Resum dels recursos hídrics disponibles (utilitzats i potencials) de la ciutat (2009)

The CPF180i and the CPF300i have the capability to store 20 individual Tracks and record up to 10000 Track Points.

Before using the Track function you will need to setup the Track function that suits your boat. The Track function records your tracks your vessels location as it moves through the water. The Track function can be setup to lay down a Track for a predetermined time or distance interval. If you have a fast moving boat you may want to setup the CPF180i or CPF300i to record a Track point every 0.5Nm or if you have a sail boat you may want to setup to lay down a Track point once every 1 minute.

NOTE

Please note the Track point memory capacity is 10,000 points. This means for a long journey you may have to adjust the time or distance to be able to track your journey. It should be noted when the 10,000 Track points are used up, the first Track point layed down will be deleted when a new point is placed on the chart.

1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].

3. Move the ShuttlePoint knob to highlight STEP UNIT and press [ENT] or move the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob to highlight Dist or Time and press [ENT] or move the ShuttlePoint knob to the right.

Figure 10 - Distance Units and Time Units

5. Move the ShuttlePoint knob to highlight DISTANCE or TIME step interval and press [ENT] or move the ShuttlePoint knob to the right.

6. Move the ShuttlePoint knob up/down to the desired step value and press [ENT] or move the ShuttlePoint knob to the right.

7. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

10.0 TRACKING

When using the tracking feature you will notice every time a Track Point is layed down on the Chart page a small filled in circle is shown on the Track line. If you move the cursor over the top of the circle a popup window will be shown with the Time, Water Temperature, Speed and Course Over Ground (COG). This is very useful if you are fishing and want to review the conditions where the fish were being caught.

Figure 10.0 - Tracking

10.0.0 Saving and starting a new Track

A Track is automatically saved and retained in memory when the power is turned off. To start a new Track:

1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].

3. Move the ShuttlePoint knob to highlight ACTIVE TRACKand press [ENT] or move the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob up/down to select the next available open Track and press [ENT] or move the ShuttlePoint knob to the right.

5. Move the ShuttlePoint knob to highlight TRACKING and press [ENT] or move the ShuttlePoint knob to the right to set On.

6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 7. A new Track now will be laid down.

10.0.1 Deleting a Track

To delete a Track:

1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press [ENT].

2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].

3. Move the ShuttlePoint knob to highlight DELETE and press [ENT] or move the ShuttlePoint knob to the right.

4. A warning popup window will be shown to confirm if you want to reset the Track. Move the ShuttlePoint knob to highlight YES and press [ENT] or move the ShuttlePoint knob to the right. The Track is now deleted.

5. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

10.0.2 Other settings

You will notice the Trackmenu has other selections:

TRACKING Allows turning On or Off the Tracking function

ACTIVE TRACK Allows saving a Track to one of the 20 Tracks available

VISIBLE Shows or hides a Track shown in ACTIVE TRACK menu

LINE COLOR Selects the color of the Track line

DELETE Deletes a Track selected in the ACTIVE TRACK menu

DISTANCE User adjustable Distance interval of when Track point is laid down on the Chart page.

TIME User adjustable Time interval of when Track point is laid down on the Chart page.

10.1 TRIP LOG

10.1.0 Using the Trip Log

On the Chart, Navigation, Highway, NMEA, Fish Finder and GPS Status Data pages the windows may be customized to show Trip Log information.

1. Select one of the pages listed above, press and hold [MENU]. You will notice one of the data boxes will be highlighted.

2. Press [ENT] and move the ShuttlePoint knob to highlight TLOG, press [ENT] or move the ShuttlePoint knob to the right.

3. A popup window will be shown with Nm (Nautical Mile), Sm (Statute Mile), Km (Kilometre) and RESET. Move the ShuttlePoint knob to select the desired units of measure and press [ENT] or move the ShuttlePoint knob to the right.

4. Press [CLR] or move the ShuttlePoint knob to the right until the selected page (Chart, Navigation, Highway or NMEA Data page) is shown.

10.1.1 Setup / Reset

When Trip Log is selected in one of the data windows and you want to reset the log: 1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame). 2. Move the ShuttlePoint knob to highlight the Trip Log window TLOG and press [ENT]. 3. A popup window will be shown. Move the ShuttlePoint knob to TLOG and press [ENT]. 4. Another popup window will be shown. Move the ShuttlePoint knob to RESET and press

[ENT].

5. A warning popup window will be shown to confirm if you want to reset the Trip Log. Move the ShuttlePoint knob to highlight YES and press [ENT]. The Trip Log is now reset. 6. Press [CLR] to store and exit the editing mode.