REQUERIMIENTOS Y NECESIDADES

Managing gateways in VoIP and Network Quality Manager is done on the Manage Gateways page. This page provides a list of all gateway nodes monitored by VNQM.

To access the Manage Gateway Nodes page:

1. Log in to the Orion Web Console as an administrator.

2. Select the VoIP and Network Quality tab, and then clickVoIP & Quality Settingsin the top right of the page.

3. ClickManage gatewaysin theVoIP Managementgrouping.

Notes:

l For polling gateway details, VNQM requires valid CLI credentials. l For adding gateway nodes to VNQM, the nodes already have to be in

your database.

Adding Gateways

If you want to monitor your gateways with VoIP and Network Quality Manager, you have to add them to VNQM as gateway nodes first.

The Add VoIP Gateway page provides a wizard which helps you to add a gateway node to VoIP and Network Quality Manager as a gateway. Gateway nodes require CLI credentials.

To add a gateway device to VoIP and Network Quality Manager:

1. Log in to the Orion Web Console as an administrator.

2. Select the VoIP and Network Quality tab, and then clickVoIP & Quality Settingsin the top right of the page.

3. ClickAdd gatewaysin theVoIP Managementgrouping.

4. Select VoIP Gateways to Add:Select one or more available nodes which you want to add to VNQM as gateways.

Note:If you do not see an expected device, clickadd your nodesto add it to the Orion database, and then repeatSteps 1 - 3. For more

information about adding nodes to the Orion database, seeAdding Devices for Monitoring in the Web Consolein theSolarWinds Network Performance Monitor Administrator Guide.

5. ClickNext.

6. TheCLI Credentials Issuesdialog pops up with details about CLI credential issues on the nodes you are adding. Modify CLI credentials to solve the issues:

a. Select the node or nodes whose CLI credentials you want to edit.

Note:If you want to use the same CLI credentials for all nodes with issues, clickSelect Errors. All nodes will be selected.

b. ClickEdit Credentials.

l Select valid credentials in theSelect Credentialslist or define a

new set of credentials in theUsernameandPasswordfields.

l ClickSaveto apply your CLI credential settings on the selected

nodes.

c. ClickSelect Successfulto select nodes whose CLI credentials have been updated successfully.

d. ClickContinueto add the selected nodes to VNQM as gateway nodes.

7. Review the information, and then clickFinishto add the selected gateways, or clickBackto make changes.

Editing VoIP Gateways

You can edit the gateway node details, such as the node name, polling details, dependencies or custom properties.

To edit gateway node properties:

1. Log in to the Orion Web Console as an administrator.

2. ClickVoIP & Quality Settingsin the top right of the VoIP and Network Quality tab.

3. Click Manage gateways.

4. Select one or more available gateways that you want to edit.

Note:If you do not see an expected device, clickadd your nodesto add it to the Orion database, and then repeatSteps 1 - 3. For more

information about adding nodes to the Orion database, seeAdding Devices for Monitoring in the Web Consolein theSolarWinds Network Performance Monitor Administrator Guide.

5. Edit the appropriate properties of the selected gateway node. For more information about editing nodes, seeEditing Object Propertiesin the SolarWinds Network Performance Monitor Administrator Guide. 6. ClickSubmitto apply your changes.

Editing CLI Credentials for Gateway Nodes

For monitoring gateway nodes, VNQM uses CLI credentials.

To edit CLI credentials, complete the following steps:

1. Log on to your VoIP and Network Quality Manager server using an account with administrator privileges.

2. ClickVoIP & Quality Settingsin the top right of the VoIP and Network Quality tab.

3. ClickManage Gateways.

4. Select the node you want to edit, and then clickEdit CLI Credentials. Editing CLI Credentials for Gateway Nodes

5. Select the appropriate settings from theSelect Credentialslist or define new credentials.

To define a new set of CLI credentials:

l Select Credentials:Type the name of the new credential set. l Username:Type the user name.

l Password:Type the password.

l Enable Level:Select the enable level to use when logging in.

Note:The enable level must have privileges to execute terminal commands. VoIP and Network Quality Manager uses Show commands to fetch and display data from the gateway. For information about configuring network devices, see your manufacturer’s documentation.

l Enable Password:Type the password associated with the enable

level to use when logging in.

6. ExpandAdvanced, and then select theProtocol,Port Number, and

Connection Timeoutyou want to use when connecting to your network devices.

7. ClickTestto test the credentials. 8. ClickSaveto apply your changes.

Removing Gateways

If you want to stop monitoring the PRI trunk utilization of a gateway, remove the gateway from VNQM.

To remove gateway nodes from VNQM:

1. Log in to the Orion Web Console as an administrator.

2. ClickVoIP & Quality Settingsin the top right of the VoIP and Network Quality tab.

3. ClickManage gateways.

4. Select one or more gateways that you want to remove. 5. ClickRemove Gateways, and then clickOKto confirm.