, 2014.
[46] N. J. Jeon, J. H. Noh, W. S. Yang, Y. C. Kim, S. Ryu, J. Seo y S. I. Seok, «Compositional engineering of perovskite materials for high-performance solar cells,» Nature letters, vol. 517, pp. 476-480, 2014.
[47] N.-G. Park, «Perovskite solar cells: an emerging photovoltaic technology,» Materials
Today, vol. 18, pp. 65-72, 2015.
[48] H. Zhou, Q. Chen, G. Li, S. Luo, T.-b. Song, H.-S. Duan, Z. Hong, J. You, Y. Liu y Y. Yang, «Interface engineering of highly efficient perovskite solar cells,» Science, vol. 345, pp. 542-546, 2014.
[49] W. S. Yang, J. H. Noh, N. J. Jeon, Y. C. Kim, S. Ryu, J. Seo y S. I. Seok, «High- performance photovoltaic perovskite layers fabricated through intramolecular exchange,» Science, vol. 348, pp. 1234-1237, 2015.
[50] W. S. Yang, B.-W. Park, E. H. Jung, N. J. Jeon, Y. C. Kim, D. U. Lee, S. S. Shin, J. Seo, E. K. Kim, J. H. Noh y S. I. Seok, «Supplementary Materials for Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells,» Science, vol. 356, pp. 1-19, 2017.
[51] G. Rose, «De perowskite, fossili novo,» De novis quibusdam fossilibus quae in
Montibus Uraliis inveniuntur, pp. 3-5, 1839.
[52] A. R. Chakhmouradian y P. M. Woodward, «Celebrating 175 years of perovskite research: a tribute to Roger H. Mitchell,» Physics and Chemistry of Minerals, vol. 41, pp. 387-391, 2014.
[53] H.-S. Kim, S. H. Im y N.-G. Park, «Organolead halide perovskite: New horizons in solar cell research,» The Journal of Physical Chemistry, vol. 118, p. 5615−5625, 2014.
[54] C. Eames, J. M. Frost, P. R. F. Barnes, B. C. O’Regan, A. Walsh y M. S. Islam, «Ionic transport in hybrid lead iodide perovskite solar cells,» Nature
Communications, vol. 6, pp. 7497: 1-8, 2015.
[55] Q. Xu, D. Yang, J. Lv, Y.-Y. Sun y L. Zhang, «Perovskite solar absorbers: Materials by design,» Small Methods, vol. 2, pp. 1700316: 1-19, 2018.
[56] Z. Yang y W. Zhang, «Organolead halide perovskite: A rising player in high‐ efficiency solar cells,» Chinese Journal of Catalysis, vol. 35, p. 983–988, 2014. [57] Z. Fan, K. Sun y J. Wang, «Perovskites for photovoltaics: a combined review of
organic–inorganic halide perovskites and ferroelectric oxide perovskites,» Journal of
Materials Chemistry A, vol. 3, p. 18809–18828, 2015.
[58] J. H. Noh, S. H. Im, J. H. Heo, T. N. Mandal y S. I. Seok, «Chemical management for colorful, efficient, and stable inorganic−organic hybrid nanostructured solar cells,»
Nano Letters, vol. 13, pp. 1764-1769, 2013.
[59] J. Qiu, Y. Qiu, K. Yan, M. Zhong, C. Mu, H. Yan y S. Yang, «All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one- dimensional TiO2 nanowire arrays,» Nanoscale, vol. 5, pp. 3245-3248, 2013.
[60] Y. Yamada, T. Nakamura, M. Endo, A. Wakamiya y Y. Kanemitsu, «Near-band-edge optical responses of solution-processed organic–inorganic hybrid perovskite CH3NH3PbI3 on mesoporous TiO2 electrodes,» Applied Physics Express, vol. 7, nº 3, p. 032302, 2014.
[61] C. C. Stoumpos, C. D. Malliakas y M. G. Kanatzidis, «Semiconducting tin and lead iodide perovskites with organic cations: Phase transitions, high mobilities, and near- infrared photoluminescent properties,» Inorganic Chemistry, vol. 52, p. 9019−9038, 2013.
[62] T. Baikie, Y. Fang, J. M. Kadro, M. Schreyer, F. Wei, S. G. Mhaisalkar, M. Graetzel y T. J. White, «Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications,» Journal of
Materials Chemistry A, vol. 1, pp. 5628-5641, 2013.
[63] A. Binek, F. C. Hanusch, P. Docampo y T. Bein, «Stabilization of the trigonal high- temperature phase of formamidinium lead iodide,» The Journal of Physical Chemistry
Letters, vol. 6, p. 1249−1253, 2015.
[64] J. Borchert, R. L. Milot, J. B. Patel, C. L. Davies, A. D. Wright, L. Martínez, H. J. Snaith, L. M. Herz y M. B. Johnston, «Large-area, highly uniform evaporated formamidinium lead triiodide thin films for solar cells,» ACS Energy Letters, vol. 2, p. 2799−2804, 2017.
[65] J. H. Heo y S. H. Im, «CH3NH3PbBr3–CH3NH3PbI3 Perovskite–perovskite tandem solar cells with exceeding 2.2 V open circuit voltage,» Advanced Materials, vol. 28, pp. 5121-5125, 2016.
[66] M. Kato, T. Fujiseki, T. Miyadera, T. Sugita, S. Fujimoto, M. Tamakoshi, M. Chikamatsu y H. Fujiwara, «Universal rules for visible-light absorption in hybrid perovskite materials,» Journal of Applied Physics, vol. 121, p. 115501, 2017.
[67] A. Poglitsch y D. Weber, «Dynamic disorder in methylammonium trihalogenoplumbates (II) observed by millimeter-wave spectroscopy,» The Journal
of Chemical Physics, vol. 87, pp. 6373-6378, 1987.
[68] Z. Cheng y J. Lin, «Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering,» CrystEngComm, vol. 12, pp. 2646-2662, 2010.
[69] J. Even, L. Pedesseau, J.-M. Jancu y C. Katan, «Importance of spin−orbit coupling in hybrid organic/inorganic perovskites for photovoltaic applications,» The Journal of
Physical Chemistry Letters, vol. 4, pp. 2999-3005, 2013.
[70] T. J. Jacobsson, J.-P. Correa-Baena, M. Pazoki, M. Saliba, K. Schenk, M. Graetzel y A. Hagfeldt, «Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells,» Energy & Environmental Science, vol. 9, pp. 1706-1724, 2016.
[71] G. E. Eperon, G. M. Paternò, R. J. Sutton, A. Zampetti, A. A. Haghighirad, F. Cacialli y H. J. Snaith, «Inorganic caesium lead iodide perovskite solar cells,» Journal of
[72] M. Saliba, S. Orlandi, T. Matsui, S. Aghazada, M. Cavazzini, J.-P. Correa-Baena, P. Gao, R. Scopelliti, E. Mosconi, K.-H. Dahmen, F. de Angelis, A. Abate, A. Hagfeldt, G. Pozzi, M. Graetzel y M. K. Nazeeruddin, «A molecularly engineered hole- transporting material for efficient perovskite solar cells,» Nature Energy, vol. 1, pp. 15017-15023, 2016.
[73] S. D. Stranks, P. K. Nayak, W. Zhang, T. Stergiopoulos y H. J. Snaith, «Formation of thin films of organic–inorganic perovskites for high-efficiency solar cells,»
Angewandte Chemie (International Ed in English), vol. 54, pp. 405-418, 2015.
[74] Q. Wang, H. Chen, G. Liu y L. Wang, «Control of inorganic-organic halide perovskites in solid-state solar cells: a perspective,» Science Bulletin, vol. 60, pp. 405-418, 2015.
[75] S. Wang, L. K. Ono, M. R. Leyden, Y. Kato, S. R. Raga, M. V. Lee y Y. Qi, «Smooth perovskite thin films and efficient perovskite solar cells prepared by the hybrid deposition method,» Journal of Materials Chemistry A, vol. 3, pp. 14631-14641, 2015.
[76] J. Teuscher, A. Ulianov, O. Muntener, M. Graetzel y N. Tétreault, «Control and Study of the Stoichiometry in Evaporated Perovskite Solar Cells,» ChemSusChem, vol. 8, pp. 3847-3852, 2015.
[77] D. Mitzi, «Thin-Film Deposition of Organic-Inorganic Hybrid Materials,» Chemistry
of Materials, vol. 13, pp. 3283-3298, 2001.
[78] Y. Zhao y K. Zhu, «Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications,» Chemical Society Reviews, vol. 45, pp. 655-689, 2016.
[79] D. Liu y T. L. Kelly, «Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques,» Nature Photonics, vol. 8, pp. 133-138, 2013.
[80] E. H. Anaraki, A. Kermanpur, L. Steier, K. Domanski, T. Matsui, W. Tress, M. Saliba, A. Abate, M. Grätzel, A. Hagfeldt y J.-P. Correa-Baena, «Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide,» Energy and
Environmental Science, vol. 9, pp. 3128-3134 , 2016.
[81] E. Edri, S. Kirmayer, S. Mukhopadhyay, K. Gartsman, G. Hodes y D. Cahen, «Elucidating the charge carrier separation and working mechanism of CH3NH3PbI3- xClx perovskite solar cells,» Nature Communications, vol. 5, pp. 3461: 1-8, 2014. [82] V. W. Bergmann, S. A. L. Weber, F. Javier Ramos, M. K. Nazeeruddin, M. Grätzel,
D. Li, A. L. Domanski, I. Lieberwirth, S. Ahmad y R. Berger, «Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell,» Nature Communications, vol. 5, nº 5001, 2014.
[83] F. Lan, M. Jiang, Q. Tao y G. Li, «Revealing the working mechanisms of planar perovskite solar cells with cross-sectional surface potential profiling,» IEEE Journal
of Photovoltaics, vol. 8, pp. 125-131, 2018.
[84] M. Green, A. Ho-Baillie y H. Snaith, «The emergence of perovskite solar cells,»
[85] J. Estrada Rugeles, «Síntesis y caracterización de películas delgadas ZnO y WO3 para ser usadas como ETL en celdas solares tipo perovskita,» Universidad Nacional de Colombia, Bogotá, 2017.
[86] S. Ravishankar, S. Gharibzadeh, C. Roldán-Carmona, G. Grancini, Y. Lee, M. Ralaiarisoa, A. M. Asiri, N. Koch, J. Bisquert y M. K. Nazeeruddin, «Influence of charge transport layers on open-circuit voltage and hysteresis in perovskite solar cells,» Joule , vol. 2, pp. 1-11, 2018.
[87] J.-P. Correa-Baena, M. Saliba, T. Buonassisi, M. Grätzel, A. Abate, W. Tress y A. Hagfeldt, «Promises and challenges of perovskite solar cells,» Science, vol. 358, nº 6364, pp. 739-744, 2017.
[88] R. Lindblad, D. Bi, B.-w. Park, J. Oscarsson, M. Gorgoi, H. Siegbahn, M. Odelius, E. M. J. Johansson y H. Rensmo, «Electronic structure of TiO2/CH3NH3PbI3 perovskite solar cell interfaces,» Journal of Physical Chemistry Letters, vol. 5, pp. 648-653, 2014.
[89] P. Schulz, E. Edri, S. Kirmayer, G. Hodes, D. Cahen y A. Kahn, «Interface energetics in organo-metal halide perovskite-based photovoltaic cells,» Energy Environmental
Science, vol. 7, pp. 1377-1381, 2014.
[90] M. Hu, C. Bi, Y. Yuan, Z. Xiao, Q. Dong, Y. Shao y J. Huang, «Distinct exciton dissociation behavior of organolead trihalide perovskite and excitonic semiconductors studied in the same system,» Small, vol. 11, nº 18, pp. 2164-2169, 2015.
[91] C. Motta y F. S. S. El-Mellouhi, «Charge carrier mobility in hybrid halide perovskites,» Scientific Reports, vol. 5, nº 12746, 2015.
[92] P. P. Boix, K. Nonomura, N. Mathews y S. G. Mhaisalkar, «Current progress and future perspectives for organic/inorganic perovskite solar cells,» Materials Today, vol. 17, nº 1, pp. 16-23, 2014.
[93] M. Faraldos y C. Goberna, Técnicas de análisis y caracterización de materiales, Segunda ed., Madrid: CSIC, 2011.
[94] G. Will, Powder Diffraction: The Rietveld Method and the Two Stage Method to Determine and Refine Crystal Structures from Powder Diffraction Data, Swisttal- Buschhoven: Springer, 2006.
[95] J. M. Albella, «La microscopía para el estudio de materiales y láminas delgadas,» de
Láminas Delgadas y Recubrimientos, Consejo Superior de Investigaciones
Científicas, 2003, pp. 500-505.
[96] H. Castro, Estudio de las propiedades ópticas y estructurales en películas delgadas de ZnSe, Bogotá: Universidad Nacional de Colombia, 2013.
[97] M. Ipohorski y P. Bozzano, «Microscopía electrónica de barrido en la caracterización de materiales,» Ciencia e Investigación, vol. 63, nº 3, pp. 43-53, 2013.
[98] R. Saravanan y M. Phil, Non-Linear Optical Materials, vol. 28, Millersville: Materials Research Forum LLC, 2018, p. 196.
[99] M. Shirayama, H. Kadowaki, T. Miyadera, T. Sugita, M. Tamakoshi, M. Kato, T. Fujiseki, D. Murata, S. Hara, T. Murakami, S. Fujimoto, M. Chikamatsu y H. Fujiwara, «Optical transitions in hybrid perovskite solar cells: Ellipsometry, density functional theory, and quantum efficiency analyses for CH3NH3PbI3,» Physical
Review Applied, vol. 5, p. 014012, 2016.
[100] J. I. Pankove, Optical processes in Semiconductors, New York: Dover Publications, Inc., 1971.
[101] Y. Zhao y K. Zhu, «Charge transport and recombination in perovskite (CH3NH3)PbI3 sensitized TiO2 solar cells,» Journal of Physical Chemistry Letters, vol. 4, pp. 2880-2884, 2013.
[102] A. Serfaty y N. V. Joshi, «Fourier-transform analysis of multiexponential curves observed in photoconductivity studies,» Physical Review B, vol. 41, nº 12, pp. 8545- 8548, 1990.
[103] J. McKelvey, Solid State Semiconductors Physics, New York: Harper and Row, 1966.
[104] G. Gordillo, C. A. Otálora y M. A. Reinoso, «Study of trapping and recombination processes in thin films of MAPbI3, MAPbI2Br and MAPbI2Cl through photoconductivity measurements,» Journal of Materials Science: Materials in
Electronics, vol. 29, pp. 4276-4284, 2018.
[105] M. Courel, O. Vigil-Galán, D. Jiménez-Olarte, M. Espíndola-Rodríguez y E. Saucedo, «Trap and recombination centers study in sprayed Cu2ZnSnS4 thin films,»
Journal of Applied Physics, vol. 116, nº 134503, 2014.
[106] G. Gordillo, C. A. Otálora y M. A. Reinoso, «Trap center study in hybrid organic- inorganic perovskite using thermally stimulated current (TSC) analysis,» Journal of
Applied Physics, vol. 122, nº 7, 2017.
[107] C. Furetta, G. Kitis y C. H. Kuo, «Kinetics parameters of CVD diamond by computerised glow-curve deconvolution (CGCD),» Nuclear Instruments and Methods
in Physics Research B, vol. 160, pp. 65-72, 2000.
[108] N. M. Gasanly y T. Yildirim, «Thermally stimulated current study of shallow traps in as-grown TlInSe2 chain crystals,» Acta Physica Polonica A, vol. 119, nº 3, pp. 437- 441, 2011.
[109] C. Alexander y M. Sadiku, Fundamentos de circuitos eléctricos, México, D. F.: McGraw-Hill Interamericana, 2006.
[110] J. Bisquert y F. Fabregat-Santiago, «Impedance Spectroscopy: A general introduction and Application to dye-sensitized solar cells,» de Dye-sensitized solar cells, Lausanne, EPFL Press, 2010, pp. 457-554.
[111] A. F. Loaiza, Preparación de materiales fotovoltaicos orgánicos y estudio de propiedades de transporte eléctrico usando espectroscopia de impedancia, Bogotá: Universidad Nacional de Colombia, 2014.
[112] C. Otálora, A. Loaiza y G. Gordillo, «Study of electrical transport properties of thin films used as HTL and as active layer in organic solar cells,» Advances in Materials
[113] J. L. Gray, «The physics of the solar cell,» de Handbook of photovoltaic science and
engineering, John Wiley & Sons, Ltd, 2011, pp. 82-129.
[114] S. Ramos Terrón, «Fabricación y caracterización de celdas fotovoltaicas de perovskita de nueva composición,» Universidad de Sevilla, Sevilla, 2018.
[115] C. Otálora, «Desarrollo de materiales usados en la fabricación de celdas solares orgánicas,» Universidad Nacional de Colombia, Bogotá, 2013.
[116] C. Momblona, O. Malinkiewicz, C. Roldán-Carmona, A. Soriano, L. Gil-Escrig, E. Bandiello, M. Scheepers, E. Edri y H. J. Bolink, «Efficient methylammonium lead iodide perovskite solar cells with active layers from 300 to 900 nm,» APL Materials, vol. 2, nº 081504, 2014.
[117] T. Oku, «Crystal structures of CH3NH3PbI3 and related perovskite compounds used for solar cells,» de Solar cells: New approaches and reviews, InTech, 2015, pp. 77- 101.
[118] Y. Yamada, T. Yamada, L. Q. Phuong, N. Maruyama, H. Nishimura, A. Wakamiya, Y. Murata y Y. Kanemitsu, «Dynamic optical properties of CH₃NH₃PbI₃ single crystals as revealed by one- and two-photon excited photoluminescence measurements,» Journal of the American Chemical Society, vol. 137, nº 33, pp. 10456-9, 2015.
[119] Y. Dang, Y. Liu, Y. Sun, D. Yuan, X. Liu, W. Lu, G. Liu, H. Xia y X. Tao, «Bulk crystal growth of hybrid perovskite material CH3NH3PbI3,» CrystEngComm, vol. 17, pp. 665-670, 2015.
[120] M. Luan, J. Song, X. Wei, F. Chen y J. Liu, «Controllable growth of bulk cubic-phase CH3NH3PbI3 single crystal with exciting room-temperature stability,»
CrystEngComm, vol. 18, pp. 5257-5261, 2016.
[121] Z. Wang, Z. Shi, T. Li, Y. Chen y W. Huang, «Stability of perovskite solar cells: A prospective on the substitution of the A cation and X anion,» Angewandte Chemie
(International Ed in English), vol. 55, pp. 2-25, 2016.
[122] P. Terpstra y H. G. K. Westenbrink, «On the crystal structure of lead iodide,»
Proceedings of the Koninklijke Nederlandse Academie van Wetenschappen, vol. 29,
pp. 431-442, 1926.
[123] M. Safaa, A. Naser, Y. Al-Douri y U. Hashim, «Structural properties of PbI2 thin film,» Advanced Materials Research, vol. 879, pp. 175-179, 2014.
[124] O. Yamamuro, T. Matsuo, H. Suga, W. I. F. David, R. M. Ibberson y A. J. Leadbetter, «Neutron diffraction and calorimetric studies of methylammonium iodide,» Acta
Crysthallographica Section B, vol. 48, pp. 329-336, 1992.
[125] M. T. Weller, O. J. Weber, J. M. Frost y A. Walsh, «Cubic perovskite structure of black formamidinium lead iodide, α-[HC(NH2)2]PbI3, at 298 K,» The Journal of
Physical Chemistry Letters, vol. 6, p. 3209−3212, 2015.
[126] A. A. Petrov, E. A. Goodilin, A. B. Tarasov, V. A. Lazarenko, P. V. Dorovatovskiic y V. N. Khrustalev, «Formamidinium iodide: crystal structure and phase transitions,»
[127] Q. Han, S.-H. Bae, P. Sun, Y.-T. Hsieh, Y. M. Yang, Y. S. Rim, H. Zhao, Q. Chen, W. Shi, G. Li y Y. Yang, «Single crystal formamidinium lead iodide (FAPbI3): Insight into the structural, optical, and electrical properties,» Advanced Materials, vol. 28, nº 11, pp. 2253-2258, 2016.
[128] K. Cao, J. Cui, H. Zhang, H. Li, J. Song, Y. Shen, Y. Cheng y M. Wang, «Efficient mesoscopic perovskite solar cells based on the CH3NH3PbI2Br light absorber,»
Journal of Materials Chemistry A, vol. 3, p. 9116–9122, 2015.
[129] H. Sterling, «The crystal structures of the monomethyl ammonium halides,» de
Zeitschrift für Kristallographie - Crystalline Materials, vol. 67, De Gruyter, 1928, p.
106–118.
[130] E. J. Gabe, «The crystal structure of methylammonium bromide,» Acta
Crystallographica, vol. 14, p. 1296, 1961.
[131] I. Robinson y R. Harder, «Coherent X-ray diffraction imaging of strain at the nanoscale,» Nature Materials, vol. 8, pp. 291-298, 2009.
[132] A. Pramanick, X. P. Wang, C. Hoffmann, S. O. Diallo, M. R. V. Jørgensen y X. L. Wang, «Microdomain dynamics in single-crystal BaTiO3 during paraelectric- ferroelectric phase transition measured with time-of-flight neutron scattering,»
Physical Review B: Condensed matter and materials physics, vol. 92, p. 174103,
2015.
[133] G. K. Williamson y W. H. Hall, «X-ray line broadening from filed aluminum and wolfram,» Acta Metallurgica, vol. 1, pp. 22-31, 1953.
[134] A. Khorsand Zak, W. H. Abd. Majid, M. E. Abrishami y R. Yousefi, «X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods,» Solid State
Sciences, vol. 13, pp. 251-256, 2011.
[135] R. Yogamalar, R. Srinivasan, A. Vinu, K. Ariga y A. C. Bose, «X-ray peak broadening analysis in ZnO nanoparticles,» Solid State Communications, vol. 149, p. 1919–1923, 2009.
[136] R. Srinivasan, N. Rajeswari Yogamalar, R. Justin Joseyphus y A. Chandra Bose, «Estimation of lattice strain, stress, energy density and crystallite size energy density and crystallite size of the spherical yttrium oxide nanoparticles,» Functional
Materials Letters, vol. 2, nº 3, p. 131–134, 2009 .
[137] A. L. Patterson, «The Scherrer formula for X-ray particle size determination,»