1. Log in to the preconfigured standalone BEA WebLogic application server machine as the Solaris user created for the MDM Server installation (for example,motive).
Caution
Do not run the installation as therootuser, but ensure that the user created for the installation hasadministrative privileges. This is the accepted best practice on Solaris machines for security reasons.
Standalone MDM Server Setup
18
2. Make sure the installation.binfile is executable; if necessary, run the following command to make it
executable:Chmod +x ./MobileDeviceManager_Installer.bin.
3. Change your working directory to the one containing the installer executable. Launch the console MDM Server installation program by using the command./MobileDeviceManager_Installer.bin.
You should see the following output on the console:
bash-3.00# ./MobileDeviceManager_Installer_1_1_0_190_05032008.bin Preparing to install...
Extracting the installation resources from the installer archive... Configuring the installer for this system's environment...
Launching installer...
Preparing CONSOLE Mode Installation...
=============================================================================== Mobile Device Management Server 1.1.0(created with InstallAnywhere by Macrovision) ---
=============================================================================== Welcome
---
The Mobile Device Management Installer guides you through the installation and configuration of your Mobile Device Management Server.
It is strongly recommended that you quit all programs before continuing with this installation. You may cancel this installation at any time by clicking the 'Cancel' button.
Click the 'Next' button to proceed to the next screen. PRESS <ENTER> TO CONTINUE:
Press ENTER.
4. TheLicense Acceptanceinformation appears:
=============================================================================== License Acceptance
---
(license text omitted here)
->1- Agree 2- Disagree
19
Installing the MDM Server
ENTER THE NUMBER OF THE DESIRED CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:
Review the agreement. If you agree with the license terms, press ENTER to accept the default of1.
5. TheChoose Install Setoutput appears on the console:
=============================================================================== Choose Install Set
---
Please choose the Install Set to be installed by this installer. ->1- Single Standalone Server
2- Administration Server for Cluster 3- Managed Server for Cluster
ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT : 2
Enter2to install the MDM Administration server.
6. TheInstallation Directoryoutput appears on the console:
=============================================================================== Installation Directory
---
Where would you like to install Standalone Server? Default Install Folder: /DMSuite
ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT : /opt/mdm
INSTALL FOLDER IS: /opt/mdm IS THIS CORRECT? (Y/N): y
Enter the path to the directory where the MDM Server is to be installed, for example:/opt/mdmSingleServer.
Press ENTER.
7. TheBEA Home Directoryoutput appears on the screen. Enter the BEA home directory. For example:/opt/bea.
8. TheOracle Information - Usernameoutput appears on the console. Enter appropriate values in theEnter DM Suite Oracle username:field as described in“Configuration data for MDM Server installation on standalone
BEA WebLogic server” on page 13. Press ENTER when done.
You are prompted to enter the password for the Oracle user name you provided. Enter the password and press ENTER. You are prompted to confirm the password. Enter the password again and press ENTER.
You are prompted to enter the Hostname/IP address of the machine hosting the Oracle database server. Enter the value and press ENTER.
You are prompted to provide the port number for the Oracle database. Enter the port number and press ENTER.
Standalone MDM Server Setup
20
Enter the Oracle service name and TNS name as you are prompted for them.
9. TheJDK Home Directoryoutput appears on the screen. Enter the JDK home directory. For example:
/opt/bea/jdk150_04.
10. TheHostnameoutput appears on the screen. Enter the host name of the machine hosting the BEA WebLogic application server. Enter the port number and press ENTER.
TheWebLogic non-SSL Portoutput appears on the screen. Enter the non-SSL port number and press ENTER. TheWebLogic SSL Portoutput appears on the screen. Enter the SSL port number and press ENTER.
TheDM Suite Server External IP Addressoutput appears on the screen. Enter the IP address of the proxy server you are using and press ENTER
11. ThePhone Display - Trunk Code Optionoutput appears on the screen. Enter1if you want thetrunk codeto
be displayed on the phone; otherwise, enter2. Press ENTER.
ThePhone Display - Single/Multi Country Codeoutput appears on the screen. Enter1if you want a single country code to be used; otherwise, enter2for multiple country codes. Press ENTER.
ThePhone Display - Country ISO Codeoutput appears on the screen. Enter the ISO code of the country you are in and press ENTER.
12. TheGet Audit Logging Leveloutput appears on the screen.
■ Enter1if you do not want any audit information to be logged.
■ Enter2if you want an intermediate level of audit information to be logged.
■ Enter
3if you want high-level audit information to be logged.
Press ENTER.
13. TheExternal facing URL Host information output appears on the screen. Enter the fully qualified domain name of the external facing host, and press ENTER.
14. TheExternal facing URL non-ssl portoutput appears on the screen. Enter the non-SSL port number for the external facing host, and press ENTER.
15. TheExternal facing URL ssl portoutput appears on the screen. Enter the SSL port number of the external facing host and press ENTER.
16. TheExternal facing URL context pathoutput appears on the screen. Enter the context path to be appended to the redirected URL, and press ENTER. For example:/omadm/omadm.
17. TheCurrent Parametersoutput appears on the screen. Review the information that you have provided so far, and press ENTER to start the installation process.
21
Installing the MDM Server
18. TheInstallation Completeoutput appears on the screen. Press ENTER to exit the installer.
19. After the installation is successful, go toChapter 4, “Configuration and Post-Installation Activities” on page 53.